ຄູ່ມືຜູ້ໃຊ້ຊຸດເຄື່ອງບົດມຸມ Weytoll 12V ໄຮ້ສາຍ

ແນະນຳ

This manual provides essential instructions for the safe operation, maintenance, and troubleshooting of your Weytoll 12V Cordless Brush Angle Grinder Kit, Model CG1374. Please read this manual thoroughly before using the tool to ensure proper function and to prevent injury.

ເນື້ອໃນຊຸດ

Figure 1: Complete Weytoll Angle Grinder Kit Contents

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ທີ່​ລະ​ບຸ​ໄວ້​ຂ້າງ​ລຸ່ມ​ນີ້​ແມ່ນ​ມີ​ຢູ່​ໃນ​ຊຸດ​ຂອງ​ທ່ານ​:

• ເຄື່ອງບົດມຸມໄຮ້ສາຍ 1 x
• 2 x 12V 1300mAh Lithium-Ion Battery
• 1 x Battery Charger (110-240V 50/60Hz input, 12.6V 2.0A output)
• 1 x Pair of Gloves (optional, depending on kit version)
• 6 x Saw Blades (or 2 x Metal Cutting Wheels, depending on kit version)
• 1 x ປະແຈ
• 1 x ຄູ່ມືຜູ້ໃຊ້ (ພາສາອັງກິດ)

ຄໍາແນະນໍາຄວາມປອດໄພ

ປະຕິບັດຕາມຄວາມລະມັດລະວັງດ້ານຄວາມປອດໄພຂັ້ນພື້ນຖານສະເໝີເພື່ອຫຼຸດຜ່ອນຄວາມສ່ຽງຕໍ່ການເກີດອັກຄີໄພ, ໄຟຊັອດ, ແລະການບາດເຈັບສ່ວນບຸກຄົນເມື່ອໃຊ້ເຄື່ອງມືໄຟຟ້ານີ້.

ຄຳເຕືອນຄວາມປອດໄພຂອງເຄື່ອງມືໄຟຟ້າທົ່ວໄປ

• ຄວາມປອດໄພໃນພື້ນທີ່ເຮັດວຽກ: ຮັກສາພື້ນທີ່ບ່ອນເຮັດວຽກຂອງເຈົ້າໃຫ້ສະອາດ ແລະ ມີແສງສະຫວ່າງດີ. ພື້ນທີ່ວຸ້ນວາຍ ຫຼືບ່ອນມືດພາໃຫ້ເກີດອຸປະຕິເຫດ. ຫ້າມໃຊ້ເຄື່ອງມືໄຟຟ້າໃນບັນຍາກາດທີ່ລະເບີດ, ເຊັ່ນໃນທີ່ປະທັບຂອງຂອງແຫຼວ, ອາຍແກັສ, ຫຼືຝຸ່ນ.
• ຄວາມປອດໄພທາງໄຟຟ້າ: ປລັກເຄື່ອງມືໄຟຟ້າຕ້ອງກົງກັບປລັກສຽບໄຟ. ບໍ່ເຄີຍດັດແປງປລັກສຽບໃນທາງໃດກໍ່ຕາມ. ຢ່າໃຊ້ສາຍບື. ຮັກສາສາຍໄຟໃຫ້ຫ່າງຈາກຄວາມຮ້ອນ, ນໍ້າມັນ, ແຄມແຫຼມ, ຫຼືພາກສ່ວນທີ່ເຄື່ອນຍ້າຍ.
• ຄວາມປອດໄພສ່ວນຕົວ: Always wear eye protection (safety goggles), hearing protection, and a dust mask when operating the grinder. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• ການ​ນໍາ​ໃຊ້​ແລະ​ການ​ດູ​ແລ​ເຄື່ອງ​ມື​: ຢ່າບັງຄັບເຄື່ອງມືພະລັງງານ. ໃຊ້ເຄື່ອງມືພະລັງງານທີ່ຖືກຕ້ອງສໍາລັບຄໍາຮ້ອງສະຫມັກຂອງທ່ານ. ຖອດຊຸດແບັດເຕີລີ່ອອກຈາກເຄື່ອງມືໄຟຟ້າກ່ອນທີ່ຈະເຮັດການປັບປ່ຽນ, ປ່ຽນອຸປະກອນເສີມ, ຫຼືເກັບຮັກສາເຄື່ອງມືພະລັງງານ.
• ການ​ນໍາ​ໃຊ້​ແລະ​ການ​ດູ​ແລ​ເຄື່ອງ​ມື​ຫມໍ້​ໄຟ​: ເຕີມເງິນດ້ວຍເຄື່ອງສາກທີ່ລະບຸໂດຍຜູ້ຜະລິດເທົ່ານັ້ນ. ໃຊ້ເຄື່ອງມືພະລັງງານກັບຊຸດຫມໍ້ໄຟທີ່ກໍານົດໂດຍສະເພາະ.

