ແນະນຳ
This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your CREWORKS 3L Ultrasonic Cleaner. Please read this manual thoroughly before initial use and retain it for future reference.
ຂໍ້ຄວນລະວັງຄວາມປອດໄພ
- ຢ່າ disassemble ຫນ່ວຍງານ.
- Do not use flammable or corrosive liquids.
- Always use sufficient fluid to cover items.
- Unplug before filling & draining.
- ໃຫ້ແນ່ໃຈວ່າເຄື່ອງໄດ້ຖືກວາງຢູ່ເທິງພື້ນຜິວທີ່ມີລະດັບຄວາມຫມັ້ນຄົງ.
- ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
Figure 1: CREWORKS 3L Ultrasonic Cleaner with its digital control panel and open lid, showcasing the stainless steel tank.
ແມ່ນຫຍັງຢູ່ໃນກ່ອງ
ພາຍຫຼັງການຫຸ້ມຫໍ່, ໃຫ້ກວດເບິ່ງວ່າອົງປະກອບທັງໝົດມີຢູ່ ແລະ ບໍ່ເສຍຫາຍ:
- 1 x Ultrasonic Cleaner Unit
- ກະຕ່າເຫຼັກສະແຕນເລດ 1 x
- ສາຍໄຟຟ້າ 1 x
- 1 x ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
ຕັ້ງຄ່າ
- ການຈັດວາງ: Place the ultrasonic cleaner on a firm, level, and dry surface, away from direct sunlight and heat sources. Ensure adequate ventilation around the unit.
- ການເຊື່ອມຕໍ່ພະລັງງານ: Connect the power cord to the unit and then to a grounded electrical outlet. Ensure the power switch on the back of the unit is in the OFF position before plugging in.
- ການຕື່ມຖັງ: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. The liquid level should be between the MIN and MAX marks, ensuring items to be cleaned are fully submerged but not overflowing. Do not operate the unit without liquid in the tank.
- Inserting Items: Place items to be cleaned into the stainless steel basket. Lower the basket gently into the tank. Avoid direct contact of items with the tank bottom to ensure optimal cavitation.
Figure 2: Close-up of the intuitive digital control panel, displaying temperature and timer settings for easy operation.
ຄໍາແນະນໍາການດໍາເນີນງານ
- ເປີດ: Flip the main power switch located on the back of the unit to the ON position. The digital display will illuminate.
- ຕັ້ງຄ່າອຸນຫະພູມ: Press the "TEMP" button to adjust the desired cleaning solution temperature. Use the up/down arrows to set the temperature between 68°F and 176°F (20°C and 80°C). The unit will begin heating automatically.
- ຕັ້ງເວລາ: Press the "TIME" button to adjust the desired cleaning duration. Use the up/down arrows to set the timer for up to 30 minutes.
- ເລີ່ມທໍາຄວາມສະອາດ: Once temperature and time are set, the ultrasonic cleaning process will begin. The display will show the remaining time.
- ໃນລະຫວ່າງການປະຕິບັດງານ: The unit will produce a slight humming sound and visible cavitation bubbles. This is normal. Avoid touching the tank or solution during operation.
- ສິ້ນສຸດຮອບວຽນ: ເຄື່ອງຈະຢຸດອັດຕະໂນມັດເມື່ອໂມງຈັບເວລາຮອດສູນ.
- ລຶບລາຍການອອກ: Carefully lift the basket out of the tank. Rinse the cleaned items under clean water and dry them thoroughly.
Figure 3: Illustration of the powerful ultrasonic cavitation process, where 40 kHz frequency sound waves create microscopic bubbles that implode, effectively cleaning intricate surfaces.
Figure 4: Visual comparison demonstrating the effective cleaning results on various items, including eyeglasses, a razor, and a circuit board.
ບໍາລຸງຮັກສາ
- ການລະບາຍຖັງ (Draining the Tank): After each use, especially if the solution is dirty, unplug the unit and drain the liquid using the built-in drain valve. Tilt the unit slightly towards the drain for complete emptying.
- ທໍາຄວາມສະອາດຖັງໄດ້: Rinse the stainless steel tank with clean water. Wipe the interior and exterior of the unit with a soft, damp ຜ້າ. ຫ້າມໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືຈຸ່ມຫົວໜ່ວຍຫຼັກໃນນ້ຳ.
- ການເກັບຮັກສາ: Store the unit in a cool, dry place when not in use. Ensure the tank is completely dry before storage.
- ການທົດແທນຟິວ: In case of power issues, check the fuse located near the power inlet. Replace with a fuse of the same rating if necessary. (Note: Refer to the product's electrical specifications for fuse type and rating).
Figure 5: Key design features contributing to durability and stable operation, including the robust stainless steel basin, noise-reducing cover, and non-skid rubber feet.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ຫນ່ວຍບໍລິການບໍ່ເປີດ. | Power cord not connected; Power switch off; Blown fuse. | Ensure power cord is securely plugged in; Turn power switch ON; Check and replace fuse if necessary. |
| No ultrasonic sound/cavitation. | Insufficient liquid; Unit not started; Malfunction. | Ensure liquid level is adequate; Press start button; Contact customer support if problem persists. |
| ຜົນໄດ້ຮັບການເຮັດຄວາມສະອາດບໍ່ດີ. | Incorrect cleaning solution; Insufficient cleaning time; Overloaded tank; Items touching tank bottom. | Use appropriate cleaning solution for items; Increase cleaning time; Do not overload; Use basket to suspend items. |
| ຟັງຊັນການໃຫ້ຄວາມຮ້ອນບໍ່ເຮັດວຽກ. | Temperature not set; Heater malfunction. | Set desired temperature using the control panel; Contact customer support if problem persists. |
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | DUC-1003-00 |
| ປະລິມານຖັງ | 3 ລິດ (0.8 ລິດ) |
| ພະລັງງານ Ultrasonic | 120W |
| ພະລັງງານຄວາມຮ້ອນ | 100W |
| ຄວາມຖີ່ Ultrasonic | 40 kHz |
| ຊ່ວງອຸນຫະພູມ | 68-176°F (20-80°C) |
| ຊ່ວງເວລາຈັບເວລາ | 1-30 ນາທີ |
| ວັດສະດຸຖັງ | Food-Grade 304 Stainless Steel |
| ຂະໜາດສິນຄ້າ | 13.5 x 7.6 x 11.81 ນິ້ວ |
| ນ້ໍາຫນັກລາຍການ | 7.41 ປອນ |
Figure 6: Detailed dimensions of the ultrasonic cleaner unit and its removable cleaning basket.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
CREWORKS stands behind the quality of its products. This ultrasonic cleaner comes with a 1-Year Promiseສຳລັບຄຳຖາມໃດໆ, ການຊ່ວຍເຫຼືອດ້ານເຕັກນິກ, ຫຼື ການຮຽກຮ້ອງການຮັບປະກັນ, ກະລຸນາຕິດຕໍ່ຫາພວກເຮົາ ບໍລິການລູກຄ້າ 24/7. Refer to the product packaging or the official CREWORKS webເວັບໄຊທ for ສໍາລັບລາຍລະອຽດການຕິດຕໍ່.
For more information and support, visit the official CREWORKS Store: CREWORKS Store on Amazon.
