1. ຜະລິດຕະພັນເກີນview
The Atletica R7 Nemesis Stack Weight Rack is a robust and versatile fitness solution designed for comprehensive strength training. This equipment integrates a squat rack, multipress, 125 kg stack weight system, pull-up bar, and a deadlift station, providing a complete workout experience within a compact footprint. Constructed with 70mm square tubes and a 2.5mm thickness, the R7 Nemesis ensures stability and safety during intense workouts.
ຄຸນນະສົມບັດທີ່ສໍາຄັນປະກອບມີ:
- Integrated Multipress and Pull-Up System: Allows for guided squats, bench presses, and various pull-up exercises.
- 125 kg Stack Weight: Provides adjustable resistance for cable exercises.
- Deadlift Station with Safety Straps: Designed for quiet and safe deadlifts, protecting both equipment and flooring.
- High-Capacity J-Hooks and Spotter Arms: Performance J-hooks support up to 1100 kg per pair, and spotter arms support up to 350 kg per pair, featuring hard plastic protection.
- ການອອກແບບທີ່ມີປະສິດທິພາບພື້ນທີ່: Accommodates a weight bench inside the rack, maximizing your training area.
- ການກໍ່ສ້າງທົນທານ: Laser-cut, welded, and double powder-coated for enhanced durability and rust protection.
ຮູບ 1: ດ້ານຫນ້າ view of the Atletica R7 Nemesis Stack Weight Rack, showcasing the integrated multipress and weight stack.
2. ຂໍ້ມູນຄວາມປອດໄພ
Before using the Atletica R7 Nemesis Stack Weight Rack, please read and understand all safety instructions. Failure to follow these instructions may result in serious injury or equipment damage.
- ປຶກສາແພດ: ປຶກສາກັບຜູ້ຊ່ຽວຊານດ້ານສຸຂະພາບສະເໝີ ກ່ອນທີ່ຈະເລີ່ມໂຄງການອອກກຳລັງກາຍໃໝ່.
- ສະພາແຫ່ງທີ່ເຫມາະສົມ: Ensure the rack is assembled correctly and all bolts are securely tightened according to the assembly guide.
- ພື້ນຜິວຄົງທີ່: Place the equipment on a flat, stable, and non-slip surface. Rubberized feet protect your floor and enhance stability.
- ກວດສອບກ່ອນການນໍາໃຊ້: Before each workout, inspect the rack for any loose parts, damaged cables, or worn components. Do not use if any damage is found.
- Use Spotters: When performing heavy lifts, especially squats and bench presses, always use the spotter arms and consider having a human spotter.
- Correct Form: Maintain proper exercise form to prevent injuries. If unsure, seek guidance from a qualified fitness instructor.
- ຈຳກັດນ້ຳໜັກ: Do not exceed the maximum weight capacities for J-hooks (1100 kg per pair) and spotter arms (350 kg per pair).
- ເດັກນ້ອຍແລະສັດລ້ຽງ: Keep children and pets away from the equipment during use and when unsupervised.
- ການເກັບກູ້: Ensure adequate clearance around the rack for safe movement and exercise.
3. ການຕິດຕັ້ງແລະການປະກອບ
The Atletica R7 Nemesis Stack Weight Rack requires assembly. Refer to the detailed assembly manual included with your purchase for step-by-step instructions. The following provides a general overview:
- Unpack ອົງປະກອບ: Carefully unpack all parts and verify against the parts list in your assembly manual.
- ພື້ນທີ່ກະກຽມ: Choose a suitable location with sufficient space and a level floor.
- ກອບປະກອບ: Begin by assembling the main uprights and base frame. Ensure all connections are secure but do not fully tighten bolts until the entire frame is assembled.
- ຕິດຕັ້ງໄຟລ໌ແນບ: Attach the multipress guide rails, pull-up bar, deadlift station, and weight stack system.
- ການກຳນົດເສັ້ນທາງສາຍ: Carefully route all cables through the pulleys as instructed in the assembly manual, ensuring they are not twisted or pinched.
- ການເຄັ່ງຄັດສຸດທ້າຍ: ເມື່ອອົງປະກອບທັງໝົດຢູ່ໃນສະຖານທີ່ແລ້ວ, ໃຫ້ຮັດເປັນລະບົບ bolts ແລະແກ່ນໝາກໄມ້ທັງໝົດຢ່າງເປັນລະບົບ. ກວດເບິ່ງທຸກໆການເຊື່ອມຕໍ່ເພື່ອຄວາມປອດໄພ.
- ການກວດສອບການທໍາງານ: Test all moving parts, including the multipress, weight stack, and pulley system, to ensure smooth operation.
ຮູບທີ 2: ມຸມ view of the R7 Nemesis, illustrating the structural frame and various attachment points for assembly reference.