ສິນຄ້າເກີນview

Familiarize yourself with the components of your angle grinder before operation.

Figure 2: Angle Grinder Components

1. ປຸ່ມລັອກ spindle
2. Disc Guard
3. Spindle
4. ປຸ່ມເປີດ/ປິດ
5. ປຸ່ມປົດປ່ອຍແບັດເຕີຣີ
6. ຊຸດຫມໍ້ໄຟ
7. ສະລັອດຕິງລະບາຍອາກາດ

ຕັ້ງຄ່າ

1. ສາກແບັດເຕີຣີ

Before first use, fully charge the battery packs. Ensure the charger is connected to a standard power outlet (110-240V AC). Insert the battery pack into the charger. The indicator light on the charger will show the charging status (e.g., red for charging, green for fully charged). Charging time may vary.

2. Disc Installation

Always ensure the battery is removed from the grinder before installing or changing discs.

1. ກົດປຸ່ມລັອກ spindle ຄ້າງໄວ້.
2. ວາງ flange ພາຍໃນໃສ່ spindle ໄດ້.
3. Position the desired cutting or grinding disc onto the spindle, ensuring it sits flush against the inner flange.
4. Thread the outer flange (nut) onto the spindle and tighten it firmly using the provided wrench.
5. ປ່ອຍປຸ່ມລັອກ spindle.

Figure 3: Disc Installation Process

Ensure the disc guard is properly positioned to protect against sparks and debris.

ຄໍາແນະນໍາການດໍາເນີນງານ

1. ເປີດ / ປິດພະລັງງານ

• ເພື່ອເປີດ: Insert a charged battery pack. Slide the On/Off switch forward to the "ON" position.
• ປິດ: Slide the On/Off switch backward to the "OFF" position.

2. ຂໍ້ແນະນຳການນຳໃຊ້

Always hold the grinder firmly with both hands during operation. Allow the disc to reach full speed before contacting the workpiece. Apply light, consistent pressure. Do not force the tool, as this can lead to kickback or damage to the tool and disc.

Figure 4: Angle Grinder in Operation

• ການຕັດ: Use a cutting disc. Position the workpiece securely. Make shallow passes, allowing the disc to do the work.
• ການບີບ: Use a grinding disc. Maintain a slight angle (15-30 degrees) between the disc and the workpiece. Move the grinder smoothly across the surface.
• Polishing/Sanding: Use appropriate sanding or polishing attachments. Apply minimal pressure and move the tool continuously to avoid overheating the surface.

ບໍາລຸງຮັກສາ

1. ການທໍາຄວາມສະອາດແລະການເກັບຮັກສາ

• After each use, disconnect the battery and clean the tool with a dry cloth. Remove any dust or debris from the ventilation slots to prevent overheating.
• Store the angle grinder and accessories in a dry, secure place, out of reach of children.

2. ການດູແລຫມໍ້ໄຟ

• Do not store batteries in direct sunlight or in areas with high temperatures.
• ສຳລັບການເກັບຮັກສາໃນໄລຍະຍາວ, ສາກແບັດເຕີຣີໃຫ້ມີຄວາມຈຸປະມານ 50%.
• Avoid fully discharging the battery packs, as this can reduce their lifespan.

ການແກ້ໄຂບັນຫາ

ເບິ່ງຕາຕະລາງຂ້າງລຸ່ມນີ້ສໍາລັບບັນຫາທົ່ວໄປແລະການແກ້ໄຂທີ່ເປັນໄປໄດ້ຂອງພວກເຂົາ.

ຂໍ້ມູນຈໍາເພາະ

Technical specifications for the Weytoll 12V Cordless Brush Angle Grinder Kit.

ຮູບທີ 5: ຂະໜາດຜະລິດຕະພັນ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ຂໍ້ມູນການຮັບປະກັນ

Weytoll products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or contact customer support. Keep your purchase receipt as proof of purchase for warranty claims.

ການຊ່ວຍເຫຼືອລູກຄ້າ

If you encounter any issues or have questions regarding your Weytoll 12V Cordless Brush Angle Grinder Kit, please contact our customer support team. Contact information can typically be found on the product packaging or the official Weytoll website. When contacting support, please have your product model (CG1374) and purchase details ready.