OONO DIN Rail Mount 16 LEDs Indicator Light Module

ແນະນຳ

This manual provides comprehensive instructions for the installation, operation, and maintenance of your OONO DIN Rail Mount 16 LEDs Indicator Light Module. This module is designed for industrial and electrical applications, offering clear visual indication with 16 independent LED channels. Please read this manual thoroughly before use to ensure proper and safe operation.

ຂໍ້ມູນຄວາມປອດໄພ

• Always disconnect power before installing, wiring, or performing maintenance on the module.
• ຮັບປະກັນສາຍໄຟທັງໝົດສອດຄ່ອງກັບລະຫັດໄຟຟ້າໃນທ້ອງຖິ່ນ ແລະແຫ່ງຊາດ.
• This module operates with DC voltage. Verify correct polarity before applying power.
• Do not exceed the specified operating voltage ລະດັບຂອງ 5VDC ກັບ 50VDC.
• Avoid exposing the module to excessive moisture, dust, or extreme temperatures.
• ມີພຽງແຕ່ພະນັກງານທີ່ມີຄຸນວຸດທິເທົ່ານັ້ນທີ່ຄວນປະຕິບັດການຕິດຕັ້ງ ແລະ ສາຍໄຟ.

ສິນຄ້າເກີນview

The OONO D-1003T Series is a 16-channel LED indicator light module featuring 5mm blue LEDs. It supports both Common Positive and Common Negative control modes, making it versatile for various circuit designs. The module is equipped with 5.0mm pitch screw terminal blocks for secure wire connections and comes with a high-quality fireproof nylon DIN rail mount carrier.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• 16 independent LED indicator channels.
• ປະລິມານການດໍາເນີນງານກ້ວາງtagລະດັບ e: 5VDC ຫາ 50VDC.
• Supports Common Positive and Common Negative control.
• Robust 5.0mm pitch screw terminal blocks.
• DIN rail mountable (35mm, 32mm, 15mm compatible) with detachable carrier for panel mounting.
• FR-4 fiber glass PCB for durability.

ອົງປະກອບ:

• 16 x 5mm Blue LEDs
• Input Terminal Blocks (Channels 1-8, 9-16, COM)
• DIN Rail Mount Carrier
• FR-4 PCB

ຮູບ 1: ເທິງລົງລຸ່ມ view of the 16-LED indicator module, showing the LED array and terminal blocks.

Figure 2: Angled perspective of the module, highlighting its compact design and integrated DIN rail mounting mechanism.

ຂໍ້ມູນຈໍາເພາະ

Figure 3: Detailed dimensional drawing of the module, showing key measurements in millimeters.

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

ມີຫຍັງຢູ່ໃນກ່ອງ:

• 1 x DIN rail mount indicator light module

ການ​ຕິດ​ຕັ້ງ​ໂມ​ດູນ​:

The module is designed for easy installation on standard DIN rails (35mm, 32mm, or 15mm). The carrier can also be detached for panel mounting applications.

1. ການຕິດຕັ້ງລົດໄຟ DIN: Align the module's clips with the DIN rail. Press down firmly until the module snaps securely onto the rail. Ensure it is seated properly and does not wobble.
2. ການຕິດຕັ້ງແຜງ: The DIN rail carrier can be disassembled from the main PCB. Once detached, the PCB can be mounted directly to a panel using appropriate standoffs or screws (not included).

Figure 4: The indicator module securely mounted on a standard DIN rail, ready for wiring.

ຄຳແນະນຳການສາຍ:

The module features 5.0mm pitch screw terminal blocks for connecting input signals. Each LED channel (1-16) has a dedicated input terminal, and there is a common (COM) terminal.

1. ກະກຽມສາຍໄຟ: Strip approximately 7mm (0.28 inches) of insulation from the ends of your wires (26 to 12AWG / 2.5mm²).
2. ເຊື່ອມຕໍ່ອິນພຸດ: Loosen the screws on the desired terminal blocks. Insert the stripped wire ends fully into the terminal openings. Tighten the screws to secure the wires. Gently tug on the wires to ensure a firm connection.
3. Common Connection: Connect the common return path of your control circuit to the "COM" terminal.

ຮູບທີ 5: ໄລຍະໃກ້ view of the screw terminal blocks, indicating channel numbers and the common terminal.

ຮູບແບບການເຮັດວຽກ

The OONO D-1003T Series supports both Common Positive and Common Negative control configurations. This flexibility allows integration into various existing control systems.

Common Positive Control:

In this mode, the "COM" terminal is connected to the positive supply voltage. Each individual channel terminal (1-16) is then connected to the negative side of the control signal. When a channel's input is pulled low (connected to ground or negative supply), the corresponding LED will illuminate.

• Connect the positive supply (e.g., +5VDC to +50VDC) to the COM ສະຖານີ.
• Connect the negative side of your control signal for each channel (1-16) to its respective input terminal.
• LED illuminates when the input terminal is connected to the negative potential.

Common Negative Control:

In this mode, the "COM" terminal is connected to the negative supply voltage (ground). Each individual channel terminal (1-16) is then connected to the positive side of the control signal. When a channel's input is pulled high (connected to positive supply), the corresponding LED will illuminate.

• Connect the negative supply (e.g., Ground) to the COM ສະຖານີ.
• Connect the positive side of your control signal for each channel (1-16) to its respective input terminal.
• LED illuminates when the input terminal is connected to the positive potential.

Figure 6: Internal circuit diagram illustrating the connection of LEDs and resistors to the input and common terminals.

ບໍາລຸງຮັກສາ

The OONO DIN Rail Mount 16 LEDs Indicator Light Module is designed for long-term, maintenance-free operation. However, periodic checks can help ensure optimal performance.

• ທໍາຄວາມສະອາດ: If necessary, gently wipe the module with a dry, soft cloth to remove dust. Do not use liquid cleaners or solvents.
• ກວດສອບການເຊື່ອມຕໍ່: Periodically inspect terminal block screw connections to ensure they remain tight and secure. Loose connections can lead to intermittent operation or damage.
• ເງື່ອນໄຂສິ່ງແວດລ້ອມ: Ensure the operating environment remains within the specified temperature and humidity ranges to prevent premature component degradation.

ການແກ້ໄຂບັນຫາ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the official OONO webເວັບໄຊ ຫຼືຕິດຕໍ່ຜູ້ຈັດຈໍາໜ່າຍທີ່ໄດ້ຮັບອະນຸຍາດຂອງທ່ານ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.

ຜູ້ຜະລິດ: CZH-LABS

ຍີ່ຫໍ້: OONO

ສໍາລັບການຊ່ວຍເຫຼືອເພີ່ມເຕີມ, ທ່ານສາມາດໄປຢ້ຽມຢາມໄດ້ OONO Store on Amazon.