ຄູ່ມືການນຳໃຊ້ຊຸດເຄື່ອງສົ່ງສັນຍານໄຮ້ສາຍ Lixada DMX512 2.4G

1. ບົດແນະນຳ

This manual provides detailed instructions for the setup, operation, and maintenance of your Lixada DMX512 2.4G Wireless Transmitter Receiver Kit. This kit is designed to provide wireless DMX signal transmission for various lighting fixtures, eliminating the need for extensive cabling in stage, club, or event setups.

ເນື້ອໃນຊຸດ

ກະ​ລຸ​ນາ​ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ທີ່​ລະ​ບຸ​ໄວ້​ຂ້າງ​ລຸ່ມ​ນີ້​ແມ່ນ​ລວມ​ຢູ່​ໃນ​ຊຸດ​ຂອງ​ທ່ານ​:

• 1 x DMX Transmitter
• 7 x DMX Receivers
• 8 x ຕົວແປງໄຟ
• 1 x ຄູ່ມືແນະນຳ (ເອກະສານນີ້)

ຮູບທີ 1.1: ເກີນview of the Lixada DMX512 Wireless Transmitter Receiver Kit, showing one transmitter with an antenna and seven compact receivers.

2. ຂໍ້ມູນຄວາມປອດໄພ

ເພື່ອຮັບປະກັນການເຮັດວຽກທີ່ປອດໄພ ແລະ ຍືດອາຍຸການໃຊ້ງານຂອງອຸປະກອນຂອງທ່ານ, ກະລຸນາປະຕິບັດຕາມຂໍ້ຄວນລະວັງດ້ານຄວາມປອດໄພຕໍ່ໄປນີ້:

• ການສະຫນອງພະລັງງານ: Use only the provided power adapters. Ensure the input voltage matches the device's requirements (DC 5V 500mA min).
• ສະພາບແວດລ້ອມ: Do not expose the devices to rain, moisture, extreme temperatures, or corrosive liquids. Operate in a dry, well-ventilated area.
• ການຈັດການ: Avoid dropping or subjecting the devices to severe impact. Do not attempt to open or modify the units, as this will void the warranty and may cause damage or injury.
• ແຊກແຊງ: While designed for interference-free communication, keep the devices away from strong electromagnetic fields or other 2.4G wireless devices that may cause signal disruption.
• ການຈັດວາງ: Ensure the antenna on the transmitter is positioned for optimal signal transmission, ideally with a clear line of sight to receivers.

3. ຜະລິດຕະພັນເກີນview ແລະອົງປະກອບ

The Lixada DMX512 Wireless Kit consists of one transmitter and multiple receivers, designed for robust and reliable DMX signal transmission.

ຄຸນສົມບັດເຄື່ອງສົ່ງສັນຍານ

ຮູບທີ 3.1: ລະອຽດ view of the DMX512 Transmitter, highlighting its rotatable antenna, indicator lamp, 3-pin XLR male port, and power input interface.

• Rotatable Antenna: Allows for adjustment to optimize signal direction and range.
• ຕົວຊີ້ວັດ Lamp: Provides visual feedback on power status and DMX signal transmission.
• 3-pin XLR Male Port: Connects to your DMX controller or other DMX signal source.
• ການໂຕ້ຕອບການປ້ອນຂໍ້ມູນພະລັງງານ: For connecting the DC 5V power adapter.

ຄຸນນະສົມບັດຜູ້ຮັບ

ຮູບທີ 3.2: Close-up of a DMX512 Receiver, showing its compact design and power input. The white cap indicates the DMX signal indicator.

• ການອອກແບບກະທັດຮັດ: Small form factor for easy integration into lighting setups.
• ຕົວຊີ້ວັດ Lamp (White Cap): Indicates power and DMX signal reception.
• 3-pin XLR Female Port: Connects directly to DMX-compatible lighting fixtures.
• ການໂຕ້ຕອບການປ້ອນຂໍ້ມູນພະລັງງານ: For connecting the DC 5V power adapter.

ຂະໜາດ

ຮູບທີ 3.3: Dimensions of the DMX512 Transmitter (12cm / 4.72in length, 8.8cm / 3.46in antenna length) and Receiver (8cm / 3.14in length).

4. ຄໍາແນະນໍາການຕິດຕັ້ງ

Follow these steps to set up your Lixada DMX512 Wireless Kit:

1. ເຊື່ອມຕໍ່ເຄື່ອງສົ່ງສັນຍານ:
   • Connect one of the provided power adapters to the power input interface of the DMX Transmitter.
   • Plug the 3-pin XLR male port of the transmitter into the DMX output of your DMX controller or console.
   • Ensure the antenna is securely attached and positioned vertically or adjusted for optimal line of sight.
2. ເຊື່ອມຕໍ່ເຄື່ອງຮັບ:
   • For each DMX-compatible lighting fixture you wish to control wirelessly, connect one DMX Receiver.
   • Plug the 3-pin XLR female port of the receiver directly into the DMX input of your lighting fixture.
   • Connect a power adapter to the power input interface of each receiver.
3. ເປີດ:
   • Plug all power adapters into appropriate power outlets.
   • ຕົວຊີ້ບອກ lamps on both the transmitter and receivers should illuminate, indicating power.

