ຄູ່ມື+

WALI GSMU001XL

WALI GSMU001XL Single Monitor Gas Spring Desk Mount Instruction Manual

Model: GSMU001XL

ສິນຄ້າເກີນview

The WALI GSMU001XL is a heavy-duty single monitor gas spring desk mount designed to support ultrawide or curved LCD/LED screens ranging from 17 inches to 49 inches. It can hold monitors weighing up to 44 lbs and is compatible with VESA mounting patterns of 75x75mm and 100x100mm. This mount offers full adjustability for optimal viewing angles and includes integrated USB Type-C and USB Type-A 3.0 ports for convenient connectivity.

The mount features a two-stage locking system, supporting both C-clamp and Grommet Base installations on desks with a thickness between 0.47 inches and 1.97 inches.

ເນື້ອໃນຊຸດ

Before beginning installation, please ensure all components are present and undamaged. If any parts are missing or damaged, contact WALI customer support.

  • 1 x WALI Ultrawide Monitor Desk Mount (GSMU001XL)
  • ຊຸດອຸປະກອນຕິດຕັ້ງ (ສະກູ, ແຜ່ນຮອງ, ຕົວກັ້ນ, ປະແຈ Allen)
  • ຄູ່ມືຜູ້ໃຊ້

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Follow these steps carefully to install your WALI GSMU001XL monitor mount. Two installation methods are available: C-clamp and Grommet Base.

ຂັ້ນຕອນທີ 1: ເລືອກວິທີການຕິດຕັ້ງ

Determine whether to use the C-clamp or Grommet Base. Both methods are compatible with desk thicknesses from 0.47 inches to 1.97 inches.

ຮູບພາບສະແດງໃຫ້ເຫັນ C-clamp and Grommet base mounting options for desks between 0.47 and 1.97 inches thick.
Figure 1: C-clamp and Grommet base mounting options. The C-clamp secures to the edge of the desk, while the Grommet base uses an existing hole in the desk.

Step 2: Assemble the Base and Arm

Assemble the base according to your chosen mounting method (C-clamp or Grommet Base). Attach the lower arm section to the base.

ຂັ້ນຕອນທີ 3: ແນບແຜ່ນ VESA ໃສ່ຈໍພາບ

Attach the VESA plate to the back of your monitor using the appropriate screws from the hardware kit. Ensure the screws are tightened securely but do not overtighten.

Step 4: Mount Monitor to Arm

Carefully slide the monitor (with the attached VESA plate) onto the upper arm section. Ensure it locks into place. It is recommended to have assistance when mounting heavier monitors.

Diagram illustrating the 3-step fast setup process: 1) Attach base to desk, 2) Connect arm sections, 3) Slide VESA-mounted monitor onto the arm.
Figure 2: Simplified 3-step setup process for the monitor arm.

Step 5: Connect USB Cables

Connect the integrated USB Type-C and USB Type-A 3.0 ports on the mount to your computer using the provided cables. Route cables through the arm's cable management channels for a tidy setup.

Close-up of the monitor arm's base showing integrated USB-A and USB-C ports, with a phone charging via USB-C.
Figure 3: Detachable USB connector for cable management and device charging.

ການດໍາເນີນງານຂອງ Monitor Arm

The WALI GSMU001XL monitor arm offers extensive adjustability to achieve an ergonomic viewຕໍາ​ແຫນ່ງ.

ການປັບຕຳແໜ່ງຈໍພາບ

The arm allows for the following movements:

  • ອຽງ: Adjust the monitor angle from +50° to -20°.
  • ໝູນ: Rotate the monitor horizontally up to +90°/-90°.
  • ໝຸນ: Rotate the monitor 360° to switch between landscape and portrait modes.
  • ການປັບຄວາມສູງ: The gas spring arm allows for a height range of 9.09 inches to 19.69 inches.
  • ສ່ວນຂະຫຍາຍ: The arm can extend up to 21.93 inches.
Diagram showing the swivel, tilt, and rotate capabilities of the monitor arm, with maximum arm extension indicated.
Figure 4: Demonstrates the full range of motion for swivel, tilt, and rotation.

ການປັບລະດັບຄວາມເຄັ່ງຕຶງຂອງພາກຮຽນ spring Gas

The gas spring tension must be adjusted to match your monitor's weight for proper balance and movement. Use the provided Allen wrench to adjust the tension screw located on the arm.

