ຄູ່ມືຜູ້ໃຊ້ທີ່ວາງໂທລະສັບແມ່ເຫຼັກ Baseus PrimeTrip C02 Go

1. ບົດແນະນຳ

The Baseus PrimeTrip C02 Go Magnetic Phone Holder is designed to securely mount your smartphone in your vehicle. It features a powerful magnetic attraction and an upgraded 3M adhesive for stable installation on various flat surfaces within your car. This manual provides instructions for proper installation, operation, and maintenance of your device.

ຮູບພາບ 1.1: ຫຼາຍກວ່າview of the Baseus PrimeTrip C02 Go Magnetic Phone Holder. The holder is black with a sleek, curved design, featuring a circular magnetic head and a base with a textured surface for dashboard placement.

2. ເນື້ອໃນຊຸດ

ກະ​ລຸ​ນາ​ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ທີ່​ລະ​ບຸ​ໄວ້​ຂ້າງ​ລຸ່ມ​ນີ້​ແມ່ນ​ລວມ​ຢູ່​ໃນ​ຊຸດ​ຂອງ​ທ່ານ​:

• 1 x Baseus C02 Car Mount
• 2 x 3M Adhesive Tapes (one pre-applied, one spare)
• 1 x Metal Ring (for non-MagSafe compatible phones)
• 1 x Metal Sticker (for attaching the metal ring)
• 1 x Alcohol Pad (for surface preparation)
• 1 x ຄູ່ມືຜູ້ໃຊ້

3. ຂໍ້ມູນຄວາມປອດໄພ

• Ensure the phone holder is securely mounted and does not obstruct your view of the road or interfere with vehicle controls (e.g., airbags, dashboard indicators).
• Do not install the holder in a location that could become a projectile hazard in the event of an accident.
• Avoid adjusting the holder or your phone while driving. Make all adjustments before starting your journey.
• Keep the magnetic holder away from sensitive electronic devices that may be affected by magnetic fields.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Follow these steps for optimal installation of your Baseus PrimeTrip C02 Go Magnetic Phone Holder:

1. ເລືອກສະຖານທີ່ຕິດຕັ້ງ: Select a flat, clean surface on your dashboard, center console, or windshield. Ensure the chosen location does not obstruct your driving view ຫຼືການຄວບຄຸມຍານພາຫະນະ.
2. ອະນາໄມພື້ນຜິວ: Use the provided alcohol pad to thoroughly clean the chosen mounting surface. Allow it to dry completely before proceeding.
3. ສະຫມັກຜູ້ຖື: Peel off the protective film from the 3M adhesive tape on the base of the holder. Firmly press the holder onto the cleaned surface for at least 30 seconds.
4. Allow Adhesion: For maximum adhesion, allow the 3M adhesive to cure for 24 hours before attaching your phone.
5. ສຳລັບໂທລະສັບທີ່ບໍ່ແມ່ນ MagSafe: If your phone or phone case is not MagSafe compatible, attach the included metal ring to the back of your phone or phone case using the metal sticker. Ensure it is centered for optimal magnetic connection.

Image 4.1: The phone holder securely installed on a car dashboard, demonstrating its stable placement and the strong 3M VHB tape adhesion, capable of holding up to 1.8kg.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

Once installed, operating your phone holder is straightforward:

1. ການ​ຕິດ​ຕັ້ງ​ໂທລະ​ສັບ​ຂອງ​ທ່ານ​: Simply bring your MagSafe-compatible phone (or phone with the metal ring attached) close to the magnetic head of the holder. The powerful magnets will securely snap your phone into place.
2. ປັບ Viewໃນມຸມ: The holder features a 360° rotatable magnetic head, allowing you to switch between portrait and landscape modes. The arm also allows for 180° up and down adjustment to achieve your desired viewມຸມ ing.
3. ການຖອດໂທລະສັບຂອງທ່ານອອກ: ຄ່ອຍໆດຶງໂທລະສັບຂອງທ່ານອອກຈາກຫົວແມ່ເຫຼັກເພື່ອຖອດມັນອອກ.

Image 5.1: The phone holder demonstrating its 360-degree rotation capability, allowing the phone to be positioned in both landscape and portrait orientations for optimal viewing.

Image 5.2: An illustration showing the powerful magnetic attraction of the holder, capable of securely holding a smartphone even on bumpy roads with up to 18N of force.

6. ຄວາມເຂົ້າກັນໄດ້

The Baseus PrimeTrip C02 Go Magnetic Phone Holder offers wide compatibility:

• ອຸປະກອນທີ່ເຂົ້າກັນໄດ້ກັບ MagSafe: Directly compatible with iPhone 15/14/13/12 Pro Plus Max Mini series and other MagSafe-enabled devices or cases.
• Universal Smartphone Compatibility: For all other smartphones, including Samsung, Huawei, Xiaomi, Redmi, HTC, Blackberry, Google Pixel, Sony, LG, OnePlus, Motorola, ZTE, etc., use the included metal ring for magnetic attraction.
• ຄວາມເຂົ້າກັນໄດ້ຂອງຍານພາຫະນະ: Applicable to all cars, installable on any flat surface such as the dashboard, center console, or windshield.

Image 6.1: The phone holder positioned in front of various car models, illustrating its wide compatibility and suitability for installation in any vehicle.

7. ບໍາລຸງຮັກສາ

ເພື່ອຮັບປະກັນອາຍຸການໃຊ້ງານທີ່ຍາວນານ ແລະ ປະສິດທິພາບທີ່ດີທີ່ສຸດຂອງທີ່ຖືໂທລະສັບຂອງທ່ານ:

• Clean the holder regularly with a soft, dry cloth to remove dust and debris.
• Avoid using harsh chemicals or abrasive cleaners, as these can damage the material.
• If the adhesive needs to be replaced, use the spare 3M adhesive tape provided in the package. Ensure the surface is clean and dry before applying new adhesive.

8. ການແກ້ໄຂບັນຫາ

• Issue: Phone not holding securely.
  ການແກ້ໄຂ: Ensure your phone is MagSafe compatible or has the metal ring properly attached and centered. Check for any obstructions between the phone and the holder.
• Issue: Adhesive not sticking.
  ການແກ້ໄຂ: Ensure the mounting surface was thoroughly cleaned with the alcohol pad and completely dry before application. Press firmly for at least 30 seconds and allow 24 hours for the adhesive to cure. If issues persist, use the spare 3M adhesive tape.
• Issue: Holder feels loose.
  ການແກ້ໄຂ: Re-check the adhesive bond. If necessary, remove the holder, clean the surface, and reapply with a new 3M adhesive tape.

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information or technical support, please refer to the warranty card included with your product or visit the official Baseus website. You may also contact Baseus customer service directly for assistance.