ແນະນຳ
Thank you for choosing the Vrabocry DC 5V/12V/24V 17 Key RF Wireless Remote LED Controller. This device is designed to provide versatile control over your 5050, 3528, and 5630 LED strip lights, offering a range of static colors and dynamic modes. Please read this manual carefully before installation and operation to ensure proper use and longevity of the product.
ຂໍ້ມູນຄວາມປອດໄພ
- ຮັບປະກັນການປ້ອນຂໍ້ມູນ voltage (5V, 12V, or 24V) matches your LED strip lights and power supply. Incorrect voltage can damage the controller and LED strips.
- Do not expose the controller or remote to moisture or extreme temperatures.
- ຕັດການເຊື່ອມຕໍ່ໄຟຟ້າກ່ອນທີ່ຈະເຮັດການເຊື່ອມຕໍ່ ຫຼື ຕັດການເຊື່ອມຕໍ່ໃດໆ.
- ຜະລິດຕະພັນນີ້ແມ່ນສໍາລັບການນໍາໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ.
- ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
ເນື້ອໃນຊຸດ
ຊຸດປະກອບມີລາຍການຕໍ່ໄປນີ້:
- 1 x RF Mini RGB Controller
- 1 x 17-Key RF Wireless Remote (CR2025 battery not included)
- 1 x ຄູ່ມືຜູ້ໃຊ້
ຕັ້ງຄ່າ
1. ການເຊື່ອມຕໍ່ຕົວຄວບຄຸມ
- Connect your LED strip light to the 4-pin output connector of the RF Mini RGB Controller. Ensure the polarity is correct (usually indicated by arrows or markings).
- Connect a compatible DC 5V/12V/24V power supply to the input jack of the RF Mini RGB Controller.
- ກວດສອບການເຊື່ອມຕໍ່ທັງຫມົດແມ່ນປອດໄພກ່ອນທີ່ຈະນໍາໃຊ້ໄຟ.
Image: The Vrabocry RF Mini RGB Controller connected to its 17-key wireless remote. The controller has a white cable with a 4-pin connector for LED strips and a power input jack.
2. ການຕິດຕັ້ງຫມໍ້ໄຟຄວບຄຸມໄລຍະໄກ
The 17-key RF Wireless Remote requires one CR2025 button battery (not included).
- Locate the battery tray on the back of the remote control.
- Gently push the small tab and pull out the battery tray.
- ໃສ່ແບັດ CR2025 ໃໝ່ ໂດຍໃຫ້ດ້ານບວກ (+) ຫັນໜ້າຂຶ້ນ.
- Slide the battery tray back into the remote until it clicks into place.
Image: The back of the 17-key RF Wireless Remote, illustrating the battery compartment for a CR2025 battery. Instructions for opening and inserting the battery are visible.
ຄໍາແນະນໍາການດໍາເນີນງານ
The 17-key RF Wireless Remote allows for comprehensive control of your LED strip lights. The remote operates using a 433MHz wireless signal, providing control without direct line-of-sight.
ຮູບພາບ: ທາງຫນ້າ view of the 17-key RF Wireless Remote Control, displaying all buttons and their labels for various functions.
ຟັງຊັນການຄວບຄຸມໄລຍະໄກ:
| ປຸ່ມ | ຟັງຊັນ |
|---|---|
| ON / STANDBY | Turns the LED lights on or switches to standby mode. |
| MODE+ / MODE- | Switches between 9 dynamic modes or transitions from static lighting to dynamic modes. |
| SPEED+ / SPEED- | Adjusts the speed of dynamic modes (5 levels). |
| BRIGHT+ / BRIGHT- | Adjusts the brightness of static colors or dynamic modes. |
| COLOR+ / COLOR- | Cycles through 20 static colors. Can also switch from dynamic mode to a static color. |
| SINGLE COLOR SELECT | Directly selects specific static colors: White, Red, Green, Blue, Yellow, Cyan, Pink. |
| DEMO | Activates a demonstration mode cycling through various dynamic effects. |
ໂໝດໄດນາມິກ:
The controller offers 9 dynamic modes, including effects such as strobe, breathing, fading in and out, slow flashing, and flickering. Use the MODE+ ແລະ ໂໝດ- buttons to cycle through these effects.
ສີຄົງທີ່:
There are 20 static colors available. Use the COLOR+ ແລະ COLOR- buttons to select your desired color, or use the dedicated single color buttons for quick access to primary colors.
ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: Use a soft, dry cloth to clean the controller and remote. Do not use liquid cleaners or solvents.
- ການປ່ຽນແບັດເຕີຣີ: Replace the CR2025 battery in the remote control when its range decreases or it stops responding. Refer to the "Remote Control Battery Installation" section for instructions.
- ການເກັບຮັກສາ: ເກັບຮັກສາອຸປະກອນໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ເມື່ອບໍ່ໄດ້ໃຊ້ເປັນເວລາດົນນານ.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| LED strip lights do not turn on. | No power to the controller. ການເຊື່ອມຕໍ່ບໍ່ຖືກຕ້ອງ. ແບັດເຕີຣີຣີໂໝດໝົດແລ້ວ. | ກວດເບິ່ງການເຊື່ອມຕໍ່ການສະຫນອງພະລັງງານ. Verify LED strip and power supply connections are secure and correct polarity. ປ່ຽນແບັດທາງໄກ. |
| ການຄວບຄຸມໄລຍະໄກບໍ່ຕອບສະຫນອງ. | ແບັດເຕີຣີຕາຍ ຫຼື ຕິດຕັ້ງບໍ່ຖືກຕ້ອງ. Remote is too far from the controller. | Replace CR2025 battery, ensuring correct polarity. Move closer to the controller. The RF signal has a typical range, but obstacles can reduce it. |
| LED colors are incorrect or flickering. | ການເຊື່ອມຕໍ່ວ່າງ. Incompatible LED strip type. | Check all 4-pin connections for the LED strip. Ensure your LED strip is a common anode RGB type compatible with this controller. |
ຂໍ້ມູນຈໍາເພາະ
- ສະບັບtage: 5V - 24V DC
- ປະຈຸບັນເຮັດວຽກ: 12A / 3 channels (4A per channel)
- ອຸນຫະພູມເຮັດວຽກ: -20°C ຫາ 60°C (-4°F ຫາ 140°F)
- ຂະໜາດຕົວຄວບຄຸມ: ປະມານ 1.6 x 0.5 x 0.2 ນິ້ວ (40 x 12.7 x 5 ມມ)
- ການຄວບຄຸມ RGB: 3 output channels, common anode+
- ສີຄົງທີ່: 20
- ໂໝດໄດນາມິກ: 9
- ລະດັບຄວາມໄວ: 5
- ວິທີການຄວບຄຸມ: 433MHz RF Wireless
- Remote Battery Type: CR2025 (ບໍ່ລວມ)
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Vrabocry products are designed for reliability and performance. For warranty information or technical support, please refer to the retailer where you purchased this product or visit the official Vrabocry webເວັບໄຊ. ກະລຸນາຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນ.
ຖ້າທ່ານພົບບັນຫາໃດໆທີ່ບໍ່ໄດ້ລະບຸໄວ້ໃນຄູ່ມືນີ້, ກະລຸນາຕິດຕໍ່ຝ່າຍສະໜັບສະໜູນລູກຄ້າເພື່ອຂໍຄວາມຊ່ວຍເຫຼືອ.
