1. ບົດແນະນຳ
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Erayak 2400P Portable Generator and Wheel Kit Bundle. This bundle is designed to provide reliable and portable power for various applications, including home backup, camping, and outdoor activities. Please read this manual thoroughly before operating the generator to ensure proper use and to prevent injury or damage.

Figure 1.1: Erayak 2400P Portable Generator with Wheel Kit.
This image displays the Erayak 2400P portable generator in red and black, equipped with the included wheel kit. The telescopic handle is extended, and the generator is positioned as if being pulled, highlighting its portability. The wheels are orange, contrasting with the main unit's color scheme.
2. ຂໍ້ມູນຄວາມປອດໄພ
Always follow these safety precautions to prevent serious injury or death. Failure to do so can result in electric shock, fire, or carbon monoxide poisoning.
- ອັນຕະລາຍຄາບອນໂມໂນໄຊ: Generators produce carbon monoxide, a colorless, odorless, poisonous gas. Operate the generator outdoors in a well-ventilated area, far away from windows, doors, and vents. Never operate indoors, in a garage, or in any enclosed space.
- ອັນຕະລາຍຈາກໄຟຟ້າຊ໊ອດ: ຢ່າໃຊ້ເຄື່ອງກຳເນີດໄຟຟ້າໃນສະພາບທີ່ປຽກຊຸ່ມ. ຮັບປະກັນວ່າຈຸດເຊື່ອມຕໍ່ທັງໝົດແຫ້ງ ແລະ ແໜ້ນໜາ. ຢ່າແຕະຕ້ອງເຄື່ອງກຳເນີດໄຟຟ້າດ້ວຍມືປຽກ.
- ອັນຕະລາຍໄຟ: ນໍ້າມັນແອັດຊັງເປັນນໍ້າມັນໄວໄຟຫຼາຍ. ຕື່ມນໍ້າມັນເຊື້ອໄຟໃນບໍລິເວນທີ່ມີລະບາຍອາກາດດີ ໂດຍປິດເຄື່ອງຈັກ ແລະ ເຮັດໃຫ້ເຢັນ. ຢ່າສູບຢາ ຫຼື ປ່ອຍໃຫ້ມີແປວໄຟຢູ່ໃກ້ເຄື່ອງກຳເນີດໄຟຟ້າ. ເກັບຮັກສານໍ້າມັນເຊື້ອໄຟໄວ້ໃນພາຊະນະທີ່ໄດ້ຮັບການອະນຸມັດ.
- ພື້ນຜິວຮ້ອນ: The generator's engine and muffler become very hot during operation and remain hot for some time after shutdown. Avoid touching hot surfaces to prevent burns.
- ການຕັ້ງພື້ນທີ່ເຫມາະສົມ: Always ensure the generator is properly grounded before operation to prevent electrical shock.
- ເດັກນ້ອຍແລະສັດລ້ຽງ: Keep children and pets away from the generator during operation and while it is cooling down.
3. ເນື້ອໃນຊຸດ
ກວດສອບວ່າລາຍການທັງຫມົດແມ່ນມີຢູ່ໃນຊຸດ:
- Erayak 2400P Portable Inverter Generator
- Wheel Kit (includes telescopic handle, never-flat tires, and mounting hardware)
- Wrench Plug Spark
- Funnel ນ້ ຳ ມັນ
- ຄູ່ມືຜູ້ໃຊ້
4. ການຕິດຕັ້ງແລະການປະກອບ
4.1. Wheel Kit Assembly
The wheel kit enhances the portability of your Erayak 2400P generator. Follow these steps to attach it:
- Carefully unbox the generator and wheel kit components.
- Locate the mounting points on the generator's base for the wheel axles.
- Attach the never-flat tires to the axles using the provided hardware (washers, nuts, cotter pins). Ensure they are securely fastened but can rotate freely.
- Insert the telescopic handle into its designated slot on the generator. Secure it with the locking mechanism or pins as instructed in the wheel kit's specific guide.
- Verify that the wheels are firmly attached and the handle extends and retracts smoothly.

Figure 4.1: Generator with Wheel Kit Attached.
This image shows the Erayak 2400P generator with the wheel kit fully assembled. The red and black generator body is visible, with the orange wheels and the silver telescopic handle in its retracted position, demonstrating the compact form factor with the kit installed.
4.2. ການເພີ່ມນ້ຳມັນເຊື້ອໄຟ ແລະ ນ້ຳມັນ
Before first use, and before each subsequent use, ensure proper fuel and oil levels.
- ນ້ຳມັນເຄື່ອງ:
- ເອົາຝາປິດໃສ່ນໍ້າມັນ/ຈຸ່ມ.