4. ຄໍາແນະນໍາການດໍາເນີນງານ
The R7 Nemesis offers a variety of exercise options. Familiarize yourself with each component before beginning your workout.
4.1 Squat Rack and Free Weight Exercises
- J-Hooks: Insert the J-hooks into the desired height holes on the uprights. Ensure both hooks are at the same height and fully seated.
- Spotter Arms: For safety, always position the spotter arms below your lowest squat or bench press point. Insert them into the uprights and secure them.
- Barbell Placement: Carefully load your barbell onto the J-hooks.
4.2 Multipress (Smith Machine)
- Engaging the Bar: The multipress bar moves along guided rails. To unlock, rotate the bar slightly to disengage the safety catches.
- Safety Catches: Always re-engage the safety catches by rotating the bar back into the locked position when resting or finishing a set.
- ຈຸດຢຸດທີ່ສາມາດປັບໄດ້: Utilize the adjustable safety stops on the multipress rails to prevent the bar from descending too low.
4.3 Weight Stack and Pulley System
- ການເລືອກນ້ຳໜັກ: Insert the selector pin into the desired weight plate on the stack. Ensure the pin is fully inserted.
- ໄຟລ໌ແນບ: Connect various cable attachments (e.g., lat bar, rope handle) to the carabiner on the cable end.
- ການເຄື່ອນໄຫວກ້ຽງ: Perform exercises with controlled movements to prevent sudden jerks on the cables and pulleys.
4.4 ແຖບດຶງຂຶ້ນ
- The pull-up bar is offset forward, allowing for various grip positions. Ensure a secure grip before performing pull-ups.
4.5 Deadlift Station
- The deadlift station features safety straps. Position your barbell on these straps to absorb impact and reduce noise when lowering the weight.
ຮູບ 3: ດ້ານຫນ້າ view highlighting the weight stack, multipress bar, and J-hooks for various exercises.
ຮູບ 4: ຂ້າງ view demonstrating the pulley system, cable attachments, and the deadlift station with safety straps.
5. ບໍາລຸງຮັກສາ
Regular maintenance ensures the longevity and safe operation of your Atletica R7 Nemesis Stack Weight Rack.
- ທໍາຄວາມສະອາດປະຈໍາວັນ: ເຊັດອຸປະກອນທີ່ມີໂຄສະນາamp ຜ້າຫຼັງຈາກແຕ່ລະການນໍາໃຊ້ເພື່ອເອົາເຫື່ອແລະຝຸ່ນ. ຫຼີກລ້ຽງການເຮັດຄວາມສະອາດຂັດ.
- ການກວດກາປະຈຳອາທິດ: Check all bolts, nuts, and fasteners for tightness. Retighten as necessary.
- ການກວດສອບສາຍເຄເບີ້ນ ແລະ ລໍ້: Inspect cables for fraying, kinks, or wear. Ensure pulleys move freely and are not obstructed. Replace damaged cables immediately.
- ການລະບາຍສີ: Periodically apply a silicone-based lubricant to the multipress guide rods and any moving parts of the weight stack system to ensure smooth operation.
- ການປົກປ້ອງພື້ນ: Ensure the rubberized feet are intact and continue to protect your flooring.
6. ການແກ້ໄຂບັນຫາ
This section addresses common issues you might encounter with your R7 Nemesis Stack Weight Rack.
- ສຽງດັງ: Check for loose bolts and lubricate moving parts, especially the multipress guide rods and pulley axles.
- ການເຄື່ອນຍ້າຍສາຍເຄເບີ້ນຫຍາບ: Inspect cables for damage or improper routing. Ensure pulleys are clean and lubricated.
- Wobbling Rack: Verify that the rack is on a level surface. Check and tighten all frame bolts.
- Weight Stack Pin Sticking: Ensure the pin is not bent. Clean any debris from the weight plate holes and lubricate the pin if necessary.
If you encounter issues not listed here or if problems persist, please contact Atletica customer support for assistance.
7. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ຍີ່ຫໍ້ | Atletica |
| ໝາຍເລກຕົວແບບ | 555-2226 |
| ຄວາມສູງ | 223 ຊຕມ |
| ນ້ຳໜັກ | 344.5 ກິໂລ |
| ວັດສະດຸກອບ | 70mm Square Steel Tubes, 2.5mm Thickness |
| J-Hook Capacity | Up to 1100 kg per pair |
| Spotter Arm Capacity | Up to 350 kg per pair |
| Weight Stack | 125 ກິໂລ |
| ສີ | ດຳ |
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For detailed warranty information, please refer to the warranty card or documentation included with your Atletica R7 Nemesis Stack Weight Rack purchase. This document outlines the terms and conditions of your product's warranty.
For technical support, replacement parts, or any inquiries regarding your equipment, please contact Atletica customer service. Contact details can typically be found on the manufacturer's webເວັບໄຊ ຫຼືໃນເອກະສານການຊື້ຂອງທ່ານ.
