ຄູ່ມືຜູ້ໃຊ້ເຄື່ອງສະຕາດລົດພົກພາ WOLFBOX 3000A

1. ບົດແນະນຳ

Thank you for choosing the WOLFBOX 3000A Portable Car Jump Starter. This device is designed to provide a reliable and powerful solution for starting vehicles with dead batteries, as well as serving as a portable power bank and emergency light source. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your product.

2. ຂໍ້ມູນຄວາມປອດໄພ

WARNING: Read all safety information before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
• Do not immerse the product in water or expose it to rain.
• ຢ່າປະຕິບັດຜະລິດຕະພັນໃນບັນຍາກາດທີ່ລະເບີດ, ເຊັ່ນ: ໃນທີ່ປະທັບຂອງຂອງແຫຼວ, ທາດອາຍຜິດ, ຫຼືຝຸ່ນ.
• ຢ່າໂດດເລີ່ມຕົ້ນຫມໍ້ໄຟທີ່ແຊ່ແຂງ.
• ຮັບປະກັນການເຊື່ອມຕໍ່ polarity ທີ່ເຫມາະສົມ (ສີແດງ clamp ກັບບວກ, cl ສີດໍາamp ລົບ) ເພື່ອຫຼີກລ່ຽງประกายໄຟ ແລະ ຄວາມເສຍຫາຍ.
• ຢ່າເຊື່ອມຕໍ່ cl ບວກແລະລົບamps ຮ່ວມ​ກັນ.
• If the product is damaged, do not use it. Contact customer service for assistance.
• Use only the provided jumper cables and accessories.
• Do not leave the jump starter connected to the vehicle battery after starting the vehicle.

Image: The WOLFBOX 3000A Jump Starter features a 10-Point Safety System, providing comprehensive protection against various electrical hazards during operation.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ຊຸດ​ຂອງ​ທ່ານ​:

• WOLFBOX 3000A Jump Starter (MegaVolt16)
• Smart Jumper Cables with Battery Clamps
• ສາຍສາກໄຟ USB-C ເຖິງ USB-C
• ກະເປົາຖື EVA
• ຄູ່ມືຜູ້ໃຊ້

Image: All components included in the WOLFBOX 3000A Jump Starter package.

4. ຜະລິດຕະພັນເກີນview

Familiarize yourself with the different parts of your WOLFBOX 3000A Jump Starter:

ຮູບພາບ: ທາງຫນ້າ view of the WOLFBOX 3000A Jump Starter.

Image: Integrated Versatility - Key features and ports of the WOLFBOX 3000A Jump Starter.

• ຈໍ LCD: ສະແດງເປີເຊັນແບັດເຕີຣີtage, input/output status, and error messages.
• ປຸ່ມເປີດປິດ: Turns the device on/off and cycles through LED light modes.
• ປຸ່ມເພີ່ມ: Activates boost mode for severely discharged batteries.
• ໄຟສາຍ LED: Provides illumination with multiple modes (lighting, SOS, strobe).
• PD65W USB-C In/Out Port: For charging the jump starter and charging other devices.
• QC3.0 USB-A Port: For charging other electronic devices.
• Jumper Cable Socket: Connects to the smart jumper cables.

5. ການສາກໄຟເຄື່ອງສະຕາດ

Before first use, fully charge the WOLFBOX 3000A Jump Starter. It is recommended to recharge the unit every 3-6 months to maintain optimal battery health, even if not in use.

1. Connect the provided USB-C to USB-C charging cable to the PD65W USB-C In/Out port on the jump starter.
2. Connect the other end of the USB-C cable to a 65W (or higher) USB-C power adapter (not included).
3. The LCD screen will display the charging status and battery percentage. The unit is fully charged when the screen shows 100%.

Note: A 65W fast charger can charge the jump starter to 80% in approximately 30 minutes.

