RESTMO Water Flow Meter Instruction Manual

1. ຜະລິດຕະພັນເກີນview

The RESTMO Water Flow Meter is designed to accurately measure water consumption and flow rate for various applications, including garden watering, RV tank filling, and more. It features a durable brass inlet and outlet, a 360° rotatable control panel for easy reading, and a clear LCD screen.

Image: Two RESTMO Water Flow Meters, highlighting their compact design and digital displays.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• ການກໍ່ສ້າງທົນທານ: Pure brass inlet and outlet metal threads for enhanced durability and leak-proof performance.
• Rotatable Control Panel: 360° rotatable display for optimal viewມຸມ ing.
• ຈໍ LCD ທີ່ຈະແຈ້ງ: 1.3-inch large LCD screen for easy reading.
• ໂໝດການວັດແທກຫຼາຍຮູບແບບ: Total, Flow, Consumption, and Average modes.
• ຄວາມຖືກຕ້ອງສູງ: Measurement tolerance less than 5%.
• Easy Battery Access: Swivel bar on battery cover for tool-free opening.

Image: Visual representation of the meter's key features, including its rotatable panel, brass components, and display.

2. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Follow these steps to properly install your RESTMO Water Flow Meter:

1. Prepare Connection: Ensure your hose, nozzle, or faucet has a standard 3/4" GHT (Garden Hose Thread) connection.
2. ເຊື່ອມຕໍ່ທາງເຂົ້າ: Screw the brass inlet of the water flow meter onto your water source (e.g., faucet, garden hose). Ensure it is hand-tightened to prevent leaks. The inlet features a filter screen to prevent debris from entering.
3. ເຊື່ອມຕໍ່ຊ່ອງສຽບ: Attach your hose or watering accessory to the brass outlet of the water flow meter. Hand-tighten securely.
4. ປັບຈໍສະແດງຜົນ: Rotate the control panel 360° to find the most convenient viewing angle for the LCD display.

Image: Demonstrating the 360° rotatable control panel for optimal reading position when connected to a hose nozzle.

ຮູບພາບ: ລາຍລະອຽດ view of the 360° swivel brass inlet, highlighting its robust construction and integrated filter.

3. ຄໍາແນະນໍາການດໍາເນີນງານ

The RESTMO Water Flow Meter features a single button for easy navigation through its four measurement modes:

ຮູບພາບ: ຫຼາຍກວ່າview of the four measurement modes and their displays.

• ໂໝດທັງໝົດ: Displays the cumulative total water consumption since the last reset. This mode is ideal for tracking overall water usage over extended periods.
• ໂໝດກະແສ: Shows the real-time water flow rate in Gallons Per Minute (GPM) or Liters Per Minute (LPM). To switch between gallons and liters, long-press the button while in Flow Mode.
• ຮູບແບບການບໍລິໂພກ: Displays the water consumption from the last single watering session. This allows you to see how much water was used in your most recent task.
• Average Mode: Calculates and displays the daily average water usage over the last seven days, starting from the next day after activation.

Press the single button to cycle through these modes. The display will clearly indicate which mode is active.

4. ບໍາລຸງຮັກສາ

ການຕິດຕັ້ງ/ປ່ຽນແບັດເຕີລີ:

The water flow meter uses a CR2032 3V button cell battery. Replace the battery when the low battery symbol appears on the display.

1. Unscrew Cap: Locate the battery compartment cap on the back of the meter. Unscrew the cap in the direction of the "unlock" symbol. The cap has a swivel bar for easy grip.
2. ຕິດຕັ້ງແບດເຕີລີ່: Insert a new CR2032 battery with the positive (+) side facing outwards (towards you).
3. ແບັດເຕີຣີທີ່ປອດໄພ: Ensure the battery is seated correctly. No need to adjust the position of the metal piece inside the battery compartment.
4. Screw Cap: Screw the cap back on in the direction of the "lock" symbol until it is secure.

Image: Step-by-step guide for battery installation.

ການດູແລທົ່ວໄປ:

• Clean the exterior of the meter with a soft, damp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດ.
• While the meter is IPX6 waterproof, avoid submerging it in water.
• Store the meter in a dry place when not in use, especially during freezing temperatures to prevent damage.

5. ການແກ້ໄຂບັນຫາ

If you encounter issues with your RESTMO Water Flow Meter, consider the following:

• ບໍ່ມີຈໍສະແດງຜົນ/Fint Display: Check the battery. Replace it if it's low or depleted. Ensure the battery is inserted with the correct polarity.
• ການອ່ານທີ່ບໍ່ຖືກຕ້ອງ: Ensure the meter is securely connected and there are no leaks at the connections. Verify that the water flow is consistent and not turbulent. The measurement tolerance is less than 5%.
• ການຮົ່ວໄຫຼໃນການເຊື່ອມຕໍ່: Ensure all connections are hand-tightened. Check the rubber washers (gaskets) inside the connections for proper seating and damage. Replace if necessary.
• No Flow Detected: Ensure water is actually flowing through the meter. Check for blockages in the hose or nozzle.

For further assistance, please contact Restmo customer support.

6. ຂໍ້ມູນຈໍາເພາະ

7. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, or any inquiries regarding your RESTMO Water Flow Meter, please refer to the official Restmo webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

Restmo Official Store: Visit the Restmo Store on Amazon