Pulsar 2,400W Portable Gas-Powered Quiet Inverter Generator

ແນະນຳ

This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your Pulsar GD240N portable inverter generator. Please read this manual thoroughly before operating the generator to ensure proper usage and longevity of the product.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• 2400W starting watts, 1800W running watts
• Type A & Type C USB ports
• ການດໍາເນີນງານທີ່ງຽບສະຫງົບ Super
• Three-in-one switch for simplified control
• Parallel capability to combine with another unit for increased power output
• Enhanced fuel efficiency

ຂໍ້ມູນຄວາມປອດໄພ

ອັນຕະລາຍ: ອັນຕະລາຍຈາກຄາບອນໂມໂນໄຊ

Using a generator indoors WILL KILL YOU IN MINUTES. Generator exhaust contains poisonous carbon monoxide gas that can cause unconsciousness or DEATH. Operate in well-ventilated, outdoor areas away from open windows or doors. Point exhaust away from occupied areas. Do not run generator in enclosed areas (e.g., not in house or garage). Move to fresh air and get medical help if sick, dizzy, or weak.

Always ensure the generator is placed on a level surface and away from any flammable materials. Keep children and pets away from the operating unit.

ເນື້ອໃນຊຸດ

Your Pulsar GD240N generator package includes the following items:

• Pulsar GD240N Portable Inverter Generator
• ຄູ່ມືເຈົ້າຂອງ
• Funnel ນ້ ຳ ມັນ
• Basic Tool Kit (screwdriver)

ຕັ້ງຄ່າ

ເພີ່ມນ້ຳມັນເຄື່ອງ

Before starting the generator for the first time, you must add engine oil. The generator is shipped without oil.

1. Locate the oil fill cap on the side of the generator.
2. Remove the side panel by unscrewing the two screws.
3. ເອົາຝາປິດໃສ່ນໍ້າມັນ/ຈຸ່ມ.
4. Using the provided funnel, carefully add 5W-30 engine oil until it reaches the upper mark on the dipstick. The oil capacity is approximately 0.33 - 0.35 US Quarts (11.2 oz).
5. Replace the oil fill cap and secure the side panel.

Image: Locating the oil fill cap and adding 5W-30 engine oil to the Pulsar GD240N inverter generator.

ການເພີ່ມນໍ້າມັນ

Use only fresh, unleaded gasoline with an octane rating of 87 or higher. Do not use E85 fuel.

1. Ensure the generator is on a level surface and the engine is off and cool.
2. ຫັນນັອດfuelາປິດນໍ້າມັນອອກ.
3. Carefully fill the fuel tank (capacity 1.18 Gallons) with gasoline, leaving a small air gap at the top to allow for fuel expansion.
4. ປ່ຽນຝາອັດນ້ຳມັນຢ່າງປອດໄພ.

ການຄວບຄຸມview

Familiarize yourself with the control panel located on the front of the generator:

• ສະຫຼັບເຄື່ອງຈັກ: A three-in-one switch for OFF, RUN, and CHOKE positions.
• Eco Mode Switch: Activates or deactivates Eco mode for improved fuel efficiency and quieter operation under light loads.
• AC 120V 20A Outlets: Two standard household outlets.
• AC 120V 30A Outlet: For higher power demands (e.g., RVs).
• ພອດ USB: Includes Type A and Type C ports for charging electronic devices.
• ຮູສຽບ DC 12V: For 12-volt DC appliances.
• Circuit Breaker/Reset Button: Resets the circuit in case of an overload.
• Parallel Connection Ports: Allows connection of two compatible generators for increased power.
• ແສງຕົວຊີ້ວັດ: Displays status for Low Oil, Overload, and Output.

ຮູບພາບ: ລາຍລະອຽດ view of the Pulsar GD240N control panel, showing AC outlets, USB ports, DC 12V outlet, and various switches and indicator lights.

