eeTao PD18W+USBC AC/DC Adapter Charger User Manual

1. ບົດແນະນຳ

This manual provides essential instructions for the safe and efficient use of your eeTao PD18W+USBC AC/DC Adapter Charger. Please read this manual thoroughly before using the product and retain it for future reference. This adapter is designed to provide reliable power for compatible car jump starter battery packs.

2. ຜະລິດຕະພັນເກີນview

The eeTao PD18W+USBC AC/DC Adapter Charger is a versatile power supply designed for charging various portable devices, specifically compatible with HPBS H2000, H2500, H5000, 2000A, 4000A, and 5000A Car Jump Starter Battery Packs. It features both USB-A and USB-C outputs, supporting 5V, 9V, and 12V charging.

2.1 ເນື້ອໃນຊຸດ

• 1 x eeTao PD18W+USBC AC/DC Adapter Charger
• 1 x ສາຍສາກ USB-A ເຖິງ USB-C

2.2 ສ່ວນປະກອບຂອງຜະລິດຕະພັນ

ຮູບພາບ 2.2.1: ດ້ານໜ້າ view of the eeTao PD18W+USBC AC/DC Adapter Charger, showing the USB-A and USB-C output ports and voltage ratings (5V/9V/12V).

ຮູບພາບ 2.2.2: Included USB-A to USB-C charging cable, featuring a standard USB-A connector on one end and a USB-C connector on the other.

ຮູບພາບ 2.2.3: The eeTao power supply adapter shown alongside two compatible HPBS car jump starters (H2000 and H5000 models), illustrating its intended use. Note: Jump starters are not included with the adapter.

3. ຕັ້ງຄ່າ

Follow these steps to set up your eeTao AC/DC Adapter Charger:

1. ເຊື່ອມຕໍ່ຫາປລັກສຽບໄຟ: Plug the AC/DC adapter into a standard wall power outlet (100-240VAC, 50/60Hz). Ensure the outlet is easily accessible.
2. ເຊື່ອມຕໍ່ສາຍສາກໄຟ: Insert the USB-A end of the provided charging cable into the USB-A port on the adapter, or the USB-C end into the USB-C port on the adapter.
3. ເຊື່ອມຕໍ່ຫາອຸປະກອນ: Insert the other end of the charging cable (USB-C) into the charging port of your compatible HPBS Car Jump Starter Battery Pack.

The adapter is designed for worldwide input voltage, but ensure the local voltage ຢູ່ໃນຂອບເຂດທີ່ກໍານົດໄວ້.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

Once connected, the adapter will begin charging your compatible device. Observe the charging indicator on your jump starter (if available) to monitor the charging status.

4.1 ຂະບວນການສາກໄຟ

• Ensure all connections are secure before initiating charging.
• The adapter automatically detects the required voltage (5V, 9V, or 12V) for compatible devices.
• Charging time will vary depending on the capacity and current charge level of your jump starter battery pack.
• Disconnect the adapter from the power outlet and the device once charging is complete or when the device is not in use.

4.2 ຂໍ້ຄວນລະວັງຄວາມປອດໄພ

Your eeTao adapter is equipped with multiple safety features:

• OVP (Over Voltage Output Protection): ປ້ອງກັນຜົນຜະລິດຫຼາຍເກີນໄປ voltage.
• OCP (Over Current Output Protection): ປ້ອງກັນກະແສໄຟຟ້າຫຼາຍເກີນໄປ.
• SCP (Short Circuit Output Protection): ປ້ອງກັນຄວາມເສຍຫາຍຈາກວົງຈອນສັ້ນ.

Always use the adapter in a well-ventilated area and avoid covering it during operation. Do not expose the adapter to water, moisture, or extreme temperatures.

5. ບໍາລຸງຮັກສາ

ການບຳລຸງຮັກສາທີ່ເໝາະສົມຮັບປະກັນອາຍຸການໃຊ້ງານທີ່ຍາວນານ ແລະ ປະສິດທິພາບທີ່ດີທີ່ສຸດຂອງອະແດບເຕີຂອງທ່ານ.

• ທໍາຄວາມສະອາດ: ຖອດອະແດບເຕີອອກຈາກແຫຼ່ງພະລັງງານທັງໝົດກ່ອນທຳຄວາມສະອາດ. ໃຊ້ຜ້າອ່ອນໆແຫ້ງເຊັດພື້ນຜິວ. ຢ່າໃຊ້ນ້ຳຢາທຳຄວາມສະອາດ ຫຼື ຕົວລະລາຍ.
• ການເກັບຮັກສາ: ເກັບຮັກສາອະແດບເຕີໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະອຸນຫະພູມທີ່ຮຸນແຮງເມື່ອບໍ່ໄດ້ໃຊ້.
• ການດູແລສາຍໄຟ: Avoid bending or crimping the charging cable excessively. Do not pull the cable to disconnect; always grasp the plug.

6. ການແກ້ໄຂບັນຫາ

If you encounter issues with your adapter, refer to the following common troubleshooting steps:

• ອຸປະກອນບໍ່ໄດ້ສາກໄຟ:
  • ໃຫ້ແນ່ໃຈວ່າອະແດບເຕີໄດ້ຖືກສຽບເຂົ້າກັບປລັກສຽບຝາທີ່ໃຊ້ງານໄດ້ຢ່າງປອດໄພແລ້ວ.
  • Verify that the charging cable is firmly connected to both the adapter and the jump starter.
  • ລອງໃຊ້ປລັກສຽບຝາຜະໜັງແບບອື່ນ.
  • Inspect the charging cable for any visible damage. Replace if necessary.
  • ໝາຍເຫດສຳຄັນ: Rechargeable batteries have a limited lifespan (typically 1 to 3 years). If the jump starter's internal battery is damaged or has reached the end of its life, it may not accept a charge. This is a characteristic of the battery itself and not an issue with the charger.
• ການສາກໄຟຊ້າ:
  • Ensure you are using the provided cable or a high-quality, compatible charging cable.
  • Verify that the jump starter is not being used simultaneously for other functions that draw power.
• Adapter is Hot:
  • It is normal for the adapter to become warm during operation. If it becomes excessively hot, disconnect it immediately and allow it to cool. Ensure it is in a well-ventilated area.

If problems persist after following these steps, please contact eeTao customer support.

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

eeTao stands behind the quality of its products.

• ນະໂຍບາຍການຄືນເງິນ: 30 days refund period from the date of purchase.
• ນະໂຍບາຍການແລກປ່ຽນ: 24 months exchange period for defective units from the date of purchase.

For warranty claims, technical support, or any inquiries, please contact eeTao customer service through the retailer where the product was purchased or visit the official eeTao store page on Amazon: eeTao Store.