ຄູ່ມືການສອນເຄື່ອງເຮັດນ້ຳກ້ອນ Silonn SLIM31T

ແນະນຳ

This manual provides comprehensive instructions for the safe and efficient operation and maintenance of your Silonn SLIM31T Countertop Ice Maker. This appliance is designed to produce clear ice cubes for various uses, offering convenience and a steady supply of ice.

Key features include a daily ice production capacity of 44 lbs, two convenient methods for water input, and an automatic self-cleaning function. The unit produces crystal-clear ice cubes that melt slowly, are odor-free, and cause less dilution in beverages.

ຂໍ້ມູນຄວາມປອດໄພ

ເອົາໃຈໃສ່:

• Please put the ICE MAKER upright for 24 hours before plugging it in. This is an important procedure for producing great ice and allowing the refrigerant to settle.
• DANGER - Risk of Fire or Explosion. Flammable Refrigerant Used.
• ຢ່າໃຊ້ອຸປະກອນກົນຈັກເພື່ອເຮັດເຄື່ອງເຮັດນ້ຳກ້ອນ.
• ຫ້າມເຈາະທໍ່ຕູ້ເຢັນ.
• ຮັບປະກັນການລະບາຍອາກາດທີ່ເຫມາະສົມຮອບຫນ່ວຍ. ຫ້າມປິດຊ່ອງລະບາຍອາກາດ.

ຕັ້ງຄ່າ

Unboxing ແລະການຈັດວາງເບື້ອງຕົ້ນ

Carefully remove the ice maker from its packaging. The unit is protected by styrofoam and a clear plastic film over the stainless steel surfaces. Remove all packaging materials, including any tape or film.

Place the ice maker on a stable, level countertop. Ensure there is adequate space around the unit for proper ventilation. Avoid placing it near heat sources or in direct sunlight.

ທໍາຄວາມສະອາດເບື້ອງຕົ້ນ

Before first use, it is recommended to clean the interior of the ice maker. Use a soft cloth with warm water and a mild detergent. Rinse thoroughly and drain any remaining water.

Water Filling Options

Your Silonn ice maker offers two convenient ways to add water:

1. ການຕື່ມນ້ໍາຄູ່ມື: Open the top lid and pour potable water directly into the water reservoir up to the 'MAX' fill line.
2. Water Bottle Connection: Connect a compatible water bottle to the designated port on top of the ice maker. This provides a continuous water supply. (Note: Water bottle is not included.)

Unboxing and Water Filling Video

Video: This video demonstrates the unboxing process of the Silonn ice maker, including the removal of packaging materials and the initial steps for filling the water reservoir.

ຄໍາແນະນໍາການດໍາເນີນງານ

ເປີດ/ປິດ

Press the 'ON/OFF' button on the control panel to start or stop the ice maker.

ຂະບວນການເຮັດນ້ຳກ້ອນ

Once powered on and water is added, the machine will begin the ice-making cycle. It can produce 24 ice cubes in approximately 13 minutes, with a daily output of up to 44 lbs. The ice cubes are clear and melt slowly.

ການຄວບຄຸມຄວາມໜາຂອງນ້ຳກ້ອນ

You can customize the thickness of your ice cubes to suit your preference:

• ນ້ຳກ້ອນບາງໆ: Approximately 11 minutes, ideal for blended smoothies.
• ນ້ຳກ້ອນປານກາງ: Approximately 15 minutes, suitable for preserving food.
• ນ້ຳກ້ອນໜາ: Approximately 20 minutes, perfect for chilling beverages.

Ice Full and Water Low Indicators

The ice maker is equipped with sensors to monitor ice levels and water levels:

• When the ice basket is full, the machine will automatically pause ice production.
• When the water reservoir is low, the machine will indicate this and pause operation until water is refilled.

ການເກັບຮັກສາກ້ອນ

Please note that this ice maker is not a freezer. The ice produced will gradually melt if left in the ice basket. For long-term storage, transfer the ice cubes to a freezer immediately after they are made.

ບໍາລຸງຮັກສາ

ການທໍາຄວາມສະອາດດ້ວຍຕົນເອງອັດຕະໂນມັດ

The ice maker features a convenient 20-minute automatic cleaning cycle. To activate, simply press the 'CLEAN' button on the control panel. This function helps maintain hygiene and prolong the machine's lifespan.

ການທໍາຄວາມສະອາດດ້ວຍມື

For thorough cleaning, especially if mineral buildup occurs:

• ຖອດປລັກເຄື່ອງອອກ ແລະຖອດກະຕ່ານ້ຳກ້ອນອອກ.
• Clean the interior surfaces, including the water reservoir and the ice-making components, with a soft cloth and a solution of water and vinegar or a mild, food-safe cleaner.
• Pay attention to the back section where water circulates, as mineral deposits can accumulate there.
• ລ້າງສ່ວນປະກອບທັງໝົດຢ່າງລະອຽດດ້ວຍນ້ຳສະອາດ.

ການລະບາຍນ້ໍາ

To drain the water from the reservoir, locate the drain plug at the bottom of the unit. Remove the plug to allow water to flow out. Ensure the unit is placed over a sink or a container to collect the water.

ການແກ້ໄຂບັນຫາ

• ບໍ່ມີການຜະລິດກ້ອນ: Check if the unit is plugged in, powered on, and has sufficient water in the reservoir. Ensure the ambient temperature is within the recommended operating range.
• ສິ່ງລົບກວນທີ່ຜິດປົກກະຕິ: This can sometimes be caused by mineral buildup. Perform a thorough cleaning cycle, both automatic and manual, focusing on the water circulation areas.
• Ice Melting Quickly: The ice maker is not a freezer. Ice will melt over time if not transferred to a freezer. Ensure the lid is properly closed to minimize melting.
• ນ້ຳຮົ່ວ: Check the drain plug to ensure it is securely in place. Inspect the water lines for any damage or loose connections if using the water bottle attachment.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Silonn is committed to customer satisfaction and stands behind the quality of its products. In the event of any issues or concerns with your ice maker, please contact Silonn customer support. They are dedicated to assisting users and ensuring proper functionality of their appliances.

For specific warranty details and contact information, please refer to the documentation included with your product or visit the official Silonn webເວັບໄຊ.