  • To adjust for lighter monitors or if the monitor floats up: Turn the tension screw ຕາມເຂັມໂມງ.
  • To adjust for heavier monitors or if the monitor sags down: Turn the tension screw ກົງກັນຂ້າມກັບເຂັມໂມງ.

Adjust gradually until the monitor stays in position when released.

Diagram showing the height range of the pneumatic arm and instructions for tension adjustment: clockwise for lighter monitors, counter-clockwise for heavier monitors.
Figure 5: Height range and tension adjustment mechanism of the pneumatic arm.

ບໍາລຸງຮັກສາ

To ensure the longevity and proper function of your WALI monitor arm, follow these simple maintenance guidelines:

  • ທໍາຄວາມສະອາດ: ເຊັດແຂນແລະຖານດ້ວຍຜ້າອ່ອນ, ງamp ຜ້າ. ຫຼີກລ້ຽງການເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍທີ່ອາດຈະທໍາລາຍການສໍາເລັດຮູບ.
  • ກວດ​ສອບ​ເປັນ​ໄລ​ຍະ​: ກວດເບິ່ງທຸກສະກູແລະການເຊື່ອມຕໍ່ເປັນໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນແຫນ້ນແຫນ້ນ. ເຄັ່ງຄັດຄືນໃໝ່ຖ້າຈຳເປັນ.
  • ອາຍແກັສ Spring: The gas spring is designed for long-term use and typically requires no maintenance. If you notice changes in its performance, refer to the troubleshooting section.

ການແກ້ໄຂບັນຫາ

ຖ້າທ່ານພົບບັນຫາກັບແຂນຕິດຕາມຂອງທ່ານ, ອ້າງອີງເຖິງບັນຫາທົ່ວໄປຕໍ່ໄປນີ້ແລະວິທີແກ້ໄຂ:

Problem: Monitor Sags or Drops

ການແກ້ໄຂ: The gas spring tension is likely too low for your monitor's weight. Turn the tension screw ກົງກັນຂ້າມກັບເຂັມໂມງ to increase tension until the monitor holds its position.

Problem: Monitor Floats Up or is Difficult to Push Down

ການແກ້ໄຂ: The gas spring tension is likely too high for your monitor's weight. Turn the tension screw ຕາມເຂັມໂມງ to decrease tension until the monitor holds its position.

Problem: Monitor is Unstable or Wobbles

ການແກ້ໄຂ:

  • Ensure all mounting screws (desk clamp/grommet, VESA plate, arm connections) are securely tightened.
  • Verify that your desk is stable and can support the weight of the mount and monitor.

Problem: USB Ports Not Functioning

ການແກ້ໄຂ:

  • Ensure the USB cables from the monitor arm are properly connected to your computer's USB ports.
  • Test with different USB devices or computer ports to rule out device or port issues.

If problems persist after attempting these solutions, please contact WALI customer support.

ຂໍ້ມູນຈໍາເພາະ

ຄຸນສົມບັດຂໍ້ມູນຈໍາເພາະ
ໝາຍເລກຕົວແບບGSMU001XL
ຍີ່ຫໍ້ວໍລີ
ຕິດຕາມຄວາມເຂົ້າກັນໄດ້ຂອງຂະຫນາດ17" to 49" Ultrawide/Curved
ຄວາມອາດສາມາດນ້ໍາຫນັກສູງສຸດ 44 lbs (20 kg)
ຄວາມເຂົ້າກັນໄດ້ຂອງ VESA75x75mm, 100x100mm
ຄວາມເຂົ້າກັນໄດ້ຂອງຄວາມໜາຂອງໂຕະ0.47"-1.97" (1.2ຊມ-5ຊມ)
ປະເພດການຕິດຕັ້ງC-clamp, ຖານ Grommet
ມຸມອຽງ+50° / -20°
ມຸມຫມຸນ+90° / -90°
ພືດຫມູນວຽນ360° (ແນວນອນເປັນຮູບຄົນ)
ລະດັບຄວາມສູງ9.09"-19.69" (23.1ຊມ-50ຊມ)
Max Arm Extension21.93" (55.7ຊມ)
Integrated Ports1 x USB Type-C, 1 x USB Type-A 3.0
ວັດສະດຸອາລູມີນຽມ
ສີດຳ

ວິດີໂອຜະລິດຕະພັນ

Video demonstrating the features and functionality of the WALI Single Monitor Gas Spring Desk Mount.

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information or technical assistance, please contact WALI customer support. WALI provides experienced and friendly US-based customer support available to assist 7 days a week.

