ຄູ່ມືຜູ້ໃຊ້ເຄື່ອງດູດຝຸ່ນລົດໄຮ້ສາຍ Baseus AP01 ແບບພົກພາ

1. ບົດແນະນຳ

Thank you for choosing the Baseus AP01 Portable Cordless Car Vacuum. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read this manual thoroughly before use and retain it for future reference.

2. ຜະລິດຕະພັນເກີນview

The Baseus AP01 is a compact, cordless vacuum designed for quick and effective cleaning of various surfaces, including car interiors, pet hair, stairs, and sofas. Its high-speed motor delivers powerful suction for efficient debris removal.

2.1 ເນື້ອໃນຊຸດ

• Baseus AP01 Vacuum Cleaner
• 15 x Disposable Dust Bags
• 1 x 2-in-1 Suction Nozzle (Brush and Flat)
• ສາຍໄຟສາກແບັດ USB-C 1 x

2.2 ອົງປະກອບອຸປະກອນ

Figure 1: Baseus AP01 Portable Cordless Car Vacuum and Included Accessories. This image displays the Baseus AP01 portable cordless car vacuum cleaner along with its included accessories: 15 disposable dust bags, a 2-in-1 suction nozzle, and a USB-C charging cable.

3. ຕັ້ງຄ່າ

3.1 ການສາກໄຟເຄື່ອງດູດຝຸ່ນ

Before first use, fully charge the vacuum cleaner. Connect the provided USB-C charging cable to the vacuum's charging port and plug the other end into a compatible USB power adapter (not included). A full charge takes approximately 3 hours. The indicator light will show charging status.

Figure 2: Convenient USB-C Charging. This image illustrates the versatility of USB-C charging for the Baseus AP01 vacuum, showing it being charged both at home via a wall adapter and in a car using a car charger.

3.2 Installing the Dust Bag

The Baseus AP01 uses disposable dust bags for hygienic and convenient debris disposal.

1. Press the release button to detach the lid from the vacuum body.
2. Carefully insert a new disposable dust bag onto the lid, ensuring it is securely seated.
3. Reattach the lid with the installed dust bag to the vacuum body until it clicks into place.

Figure 3: Dust Bag Installation Instructions. This image illustrates the three steps for installing the disposable dust bag: 1. Press the button to remove the lid. 2. Insert the dust bag onto the lid. 3. Install the lid back on the vacuum.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

4.1 ການເປີດ/ປິດ

Press the power button located on the handle to turn the vacuum on. Press it again to turn the vacuum off.

4.2 Using the 2-in-1 Suction Nozzle

The included 2-in-1 nozzle can be used in two configurations:

• Nozzle ແປ: Ideal for general debris, crumbs, and larger particles on flat surfaces or in tight crevices.
• ຫົວແປງ: Slide the brush attachment forward for cleaning delicate surfaces, upholstery, pet hair, and dislodging stubborn dirt.

Figure 4: Deep Cleaning for Your Car. This image demonstrates the versatility of the 2-in-1 suction nozzle, showing its use as a brush nozzle for detailed cleaning and a flat nozzle for general debris removal in a car interior.

4.3 ປະສິດທິພາບການທຳຄວາມສະອາດ

The AP01 vacuum provides up to 5000Pa of suction power, effectively cleaning dust and dirt from various surfaces. A fully charged battery provides approximately 17 minutes of continuous use.

Figure 5: Effective Crevice and Corner Cleaning. This image demonstrates the Baseus AP01 vacuum's capability to effectively clean dust and debris from hard-to-reach areas such as sofa crevices and car seats.

5. ບໍາລຸງຮັກສາ

5.1 ການປ່ຽນຖົງຂີ້ຝຸ່ນ

The Baseus AP01 features a disposable dust bag system, eliminating the need to clean a dust bin or wash filters. When the dust bag is full, simply remove it and dispose of it. Replace with a new dust bag as per the installation instructions in Section 3.2.

Figure 6: Effortless Dust Bag Disposal. This image shows the simple process of disposing of the dust bag from the Baseus AP01 vacuum, highlighting the 'Effortless Dusting with Disposable Bag' feature and 99% dust removal rate.

Replacement dust bags can be purchased using ASIN: B0C76WV4R9.

5.2 ການອະນາໄມພາຍນອກ

ເຊັດດ້ານນອກຂອງເຄື່ອງດູດຝຸ່ນດ້ວຍຜ້າອ່ອນໆ, damp ຜ້າ. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງຫຼືເຄື່ອງເຮັດຄວາມສະອາດຂັດ. ກວດໃຫ້ແນ່ໃຈວ່າອຸປະກອນຖືກປິດ ແລະຖອດປລັກອອກກ່ອນທຳຄວາມສະອາດ.

6. ການແກ້ໄຂບັນຫາ

If you encounter issues with your Baseus AP01 vacuum, please refer to the following common problems and solutions:

• ບໍ່ມີພະລັງງານ: Ensure the vacuum is fully charged. Check the USB-C cable and power adapter connection.
• ດູດໜ້ອຍ: Check if the dust bag is full and needs replacement. Ensure the nozzle is free from blockages.
• ອາຍຸແບັດເຕີຣີສັ້ນ: Ensure the vacuum is fully charged before use. Battery life can vary based on usage intensity.
• ສິ່ງລົບກວນຜິດປົກກະຕິ: Turn off the vacuum immediately. Check for any foreign objects lodged in the nozzle or air intake.

The Baseus AP01 is equipped with 6 safety protections to ensure reliable operation:

• ການປ້ອງກັນວົງຈອນສັ້ນ
• ການປົກປ້ອງຄ່າເກີນ
• ການປົກປ້ອງອຸນຫະພູມເກີນ
• ການປ້ອງກັນການໄຫຼເກີນ
• Overvoltage ການປົກປ້ອງ
• ການປ້ອງກັນການຂັດຂວາງ

Figure 7: 6 Safety Protections with AI Chip. This diagram details the six integrated safety protections of the Baseus AP01 vacuum, including safeguards against short circuits, overcharging, overheating, over-discharging, overvoltage, and blockages, ensuring safe operation.

If problems persist, please contact Baseus customer support.

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Baseus products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Baseus website. If you require technical assistance or have questions about your Baseus AP01 vacuum, please contact Baseus customer support through their official channels.