ຄູ່ມືຜູ້ໃຊ້: ກຸນແຈປະຕູໄຟຟ້າ Satin Nickel ທີ່ເຊື່ອຖືໄດ້ ພ້ອມແປ້ນພິມ ແລະ ມືຈັບປະຕູທາງຜ່ານ

ແນະນຳ

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Reliablit Satin Nickel Electronic Deadbolt with Keypad and Passage Door Handle. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

ຮູບພາບ: ທາງຫນ້າ view of the Reliablit electronic deadbolt and the accompanying passage door handle in satin nickel finish.

ຂໍ້ມູນຄວາມປອດໄພ

• ປະຕິບັດຕາມລະຫັດອາຄານ ແລະກົດລະບຽບທ້ອງຖິ່ນສະເໝີໃນລະຫວ່າງການຕິດຕັ້ງ.
• Do not use abrasive cleaners or solvents on the lock's finish. Use a soft, damp ຜ້າ​ສໍາ​ລັບ​ການ​ທໍາ​ຄວາມ​ສະ​ອາດ​.
• Ensure batteries are inserted with correct polarity. Replace all batteries at the same time.
• ຮັກສາກະແຈຢູ່ໃນສະຖານທີ່ທີ່ປອດໄພຫ່າງຈາກລັອກ.
• Avoid exposing the electronic components to excessive moisture or extreme temperatures.

ເນື້ອໃນຊຸດ

Before beginning installation, verify that all parts are present:

• Electronic Deadbolt Assembly (Exterior Keypad and Interior Unit)
• Passage Door Handle Assembly
• Deadbolt Latch
• ແຜ່ນປະທ້ວງ
• screws ການຕິດຕັ້ງ
• Keys (for deadbolt)
• ຄູ່ມືຜູ້ໃຊ້
• 1 x 9V Battery (may be included or sold separately, check packaging)
• Screwdriver (may be included or sold separately, check packaging)

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

The Reliablit electronic deadbolt and passage handle are designed for easy installation, typically requiring only a screwdriver. Ensure your door thickness is between 1-3/8 inches and 1-3/4 inches.

1. ກະກຽມປະຕູ

Ensure the door is properly prepped with standard bore holes for both the deadbolt and the passage handle. If replacing an existing lock, remove the old hardware.

2. Install the Deadbolt Latch

Insert the deadbolt latch into the edge bore hole of the door. Ensure the "UP" arrow on the latch is facing upwards. Secure with screws.

ຮູບພາບ: ໃກ້ຊິດ view of the electronic keypad deadbolt, showing the numerical buttons and keyhole.

3. Install the Exterior Keypad Assembly

Feed the cable from the exterior keypad through the cross bore hole. Align the keypad assembly with the deadbolt latch and secure it to the door.

ຮູບພາບ: ຂ້າງ view of the electronic deadbolt and passage handle installed on a door, demonstrating how the components fit together.

4. Install the Interior Unit

Connect the cable from the exterior keypad to the interior unit. Mount the interior unit onto the door, ensuring the deadbolt spindle engages correctly with the latch mechanism. Secure with mounting screws.

5. ຕິດຕັ້ງແບັດເຕີລີ

Open the battery cover on the interior unit. Insert one 9V battery, ensuring correct polarity. Close the battery cover. The lock will perform a self-check.

6. Install Passage Door Handle

Follow the manufacturer's instructions for installing the passage door handle below the deadbolt. This typically involves inserting the spindle through the door and securing the interior and exterior levers.

ຮູບພາບ: ໃກ້ຊິດ view of the passage door handle in satin nickel finish.

ຄໍາແນະນໍາການດໍາເນີນງານ

Keyless ເຂົ້າ

To unlock the deadbolt using the keypad:

1. Enter your programmed user code (4-8 digits).
2. Press the "Lock/Unlock" button (often represented by a padlock icon).
3. The deadbolt will retract, allowing the door to be opened.

ການລັອກແບບດຽວ

To lock the deadbolt from the outside:

• Simply press the "Lock/Unlock" button on the keypad. The deadbolt will extend.

ການດໍາເນີນງານຄູ່ມື

• ຈາກພາຍນອກ: Use the provided key to manually lock or unlock the deadbolt.
• ຈາກພາຍໃນ: Use the turn button on the interior unit to manually lock or unlock the deadbolt.

ລະຫັດຜູ້ໃຊ້ການຂຽນໂປຼແກຼມ

The lock supports up to 30 unique user codes. Refer to the specific programming instructions included with your lock for detailed steps on adding, deleting, or modifying user codes. This typically involves using a master code to enter programming mode.

ບໍາລຸງຮັກສາ

• ການປ່ຽນແບັດເຕີຣີ: The 9V battery typically lasts up to 3 years. Replace the battery when the low battery indicator activates (if applicable) or if the lock's operation becomes sluggish. Always replace with a new, high-quality 9V alkaline battery.
• ທໍາຄວາມສະອາດ: Clean the lock's exterior with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used. Avoid harsh chemicals, abrasive cleaners, or polishes as they can damage the finish and electronic components.
• ການລະບາຍສີ: Periodically lubricate the deadbolt latch mechanism with a silicone-based lubricant to ensure smooth operation. Do not lubricate the keypad or electronic components.

ການແກ້ໄຂບັນຫາ

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

RELIABILT provides a comprehensive warranty for this product:

• Mechanical and Finish Warranty: ການຮັບປະກັນຕະຫຼອດຊີວິດ.
• Electronics Warranty: ຮັບປະກັນ 1 ປີ.

For full details regarding warranty coverage, terms, and conditions, please refer to the official RELIABILT warranty documentation or visit the RELIABILT website. For technical support, troubleshooting assistance, or warranty claims, please contact RELIABILT customer service directly.