ຄໍາແນະນໍາການດໍາເນີນງານ

ການເລີ່ມຕົ້ນເຄື່ອງກໍາເນີດໄຟຟ້າ

1. Ensure the generator has sufficient oil and fuel.
2. ໝຸນວາວນໍ້າມັນເຊື້ອໄຟໄປທີ່ຕຳແໜ່ງ 'ເປີດ'.
3. Move the engine switch to the 'CHOKE' position (if the engine is cold).
4. ດຶງມືຈັບ starter recoil ໃຫ້ແຫນ້ນຈົນກ່ວາເຄື່ອງຈັກເລີ່ມຕົ້ນ.
5. Once the engine starts, gradually move the engine switch to the 'RUN' position.
6. ປ່ອຍໃຫ້ເຄື່ອງກຳເນີດໄຟຟ້າອຸ່ນຂຶ້ນສອງສາມນາທີກ່ອນທີ່ຈະເຊື່ອມຕໍ່ກະແສໄຟຟ້າ.

Image: The side of the Pulsar GD240N generator showing the engine switch in the 'RUN' position.

ໂໝດ Eco

The Eco Mode switch allows the generator to adjust engine speed based on the load, optimizing fuel consumption and reducing noise levels. For light loads, switch to 'ON' for quieter and more efficient operation. For heavy loads or when starting high-demand appliances, switch to 'OFF' to ensure full power is available.

ການເຊື່ອມຕໍ່ອຸປະກອນ

Connect your electrical devices to the appropriate outlets on the control panel. Ensure that the total wattage ຂອງອຸປະກອນທີ່ເຊື່ອມຕໍ່ບໍ່ເກີນ wat ແລ່ນຂອງເຄື່ອງກໍາເນີດໄຟຟ້າtage (1800W) to prevent overloading.

ການປະຕິບັດງານແບບຂະຫນານ

The Pulsar GD240N is equipped with parallel connection ports, allowing you to link two compatible Pulsar inverter generators together to double your power output. Refer to the parallel kit's instruction manual for detailed connection procedures.

ບໍາລຸງຮັກສາ

Regular maintenance is crucial for the optimal performance and longevity of your generator. Always ensure the engine is off and cool before performing any maintenance.

ປ່ຽນນ້ຳມັນເຄື່ອງ

Change the engine oil after the first 20 hours of use or the first month, whichever comes first. Subsequent oil changes should be performed every 100 hours or every 6 months.

1. Place a suitable container under the oil drain plug.
2. Remove the oil drain plug and the oil fill cap to allow the oil to drain completely.
3. Once drained, replace the oil drain plug.
4. Refill with fresh 5W-30 engine oil as described in the 'Adding Engine Oil' section.

Spark Plug Access

The spark plug is accessible for inspection and replacement. Remove the spark plug cover to access the spark plug. Inspect the spark plug for wear and proper gap. Replace if necessary.

Spark Arrestor

The generator is equipped with a spark arrestor, making it US Forestry approved. Regularly inspect and clean the spark arrestor to prevent carbon buildup, which can restrict exhaust flow and affect performance. Refer to the owner's manual for detailed cleaning instructions.

ຮູບພາບ: ດ້ານຫລັງ view of the Pulsar GD240N generator, highlighting the exhaust port and spark arrestor.

ການແກ້ໄຂບັນຫາ

If your generator experiences issues, consult the following common troubleshooting tips:

ແສງຕົວຊີ້ວັດ

• ແສງສະຫວ່າງນ້ໍາມັນຕ່ໍາ: If illuminated, check and add engine oil. The generator may shut down automatically to prevent engine damage.
• Overload Light: If illuminated, the generator is overloaded. Disconnect some devices and press the reset button.
• ແສງອອກ: A green light indicates normal power output.

ບັນຫາທົ່ວໄປ

• ເຄື່ອງຈັກຈະບໍ່ເລີ່ມຕົ້ນ: Check fuel level, oil level, spark plug, and ensure the engine switch is in the correct position.
• ບໍ່ມີພະລັງງານອອກ: Check for tripped circuit breakers, ensure the generator is not overloaded, and verify all connections.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ຂໍ້ມູນການຮັບປະກັນ

This Pulsar GD240N inverter generator comes with a 2-Year Manufacturer's Warranty. Please retain your proof of purchase for warranty claims.

ການຊ່ວຍເຫຼືອລູກຄ້າ

For technical assistance, warranty inquiries, or to order replacement parts, please contact Pulsar Products customer support. Refer to the official Pulsar webເວັບໄຊ ຫຼືເອກະສານການຊື້ຂອງເຈົ້າສຳລັບລາຍລະອຽດການຕິດຕໍ່.