ຮູບທີ 4.1: Illustration of the wireless DMX signal flow from a DMX controller (via transmitter) to multiple lighting fixtures (via receivers).

5. ຄໍາແນະນໍາການດໍາເນີນງານ

The Lixada DMX512 Wireless Kit operates on a plug-and-play principle, automatically establishing a wireless DMX connection.

1. ການຈັບຄູ່ອັດຕະໂນມັດ:
   • Once the transmitter and receivers are powered on and the transmitter is receiving a DMX signal, they will automatically search for and pair with each other.
   • ຕົວຊີ້ບອກ lamps on both units will typically show a specific pattern (e.g., solid light or slow blink) to confirm a successful connection and DMX signal transmission/reception. Refer to the indicator lamp section for specific status meanings (if available, otherwise general).
2. DMX Signal Transmission:
   • The transmitter converts the wired DMX512 signal into a 2.4G wireless signal.
   • Receivers pick up this wireless signal and convert it back into a wired DMX512 signal for your lighting fixtures.
   • The system utilizes a 2.4G ISM 126-channel frequency section to minimize interference and ensure stable communication.
3. ໄຟຄວບຄຸມ:
   • Once connected, operate your DMX controller as usual. The wireless system acts as a transparent bridge for the DMX signal.
   • Ensure your lighting fixtures are set to the correct DMX addresses as configured on your DMX controller.

ຮູບທີ 5.1: Example setup showing the DMX wireless system integrated with a professional DJ console for controlling stage ແສງ.

6. ຂໍ້ມູນຈໍາເພາະ

7. ການແກ້ໄຂບັນຫາ

If you encounter issues with your Lixada DMX512 Wireless Kit, refer to the following common problems and solutions:

• No DMX Signal / Lights Not Responding:
  • ກວດສອບພະລັງງານ: Ensure both the transmitter and all receivers are properly powered on and their indicator lamps ແມ່ນ lit.
  • Check DMX Connections: Verify that the transmitter is correctly connected to the DMX output of your controller and receivers are correctly connected to the DMX input of your fixtures.
  • ຕົວຊີ້ວັດສັນຍານ: Observe the indicator lamps. If they are not showing a stable connection (e.g., rapidly blinking or off), there might be a pairing issue or signal loss.
  • ທີ່ຢູ່ DMX: Confirm that your lighting fixtures are set to the correct DMX addresses as configured on your DMX controller.
  • Wired Test: Temporarily connect a lighting fixture directly to your DMX controller with a wired DMX cable to confirm the controller and fixture are functioning correctly.
• Intermittent Signal / Lag:
  • Line of Sight: Ensure there is a clear line of sight between the transmitter and receivers. Obstructions (walls, large metal objects, crowds) can degrade signal quality.
  • ໄລຍະທາງ: While rated for 400m, actual range can vary. Reduce the distance between units if experiencing issues.
  • ແຊກແຊງ: The 2.4G band is shared with Wi-Fi, Bluetooth, and other wireless devices. Try to relocate the units away from other strong 2.4G transmitters. The 126-channel frequency hopping helps mitigate this, but extreme interference can still occur.
  • ຕຳແໜ່ງເສົາອາກາດ: Adjust the transmitter's rotatable antenna for optimal reception.
• ອຸປະກອນບໍ່ເປີດ:
  • Power Adapter: Ensure the power adapter is securely connected to both the device and a working power outlet. Test the outlet with another device.
  • Adapter Functionality: If possible, test the power adapter with another compatible device or try a different adapter (ensuring correct voltage ແລະປະຈຸບັນ).

8. ບໍາລຸງຮັກສາ

Proper maintenance ensures the longevity and reliable performance of your Lixada DMX512 Wireless Kit:

• ທໍາຄວາມສະອາດ: Use a soft, dry cloth to clean the exterior of the devices. Do not use abrasive cleaners, solvents, or excessive moisture.
• ການເກັບຮັກສາ: When not in use, store the devices in a cool, dry place, away from direct sunlight and extreme temperatures. Keep them in their original packaging or a protective case to prevent physical damage.
• ການດູແລສາຍໄຟ: Regularly inspect power adapters and DMX cables for any signs of wear, cuts, or damage. Replace damaged cables immediately.
• ເສົາອາກາດ: Handle the transmitter's antenna carefully to avoid bending or breaking it.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Warranty information for your Lixada DMX512 Wireless Transmitter Receiver Kit is typically provided at the point of purchase or within the product packaging. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact your retailer or the official Lixada customer support channels. Refer to the Lixada brand store on Amazon for potential support contact information: Lixada Store.