ໃຫ້ອ້າງອີງໃສ່ການຫຸ້ມຫໍ່ຜະລິດຕະພັນ ຫຼື WALI ຢ່າງເປັນທາງການ webເວັບໄຊສໍາລັບລາຍລະອຽດການຕິດຕໍ່ໃນປະຈຸບັນຫຼາຍທີ່ສຸດແລະເງື່ອນໄຂການຮັບປະກັນ.

ເອກະສານທີ່ກ່ຽວຂ້ອງ - GSMU001XL

ກ່ອນview WALI GSMP001 ຄູ່ມືການຕິດຕັ້ງ Desk Mount Single Monitor
ຄູ່ມືການຕິດຕັ້ງທີ່ສົມບູນແບບສໍາລັບ WALI GSMP001 Single Monitor Desk Mount. ຄູ່ມືນີ້ໃຫ້ຄໍາແນະນໍາຂັ້ນຕອນໂດຍຂັ້ນຕອນສໍາລັບການຕັ້ງແຂນຕິດຕາມກວດກາ, ລວມທັງ clamp ແລະທາງເລືອກໃນການຕິດຕັ້ງ grommet, ການຕິດແຜ່ນ VESA, ແລະການປັບຄວາມກົດດັນ. ຮອງຮັບຈໍພາບໄດ້ເຖິງ 32 ນິ້ວ ແລະ 9kg.
ກ່ອນview ຄູ່ມືການຕິດຕັ້ງແຂນ WALI GSM001XL-P Heavy-Duty Monitor
ຄູ່ມືການຕິດຕັ້ງທີ່ສົມບູນແບບສໍາລັບ WALI GSM001XL-P Heavy-Duty Monitor Arm. ປະກອບມີລາຍການຊິ້ນສ່ວນ, ຄໍາແນະນໍາການປະກອບຂັ້ນຕອນໂດຍຂັ້ນຕອນ, ແລະຄໍາແນະນໍາການຕິດຕັ້ງສໍາລັບໂຕະແລະເຄື່ອງກອງ.
ກ່ອນview WALI GSAM001 Single Gas Spring Monitor ຄູ່ມືການຕິດຕັ້ງແຂນ
ຄູ່ມືທີ່ສົມບູນແບບສໍາລັບການຕິດຕັ້ງແລະການນໍາໃຊ້ WALI GSAM001 Single Gas Spring Monitor Arm. ຮວມເອົາລາຍການພາກສ່ວນ, ຄຳແນະນຳເທື່ອລະຂັ້ນຕອນ, ແລະລາຍລະອຽດການປັບຕົວສຳລັບຕຳແໜ່ງການຕິດຕາມທີ່ດີທີ່ສຸດ.
ກ່ອນview WALI GSDM003LP ຄູ່ມືການຕິດຕັ້ງ Desk Mount Monitor
ຄູ່ມືການຕິດຕັ້ງທີ່ສົມບູນແບບສໍາລັບ WALI GSDM003LP dual monitor and laptop desk mount. ຄຸນນະສົມບັດຄວາມເຂົ້າກັນໄດ້ຂອງ VESA, ແຂນທີ່ສາມາດປັບໄດ້, ແລະຂັ້ນຕອນການປະກອບລະອຽດສໍາລັບການຕິດຕັ້ງທີ່ປອດໄພແລະ ergonomic.
ກ່ອນview ຄູ່ມືການຕິດຕັ້ງ WALI GSMP002 Dual Monitor Desk Mount
ຄູ່ມືການຕິດຕັ້ງແບບເທື່ອລະຂັ້ນຕອນສໍາລັບ WALI GSMP002 dual monitor desk mount, covering clamp ແລະການຕິດຕັ້ງ grommet, ການຕິດແຜ່ນ VESA, ແລະການປັບຄວາມກົດດັນຂອງພາກຮຽນ spring ອາຍແກັສ. ຮວມເຖິງການເຕືອນຄວາມປອດໄພ ແລະ ການລະບຸສ່ວນ.
ກ່ອນview ຄູ່ມືການຕິດຕັ້ງ WALI GSM001XL Single Monitor Desk Mount
ຄູ່ມືການຕິດຕັ້ງແບບເທື່ອລະຂັ້ນຕອນສໍາລັບ WALI GSM001XL single monitor desk mount. ລວມມີລາຍການຊິ້ນສ່ວນ, ຄຳເຕືອນຄວາມປອດໄພ ແລະຄຳແນະນຳການປະກອບສຳລັບການຕິດຕັ້ງຈໍພາບຂອງທ່ານຢ່າງປອດໄພ.