GOOLOO GT4000S Jump Starter & GT150 Tire Inflator Instruction Manual

1. ບົດແນະນຳ

This manual provides essential instructions for the safe and effective operation of your GOOLOO GT4000S Jump Starter and GOOLOO GT150 Tire Inflator. Please read this manual thoroughly before use and retain it for future reference.

Image: The GOOLOO GT4000S Jump Starter (yellow and black unit with clamps) and the GOOLOO GT150 Tire Inflator (black rectangular unit with digital display).

2. ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

ປະຕິບັດຕາມຄວາມລະມັດລະວັງດ້ານຄວາມປອດໄພຕໍ່ໄປນີ້ສະເໝີເພື່ອປ້ອງກັນການບາດເຈັບ ຫຼືຄວາມເສຍຫາຍຕໍ່ອຸປະກອນ ແລະຍານພາຫະນະ:

• ອ່ານຄໍາແນະນໍາທັງຫມົດກ່ອນທີ່ຈະນໍາໃຊ້.
• Do not operate the jump starter if the cables or clamps ເສຍຫາຍ.
• Ensure correct polarity connection (red to positive, black to negative) to avoid sparks or damage.
• Do not jump start vehicles with battery voltage ນອກ ເໜືອ ຈາກ 12V.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
• Do not expose to rain or extreme temperatures.
• Do not use the tire inflator for purposes other than inflating tires or compatible items.
• Avoid over-inflating tires; always check recommended PSI.

3. ຜະລິດຕະພັນເກີນview

3.1 GOOLOO GT4000S Jump Starter

• ສູງສຸດໃນປະຈຸບັນ: 4000A
• ຄວາມເຂົ້າກັນໄດ້ຂອງເຄື່ອງຈັກ: ສູງສຸດ 12.0 ລິດ ນໍ້າມັນແອັດຊັງ, 10.0 ລິດ ນໍ້າມັນກາຊວນ
• ການສາກໄຟ: 100W Fast-Charging (1.2 hours for full charge, 5 minutes for a single jumpstart). Type-C port for charging.
• ຜົນຜະລິດ: Up to 100W for charging MacBooks and other laptops (Type-C port only).
• ຊີວິດຫມໍ້ໄຟ: Up to 60 jumpstarts on a single full charge.
• ຄວາມເຂົ້າກັນໄດ້: Suitable for RVs, pickup trucks, motorcycles, SUVs, tractors, boats, and other 12V vehicles.

Image: The GOOLOO GT4000S Jump Starter connected to a car battery in an engine bay, illustrating its primary function.

3.2 GOOLOO GT150 Tire Inflator

• ຄວາມກົດດັນສູງສຸດ: 150 PSI
• ຄວາມໄວອັດຕາເງິນເຟີ້: Inflates a completely flat 205/55 R16 car tire (0-36PSI) in approximately 7 minutes.
• ຄຸນສົມບັດ: Auto-shutoff, cordless design, portable size, ultra-bright LED screen for clear display.
• ຄວາມເຂົ້າກັນໄດ້: Suitable for car tires, SUV tires, motorcycle tires, bicycle tires, balls, kayaks, and swim rings.

Image: The GOOLOO GT150 Tire Inflator connected to a car tire, demonstrating its inflation capability.

4. ການຕິດຕັ້ງແລະການສາກໄຟ

4.1 Charging the GT4000S Jump Starter

1. Connect the provided USB-C cable to the jump starter's Type-C input port.
2. Connect the other end of the USB-C cable to a 100W fast-charging wall adapter (not included, unless specified in package contents) or a compatible car charger.
3. The display will show the charging wattage ແລະຫມໍ້ໄຟ percentage. A full charge from 0% to 100% typically takes 1.2 hours with a 100W charger.

Image: The GOOLOO GT4000S Jump Starter being charged via its USB-C port inside a vehicle, highlighting its fast-charging capability.

4.2 Charging the GT150 Tire Inflator

The GT150 Tire Inflator is charged via its USB-C port. Connect it to a compatible USB-C charger. The LED screen will indicate the charging status.

Image: The GOOLOO GT150 Tire Inflator connected to a smartphone via a USB cable, demonstrating its power bank functionality.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1 Using the GT4000S Jump Starter

1. Ensure the jump starter is sufficiently charged (above 20%).
2. ເຊື່ອມຕໍ່ສາຍ jumper clamps to the jump starter unit.
3. ຄັດຕິດ cl ສີແດງamp ກັບຈຸດບວກ (+) ຂອງຫມໍ້ໄຟລົດແລະ cl ສີດໍາamp ກັບຈຸດລົບ (-) terminal.
4. Turn on the jump starter. The screen should display "READY" if the connection is correct and the battery is detectable.
5. If the battery is completely dead or too low to detect, press the "BOOST" button for 1-2 seconds until "READY" is displayed. This forces the jump starter to provide maximum output.
6. ສະຕາດເຄື່ອງຈັກຂອງຍານພາຫະນະຂອງທ່ານພາຍໃນ 30 ວິນາທີ.
7. ເມື່ອລົດສະຕາດແລ້ວ, ໃຫ້ເອົາກະບອກອອກທັນທີamps ອອກຈາກແບັດເຕີຣີລົດ, ຈາກນັ້ນຕັດການເຊື່ອມຕໍ່ພວກມັນອອກຈາກເຄື່ອງສະຕາດ.

5.2 Using the GT150 Tire Inflator

1. Connect the air hose to the GT150 inflator and then securely attach it to the tire valve stem.
2. Turn on the GT150. The LED screen will display the current tire pressure.
3. Use the '+' and '-' buttons to set the desired target pressure.
4. Press the power button to start inflation. The inflator will automatically stop once the target pressure is reached.
5. Disconnect the air hose and store the unit.

Image: The GOOLOO GT150 Tire Inflator's LED screen showing both the real-time and preset tire pressure values, indicating its auto-shutoff feature.

6. ການ ບຳ ລຸງຮັກສາແລະການເກັບຮັກສາ

• Store the units in a cool, dry place away from direct sunlight and moisture.
• Recharge the jump starter every 3-6 months to maintain battery health, even if not used.
• Clean the units with a dry, soft cloth. Do not use harsh chemicals.

7. ການແກ້ໄຂບັນຫາ

8. ຂໍ້ມູນຈໍາເພາະ

GOOLOO GT4000S Jump Starter

• ສູງສຸດ Ampອາຍຸ: 4000A
• ສະບັບtage: 12V
• ປະເພດຫມໍ້ໄຟ: ລິດທຽມ-ໄອອອນ
• ການປ້ອນຂໍ້ມູນການສາກໄຟ: USB-C (100W Max)
• USB Output: USB-C (100W Max), USB-A (various outputs)

GOOLOO GT150 Tire Inflator

• ຄວາມກົດດັນສູງສຸດ: 150 PSI
• ແຫຼ່ງພະລັງງານ: Cordless (Internal Battery)
• ຈໍສະແດງຜົນ: Ultra Bright LED Screen

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official GOOLOO website. Please have your model numbers (GT4000S, GT150) ready when contacting support.