Image: The jump starter's 65W USB-C port can quickly charge the unit itself or other electronic devices.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

6.1. Jump Starting a Vehicle (Normal Mode)

ໃຫ້ແນ່ໃຈວ່າເຄື່ອງສະຕາດມີປະຈຸໄຟຢ່າງໜ້ອຍ 50% ກ່ອນທີ່ຈະພະຍາຍາມສະຕາດລົດ.

1. ປິດສະວິດເຕີຂອງລົດທ່ານ ແລະ ອຸປະກອນເສີມທັງໝົດ (ໄຟໜ້າ, ວິທະຍຸ, ແລະອື່ນໆ).
2. Connect the blue end of the smart jumper cables to the jumper cable socket on the WOLFBOX 3000A Jump Starter. Ensure a firm connection.
3. ຄັດຕິດ ສີແດງ (+) clamp to the positive terminal of your vehicle's battery.
4. ຄັດຕິດ ສີດຳ (-) clamp ໄປຫາຂົ້ວລົບຂອງແບັດເຕີຣີລົດຂອງທ່ານ.
5. Once connected, the jump starter's LCD screen should display "START" with a green light, indicating a correct connection and readiness to start.
6. ເລີ່ມເຄື່ອງຈັກໃນລົດຂອງທ່ານ.
7. Once the vehicle starts, immediately remove the jumper cables in reverse order: first the black (-) clamp, ຫຼັງຈາກນັ້ນສີແດງ (+) clamp, and finally disconnect the blue end from the jump starter.

Image: Normal Start Modes - Step-by-step guide for jump starting a vehicle.

6.2. Jump Starting a Vehicle (Boost Mode)

Use Boost Mode if your vehicle's battery is severely discharged (below 9V) and the jump starter does not automatically display "START" in normal mode.

1. Follow steps 1-4 from the Normal Jump Start procedure (connect clamps to battery and jump starter).
2. If the screen displays "LOW" or does not show "START", press and hold the ປຸ່ມກະຕຸ້ນ on the jump starter for 2-3 seconds until the screen displays "START" with a green light.
3. ສະຕາດເຄື່ອງຈັກຂອງຍານພາຫະນະຂອງທ່ານພາຍໃນ 30 ວິນາທີ.
4. Once the vehicle starts, immediately remove the jumper cables in reverse order: first the black (-) clamp, ຫຼັງຈາກນັ້ນສີແດງ (+) clamp, and finally disconnect the blue end from the jump starter.

Image: Boost Start Modes - Step-by-step guide for jump starting a vehicle with a severely discharged battery.

6.3. ການໃຊ້ໄຟສາຍ LED

The integrated LED flashlight has three modes: constant light, SOS signal, and strobe light.

1. ກົດຄ້າງໄວ້ ປຸ່ມເປີດປິດ for 3 seconds to turn on the flashlight (constant light mode).
2. Press the Power button once to cycle to SOS mode.
3. Press the Power button again to cycle to strobe mode.
4. Press the Power button a third time to turn off the flashlight.

Image: The 200-Lumen LED Flashlight provides illumination and emergency signaling.

6.4. ການໃຊ້ເປັນພາວເວີແບ້ງພົກພາ

The WOLFBOX 3000A can charge various electronic devices via its USB ports.

• Connect your device's charging cable to either the PD65W USB-C Out port or the QC3.0 USB-A port on the jump starter.
• The jump starter will automatically begin charging your device. The LCD screen will indicate "OUT" status.
• ຕັດການເຊື່ອມຕໍ່ອຸປະກອນຂອງທ່ານເມື່ອສາກໄຟສຳເລັດແລ້ວ.

7. ບໍາລຸງຮັກສາ

Proper maintenance ensures the longevity and performance of your jump starter.

• ການເກັບຮັກສາ: ເກັບຮັກສາເຄື່ອງເລີ່ມເຕັ້ນໄວ້ໃນບ່ອນເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະອຸນຫະພູມທີ່