Kanlux LOGI Two-Gang Chandelier Switch with LED (Model 33623) - Instruction Manual

ແນະນຳ

This manual provides detailed instructions for the Kanlux LOGI Two-Gang Chandelier Switch with LED, Model 33623. It covers product features, safety guidelines, installation procedures, operation, maintenance, troubleshooting, and technical specifications. Please read this manual thoroughly before installation and use to ensure safe and efficient operation of the device.

The Kanlux LOGI switch is designed to independently control two separate lighting circuits, making it suitable for managing multiple lamps or chandeliers from a single location. Its integrated LED backlight enhances visibility in dark environments. This product is intended for indoor use and complies with IP20 protection standards, capable of handling a load of 10AX at 250V AC.

ຂໍ້ມູນຄວາມປອດໄພ

ຄຳເຕືອນ: ຄວາມສ່ຽງຕໍ່ການຊ໊ອກໄຟຟ້າ. Always disconnect power at the circuit breaker or fuse box before installing, servicing, or removing the switch. Failure to do so can result in serious injury or death.

• Installation should only be performed by a qualified electrician or trained personnel in accordance with all local and national electrical codes.
• Do not install this device in wet locations or outdoors. It is rated IP20 for indoor use only.
• ຮັບປະກັນ voltage and current ratings of your electrical system are compatible with the switch's specifications (250V AC, 10AX).
• Do not exceed the maximum load rating of the switch.
• Inspect the switch for any damage before installation. Do not install a damaged device.
• ໃຫ້ເດັກນ້ອຍຢູ່ຫ່າງຈາກການຕິດຕັ້ງໄຟຟ້າ.

ສິນຄ້າເກີນview

The Kanlux LOGI Two-Gang Chandelier Switch is designed for reliable control of two independent lighting circuits. Its minimalist design integrates seamlessly into various interior styles.

• Two Levers: Allows independent control of two separate lighting circuits.
• ໂຄມໄຟ LED: Facilitates easy identification and operation of the switch in low-light conditions.
• ການກໍ່ສ້າງທົນທານ: Designed for interior use with an IP20 protection rating.
• ຄວາມເຂົ້າກັນໄດ້ມາດຕະຖານ: Operates at 250V AC with a 10AX current capacity.

ຮູບທີ 1: Technical drawing of the Kanlux LOGI Two-Gang Chandelier Switch. This diagram illustrates the front view of the switch module, indicating its square form factor with dimensions of 71mm by 71mm. The two independent switch levers are visible, along with the Kanlux brand logo and mounting points. This image helps in understanding the physical size and layout for installation planning.

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

ສຳຄັນ: ການຕິດຕັ້ງຕ້ອງໄດ້ປະຕິບັດໂດຍຊ່າງໄຟຟ້າທີ່ມີຄຸນວຸດທິ.

1. ການຕັດການເຊື່ອມຕໍ່ໄຟຟ້າ: Before starting any electrical work, ensure the main power supply to the circuit is turned off at the circuit breaker or fuse box. Verify with a voltage ເຄື່ອງທົດສອບ.
2. ກະກຽມສາຍໄຟ: Carefully strip the insulation from the ends of the electrical wires (live, neutral, and load wires for each circuit) according to local electrical codes and the switch's terminal requirements.
3. ເຊື່ອມຕໍ່ສາຍ:
   • Connect the incoming live wire (L) to the common terminal of the switch.
   • Connect the load wire for the first lighting circuit to the first output terminal (e.g., L1).
   • Connect the load wire for the second lighting circuit to the second output terminal (e.g., L2).
   • ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ທັງຫມົດແມ່ນປອດໄພແລະແຫນ້ນ.
4. ຕິດສະວິດ: Gently push the wired switch module into the wall box. Secure it using the provided screws. Ensure the switch is level and flush with the wall surface.
5. ຕິດແຜ່ນໃບຫນ້າ: Install the decorative faceplate over the switch module.
6. ຟື້ນຟູພະລັງງານ: ເມື່ອການຕິດຕັ້ງສໍາເລັດແລະການເຊື່ອມຕໍ່ທັງຫມົດແມ່ນປອດໄພ, ຟື້ນຟູພະລັງງານຢູ່ທີ່ຕົວຕັດວົງຈອນ.
7. ການ​ປະ​ຕິ​ບັດ​ການ​ທົດ​ສອບ​: Test both switch levers to ensure they correctly control their respective lighting circuits.

ຄໍາແນະນໍາການດໍາເນີນງານ

The Kanlux LOGI Two-Gang Chandelier Switch provides straightforward control for two lighting circuits.

• ເປີດ/ປິດໄຟ: Press the upper or lower part of each switch lever to toggle the connected lighting circuit on or off. Each lever operates independently.
• ໂຄມໄຟ LED: The integrated LED backlight will illuminate when the switch is in the 'off' position (or 'on' depending on wiring configuration and local standards) to help locate it in the dark.

ບໍາລຸງຮັກສາ

The Kanlux LOGI switch requires minimal maintenance.

• ທໍາຄວາມສະອາດ: To clean the switch, first ensure power is disconnected at the circuit breaker. Use a soft, dry cloth to wipe the surface. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
• ການກວດກາ: Periodically check the switch for any signs of damage, loose connections, or unusual operation. If any issues are observed, disconnect power and consult a qualified electrician.

ການແກ້ໄຂບັນຫາ

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact a qualified electrician or Kanlux customer support.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Specific warranty information for the Kanlux LOGI Two-Gang Chandelier Switch (Model 33623) was not provided in the product details. For warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Kanlux webເວັບໄຊ.

For technical support, product inquiries, or assistance with installation, please contact Kanlux customer service or your local distributor. Contact information can typically be found on the manufacturer's webສະຖານທີ່ຫຼືຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນ.

ຜູ້ຜະລິດ: Kanlux