1. ບົດແນະນຳ
This manual provides comprehensive instructions for the installation, operation, and maintenance of your MONTECH HyperFlow ARGB 360 AIO CPU Liquid Cooler. Designed for optimal thermal performance, this cooler features an enhanced 3100RPM water pump and three Metal Pro 12 ARGB cooling fans, ensuring efficient heat dissipation for Intel and AMD compatible systems.
2. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ
- Industry-leading 6-year warranty period for peace of mind.
- Gemstone design water pump with a rapid 3100RPM speed for efficient heat dissipation.
- Metal Pro 12 ARGB 28mm Fans operating at 2200 RPM for robust airflow pressure.
- Slim 27mm radiator with a single-row 20FPI fin design for powerful and efficient cooling.
- Flexible compatibility with Intel LGA 1700/1200/15X/2066 and AMD AM3/AM4/AM5 motherboard platforms.
- Simplified cable management with a pre-connected 7-pin short cable, compatible with 4-pin and 5V3pin connectors.
- Pre-installed fans and pre-applied thermal paste for quick setup.
3. ເນື້ອໃນຊຸດ
ກວດສອບວ່າອົງປະກອບທັງຫມົດແມ່ນມີຢູ່ກ່ອນທີ່ຈະເລີ່ມຕົ້ນການຕິດຕັ້ງ:
- MONTECH HyperFlow ARGB 360 AIO Unit (Radiator, Pump, and Fans pre-assembled)
- Mounting Hardware for Intel LGA 1700/1200/15X/2066 sockets
- Mounting Hardware for AMD AM3/AM4/AM5 sockets
- Thermal Paste (pre-applied on cold plate)
- Thermal Paste Stencil (for reapplication)
- ຄູ່ມືຜູ້ໃຊ້
4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Follow these steps for proper installation of your HyperFlow ARGB 360 AIO cooler. Ensure your system is powered off and unplugged before proceeding.
4.1 ການກວດສອບການຕິດຕັ້ງກ່ອນ
The fans are pre-installed on the radiator, and thermal paste is pre-applied to the cold plate. This simplifies the installation process significantly.
4.2 Mounting the Radiator and Fans
Mount the radiator and fans to an available 360mm mounting location in your PC case (e.g., top, front). Ensure proper airflow direction for optimal cooling.
4.3 Installing the Water Block
Select the appropriate mounting bracket for your CPU socket (Intel LGA 1700/1200/15X/2066 or AMD AM3/AM4/AM5). Secure the water block to your CPU according to the specific instructions for your motherboard and socket type. Ensure even pressure for proper thermal contact.
4.4 ການເຊື່ອມຕໍ່ສາຍ
The cooler features a pre-connected 7-pin short cable for simplified wiring. Connect the 4-pin PWM connector to your motherboard's CPU_FAN header and the 5V3pin ARGB connector to a compatible ARGB header on your motherboard for lighting control.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
Once installed, the MONTECH HyperFlow ARGB 360 operates automatically, regulating pump and fan speeds based on CPU temperature. Ensure your motherboard's BIOS/UEFI settings are configured to allow PWM control for the CPU fan header.
5.1 Fan and Pump Operation
- ປ້ຳນ້ຳ: Operates at a maximum rotational speed of 3100 RPM, ensuring rapid coolant circulation.
- ພັດລົມເຢັນ: Metal Pro 12 ARGB fans operate up to 2200 RPM, providing robust airflow.
- ລະດັບສຽງລົບກວນ: The cooler is designed for quiet operation, with a typical noise level of 28 dB.
5.2 ການຄວບຄຸມແສງ ARGB
The ARGB lighting can be controlled via your motherboard's RGB software (if compatible with 5V3pin ARGB headers) or a dedicated ARGB controller (not included).
6. ບໍາລຸງຮັກສາ
ການບໍາລຸງຮັກສາເປັນປົກກະຕິຮັບປະກັນການປະຕິບັດທີ່ດີທີ່ສຸດແລະອາຍຸຍືນຂອງເຄື່ອງເຮັດຄວາມເຢັນ AIO ຂອງທ່ານ.