- Using the provided oil funnel, slowly add recommended 4-stroke engine oil (e.g., SAE 10W-30) until it reaches the upper mark on the dipstick. Do not overfill.
- ປິດຝາປິດ/ໄມ້ວັດລະດັບນ້ຳມັນເຄື່ອງໃຫ້ແໜ້ນ.
- ນໍ້າມັນເຊື້ອໄຟ:
- ໃຫ້ແນ່ໃຈວ່າເຄື່ອງກໍາເນີດປິດແລະເຢັນ.
- ເປີດຝາຖັງນໍ້າມັນ.
- Carefully pour fresh, unleaded gasoline (minimum 87 octane) into the fuel tank. Do not fill above the red indicator line or the bottom of the filler neck.
- ປິດຝາຖັງນໍ້າມັນເຊື້ອໄຟໃຫ້ແໜ້ນ.

Figure 4.2: Generator Control Panel.
ຮູບພາບນີ້ໃຫ້ລາຍລະອຽດ view of the control panel on the Erayak 2400P generator. Visible elements include the fuel cap, engine switch, ECO mode switch, various power outlets (AC 120V, DC 12V), circuit breakers, and the digital display showing output information. This panel is where users will interact for starting, operating, and monitoring the generator.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
5.1. ການເລີ່ມຕົ້ນເຄື່ອງກໍາເນີດໄຟຟ້າ
- ວາງເຄື່ອງກຳເນີດໄຟຟ້າໄວ້ເທິງໜ້າດິນທີ່ແຂງ ແລະ ຮາບພຽງກາງແຈ້ງ, ຫ່າງຈາກວັດສະດຸທີ່ຕິດໄຟໄດ້ ແລະ ຢ່າງໜ້ອຍ 20 ຟຸດຈາກຊ່ອງເປີດຂອງອາຄານ.
- ໃຫ້ແນ່ໃຈວ່າວາວນໍ້າມັນເຊື້ອໄຟຢູ່ໃນຕຳແໜ່ງ "ເປີດ".
- Turn the engine switch to the "START" position.
- Pull the recoil starter handle firmly and smoothly until the engine starts. You may need to pull several times.
- Once the engine starts, slowly return the engine switch to the "RUN" position.
- Allow the generator to warm up for a few minutes before connecting any electrical devices.
5.2. ການເຊື່ອມຕໍ່ອຸປະກອນໄຟຟ້າ
- ໃຫ້ແນ່ໃຈວ່າເຄື່ອງກຳເນີດໄຟຟ້າເຮັດວຽກຢ່າງໝັ້ນຄົງ.
- Plug your electrical devices into the appropriate AC 120V or DC 12V outlets on the control panel.
- ຢ່າໂຫຼດເຄື່ອງກຳເນີດໄຟຟ້າເກີນ. ວັດທັງໝົດtage of connected devices must not exceed the generator's running wattage (2400 ວັດ).
- If an overload occurs, the circuit breaker may trip. Disconnect some devices, then reset the circuit breaker.
5.3. ECO Mode Operation
The Erayak 2400P features an ECO mode for improved fuel efficiency and reduced noise when operating at lower loads.
- To activate ECO mode, switch the ECO mode switch to the "ON" position. The generator's engine speed will automatically adjust to match the load, saving fuel.
- For full power or when starting high-demand appliances, switch the ECO mode to the "OFF" position.

Figure 5.1: Quiet Operation with ECO Mode.
This image illustrates the quiet operation of the Erayak 2400P generator, positioned on a patio while people are relaxing nearby. A sound wave graphic indicates low noise levels, emphasizing the "Super Quiet" feature, especially beneficial when using ECO mode for extended periods.
5.4. ປິດເຄື່ອງກໍາເນີດໄຟຟ້າ
- ຖອດອຸປະກອນໄຟຟ້າທັງໝົດອອກຈາກເຄື່ອງກຳເນີດໄຟຟ້າ.
- ປ່ອຍໃຫ້ເຄື່ອງກຳເນີດໄຟຟ້າເຮັດວຽກສອງສາມນາທີໂດຍບໍ່ຕ້ອງໂຫຼດເພື່ອໃຫ້ເຢັນລົງ.
- ຫັນປ່ຽນເຄື່ອງຈັກໄປຫາຕໍາແຫນ່ງ "ປິດ".
- ຫັນປ່ຽງນໍ້າມັນໄປຫາຕໍາແຫນ່ງ "ປິດ".
