ເຄື່ອງສະຕາດ GOOLOO GP3000/A3 3000A ພ້ອມຄູ່ມືການນຳໃຊ້ເຄື່ອງອັດອາກາດ 150PSI

1. ຜະລິດຕະພັນເກີນview

The GOOLOO GP3000/A3 is a versatile 5-in-1 device combining a powerful 3000A peak current jump starter, a 150PSI air compressor, a portable power bank, an LED flashlight, and an SOS emergency light. It is designed to provide reliable assistance for various vehicles and devices.

Figure 1: GOOLOO GP3000/A3 Jump Starter and Air Compressor unit with accessories.

2. ການຕິດຕັ້ງແລະການສາກໄຟ

2.1 ການສາກໄຟ ໜ່ວຍ

Before first use, fully charge the GP3000/A3 unit. Use the provided USB-C cable and a compatible charger (not included) to charge the device. The battery level indicator on the screen will show charging progress.

2.2 ການເຊື່ອມຕໍ່ສາຍ Jumper

1. Open the protective cap on the jump starter port.
2. Insert the blue end of the smart jumper cable into the jump starter port on the GP3000/A3 unit. Ensure a secure connection.
3. The smart jumper cable features built-in safety protections against over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, over-voltage, over-load, spark-proof, ແລະ reverse-charge.

2.3 Connecting Air Compressor Hose

1. Locate the air compressor hose port on the unit.
2. Screw the air compressor hose securely into the port.
3. Attach the appropriate nozzle from the accessory kit for the item you wish to inflate.

3. ຄໍາແນະນໍາການດໍາເນີນງານ

3.1 ໂດດເລີ່ມຕົ້ນຍານພາຫະນະ

1. Ensure the GP3000/A3 unit is sufficiently charged.
2. ເຊື່ອມຕໍ່ cl ສີແດງamp ໄປທີ່ຈຸດບວກ (+) ຂອງຫມໍ້ໄຟລົດ.
3. ເຊື່ອມຕໍ່ສີດໍາ clamp ໄປທີ່ຈຸດລົບ (-) ຂອງຫມໍ້ໄຟຂອງຍານພາຫະນະ.
4. Check the smart jumper cable indicator light. A solid green light indicates a correct connection and the unit is ready. If the light is red or flashing, check connections for reverse polarity or other issues.
5. If the vehicle battery is completely dead or voltage is too low to detect, press the "BOOST" button on the smart jumper cable. The indicator light will turn solid green, providing maximum power for 30 seconds.
6. Start the vehicle. Once the vehicle starts, immediately remove the clamps ຈາກ terminals ຫມໍ້ໄຟ.

Figure 2: Jump starter connected to a vehicle battery for emergency starting.

3.2 ອັດຕາເງິນເຟີ້ຢາງລົດ

1. Connect the air compressor hose to the tire valve.
2. Turn on the GP3000/A3 unit. The screen will display the current tire pressure.
3. Use the mode button to select the appropriate inflation mode (SUV, car, bike, ball, or customizable).
4. Use the +/- buttons to set the desired pressure (PSI, BAR, or KPA).
5. Press the start button to begin inflation. The compressor will automatically shut off once the preset pressure is reached.

Figure 3: The unit inflating a vehicle tire, displaying current and target pressure.

3.3 ການທໍາງານຂອງ Power Bank

The GP3000/A3 features USB-A and USB-C output ports to charge smartphones, tablets, and other USB-powered devices. Simply connect your device using a compatible USB cable.

Figure 4: The jump starter unit charging various electronic devices.

3.4 LED Flashlight and SOS Light

Press and hold the power button for 3 seconds to turn on the LED flashlight. Press the power button again to cycle through different modes: solid light, strobe, and SOS signal. Press and hold again to turn off.

Figure 5: Demonstrating the normal, strobe, and SOS modes of the integrated LED flashlight.

4. ຂໍ້ມູນຄວາມປອດໄພ

The GP3000/A3 is equipped with 10 smart safety protections, including over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, over-voltage, over-load, spark-proof, and reverse-charge protection. Always follow these guidelines for safe operation:

• ຫ້າມ​ນຳ​ໜ່ວຍ​ດັ່ງກ່າວ​ລົງ​ໃນ​ນ້ຳ.
• ຢ່າ disassemble ຫນ່ວຍງານ.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
• Use only the provided smart jumper cables.
• Do not jump start a vehicle with a severely damaged or frozen battery.

Figure 6: Smart jumper cable highlighting the 10 built-in safety protections.

5. ການ ບຳ ລຸງຮັກສາແລະການເກັບຮັກສາ

The GP3000/A3 is designed for durability with over 1000+ charge cycles. To ensure longevity and optimal performance:

• ສາກໜ່ວຍທຸກໆ 3-6 ເດືອນ, ເຖິງແມ່ນວ່າບໍ່ໄດ້ໃຊ້, ເພື່ອຮັກສາສຸຂະພາບຂອງແບັດເຕີຣີ.
• Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. The operating temperature range is -4°F to 140°F (-20°C to 60°C).
• ເຊັດເຄື່ອງດ້ວຍຜ້າແຫ້ງ ແລະ ນຸ່ມ. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງ ຫຼື ວັດສະດຸຂັດ.

6. ການແກ້ໄຂບັນຫາ

• ໜ່ວຍ​ງານ​ບໍ່​ເປີດ: ໃຫ້ແນ່ໃຈວ່າເຄື່ອງໄດ້ສາກໄຟແລ້ວ. ກົດປຸ່ມເປີດປິດຄ້າງໄວ້ສອງສາມວິນາທີ.
• Jumper cable indicator light is red/flashing: Check for reverse polarity (red clamp on negative, black on positive) and correct the connection. If the battery is extremely low, use the BOOST function.
• ເຄື່ອງອັດອາກາດບໍ່ພອງຕົວ: Ensure the hose is securely attached and the desired pressure is set. Check for leaks in the hose or tire valve.
• Unit overheating: The device has built-in overheat protection. If it becomes too hot, it will temporarily shut down. Allow it to cool down before resuming use.

7. ຂໍ້ມູນຈໍາເພາະ

• ສູງສຸດ Cranking Ampອາຍຸ: 3000 Amps
• ຫມໍ້ໄຟ Voltage: 12 ໂວນ
• ອົງປະກອບຂອງຈຸລັງຫມໍ້ໄຟ: ລີໂທມໂພລີເມີ
• Max Engine Compatibility: ສູງສຸດ 9.0 ລິດ ນໍ້າມັນແອັດຊັງ, 6.5 ລິດ ນໍ້າມັນກາຊວນ
• Max Tire Inflator Pressure: 150 PSI
• ການໄຫຼທາງອາກາດ: 35 ລິດ/ນາທີ
• ອຸນຫະພູມປະຕິບັດການ: -4°F ຫາ 140°F (-20°C ຫາ 60°C)
• USB Output: USB-A (5V/3A), USB-C (5V/3A, 9V/2A, 12V/1.5A)
• ຄວາມອາດສາມາດຫມໍ້ໄຟ: 44.4 ວ

8. ວິດີໂອຜະລິດຕະພັນຢ່າງເປັນທາງການ

Watch this official video from GOOLOO for a demonstration on how to jump start a car using a similar model.

Video 1: How to Jump Start a Car Using GOOLOO GT6000 (similar to GP3000/A3).

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, or further inquiries, please refer to the official GOOLOO website or contact GOOLOO customer service directly. You can also visit the GOOLOO Store on Amazon.