- ການກຳຈັດຂີ້ຝຸ່ນ: ເຮັດຄວາມສະອາດຂີ້ຝຸ່ນອອກຈາກຮູ radiator ແລະໃບພັດລົມເປັນໄລຍະໆ ໂດຍໃຊ້ອາກາດອັດແໜ້ນ ຫຼືແປງອ່ອນໆ. ໃຫ້ແນ່ໃຈວ່າພັດລົມບໍ່ຫມຸນໃນລະຫວ່າງການເຮັດຄວາມສະອາດ.
- ການວາງຄວາມຮ້ອນ: The pre-applied thermal paste is designed for long-term use. If you need to remove and re-install the water block, clean off old thermal paste and apply new paste using the provided stencil for even coverage.
- ການກວດກາທໍ່: ກວດກາທໍ່ເປັນບາງຄັ້ງຄາວເພື່ອມີສັນຍານວ່າມີຮອຍແຕກ, ຮົ່ວ ຫຼືເສຍຫາຍ.
7. ການແກ້ໄຂບັນຫາ
ຖ້າທ່ານພົບບັນຫາກັບເຄື່ອງເຮັດຄວາມເຢັນຂອງທ່ານ, ໃຫ້ອ້າງອີງເຖິງຂັ້ນຕອນການແກ້ໄຂບັນຫາທົ່ວໄປຕໍ່ໄປນີ້:
- ອຸນຫະພູມ CPU ສູງ:
- ໃຫ້ແນ່ໃຈວ່າບລັອກນ້ຳຖືກຕິດຕັ້ງຢ່າງປອດໄພ ແລະ ສຳຜັດກັບ CPU ໄດ້ດີ.
- Verify that the pump is running (you may feel a slight vibration or hear a faint hum). Check pump power connection.
- Confirm fans are spinning and airflow is unobstructed.
- Check thermal paste application. Reapply if necessary.
- Fans Not Spinning/ARGB Not Lighting:
- Check all power and ARGB cable connections to the motherboard.
- Ensure appropriate headers are enabled in BIOS/UEFI.
- Test fans/ARGB with different headers or a known working setup if possible.
- ສິ່ງລົບກວນທີ່ຜິດປົກກະຕິ:
- A gurgling sound immediately after installation may indicate air bubbles. This usually resolves itself over time.
- Ensure no cables are interfering with fan blades.
8. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ໝາຍເລກຕົວແບບ | HyperFlow ARGB 360 Black |
| ຂະໜາດສິນຄ້າ | 15.63"L x 4.72"W x 1.06"H (39.7 x 12 x 2.7 cm) |
| ນ້ຳໜັກ | 4.23 ປອນ (1.92 ກິໂລ) |
| ວິທີການເຮັດຄວາມເຢັນ | ນ້ຳເຢັນ |
| ຄວາມໄວປັ໊ມ | ສູງສຸດ 3100 RPM |
| ຄວາມໄວພັດລົມ | Max 2200 RPM (Metal Pro 12 ARGB) |
| ລະດັບສຽງ | 28 dB (ປົກກະຕິ) |
| ປະເພດເຊື່ອມຕໍ່ໄຟຟ້າ | 4-Pin (PWM) |
| ປະເພດຕົວເຊື່ອມຕໍ່ ARGB | 5V3pin |
| ສະບັບtage | 5 ໂວນ |
| ວັດtage | 14.28 ວັດ |
| ອຸປະກອນທີ່ເຂົ້າກັນໄດ້ | ຄອມພິວເຕີເກມ |
| ຄວາມເຂົ້າກັນໄດ້ຂອງຊັອກເກັດ CPU | Intel LGA 1700/1200/15X/2066, AMD AM3/AM4/AM5 |
| ວັດສະດຸຮັງສີ | Aluminum (with 20 FPI fin design) |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
MONTECH provides an industry-leading ຮັບປະກັນ 6 ປີ for the HyperFlow ARGB 360 AIO CPU Liquid Cooler. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact MONTECH customer service through their official webເວັບໄຊທ໌ຫຼືຮ້ານຂາຍຍ່ອຍບ່ອນທີ່ຜະລິດຕະພັນໄດ້ຖືກຊື້.