6. ບໍາລຸງຮັກສາ
ການບໍາລຸງຮັກສາເປັນປົກກະຕິແມ່ນສໍາຄັນຕໍ່ອາຍຸຍືນແລະການປະຕິບັດທີ່ດີທີ່ສຸດຂອງເຄື່ອງກໍາເນີດໄຟຟ້າຂອງທ່ານ. ໃຫ້ແນ່ໃຈວ່າເຄື່ອງປັ່ນໄຟປິດແລະເຢັນກ່ອນທີ່ຈະດໍາເນີນການບໍາລຸງຮັກສາໃດໆ.
6.1. Engine Oil Check and Change
- ກວດສອບ: Before each use, check the oil level using the dipstick. Add oil if necessary.
- ການປ່ຽນແປງ: Change the engine oil after the first 20 hours of operation, and then every 50-100 hours or annually, whichever comes first. Refer to the engine oil section for type and capacity.
6.2. ການເຮັດຄວາມສະອາດການກັ່ນຕອງອາກາດ
- Inspect the air filter every 50 hours or more frequently in dusty conditions.
- Remove the air filter cover and carefully remove the foam filter element.
- Wash the filter element in warm, soapy water, rinse thoroughly, and allow it to air dry completely. Lightly oil the filter with engine oil before reinstallation.
6.3. ການກວດກາປລັກສຽບໄຟ
- Inspect the spark plug every 100 hours or annually.
- Remove the spark plug using the provided spark plug wrench.
- Check for carbon buildup or wear. Clean or replace if necessary. Ensure the gap is correct according to specifications.
6.4. ການເກັບຮັກສາ
- ສຳລັບການເກັບຮັກສາໄລຍະຍາວ (ຫຼາຍກວ່າ 30 ມື້), ໃຫ້ລະບາຍຖັງນໍ້າມັນເຊື້ອໄຟ ແລະ ຄາບູເລເຕີ, ຫຼື ໃຊ້ຕົວຄວບຄຸມຄວາມໝັ້ນຄົງນໍ້າມັນເຊື້ອໄຟ.
- ປ່ຽນນ້ຳມັນເຄື່ອງ.
- ທຳຄວາມສະອາດພາຍນອກຂອງເຄື່ອງກຳເນີດໄຟຟ້າ.
- ເກັບຮັກສາໄວ້ໃນບ່ອນທີ່ສະອາດ, ແຫ້ງ, ມີລະບາຍອາກາດດີ, ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະ ອຸນຫະພູມສູງສຸດ.
7. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ເຄື່ອງຈັກຈະບໍ່ເລີ່ມຕົ້ນ | No fuel; Low oil level; Spark plug issue; Engine switch OFF | Add fuel; Add oil; Inspect/clean/replace spark plug; Turn engine switch to RUN/START |
| ບໍ່ມີຜົນຜະລິດພະລັງງານ | Circuit breaker tripped; Overload; ECO mode ON (for high load) | Reset circuit breaker; Reduce load; Turn ECO mode OFF |
| ເຄື່ອງຈັກແລ່ນຫຍາບຄາຍ | ເຊື້ອໄຟ Stale; ການກັ່ນຕອງອາກາດອຸດຕັນ; ຫົວທຽນເປື້ອນ | Drain and replace fuel; Clean air filter; Clean/replace spark plug |
| ເຄື່ອງກໍາເນີດໄຟຟ້າຖືກປິດໃນລະຫວ່າງການປະຕິບັດງານ | Low oil shutdown; Overload; Overheating | Check oil level; Reduce load; Allow to cool down in a well-ventilated area |
8. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ຍີ່ຫໍ້ | ERAYAK |
| ຊື່ຕົວແບບ | Erayak 2400P |
| ຜົນຜະລິດວັດtage | 2400 Watts (Peak) / 2400 Watts (Running) |
| ປະເພດນໍ້າມັນເຊື້ອໄຟ | ນ້ຳມັນເຊື້ອໄຟ |
| ປະເພດເຄື່ອງຈັກ | 4 ເສັ້ນເລືອດຕັນໃນ |
| ການຍ້າຍເຄື່ອງຈັກ | 418 ຊັງຕີແມັດກ້ອນ |
| ຄຸນນະສົມບັດພິເສດ | Portable, Super Quiet, Fuel Efficient |
| ອົງປະກອບລວມ | ຊຸດລໍ້ |
| ສີ | ສີແດງ |
| ປລັກສຽບໄຟທັງໝົດ | 1 (AC 120V, DC 12V) |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
ERAYAK products are manufactured to high-quality standards. For warranty information, technical support, or to purchase replacement parts, please contact ERAYAK customer service. Keep your purchase receipt as proof of purchase for warranty claims.
Visit the official ERAYAK store for more information: ERAYAK Store on Amazon



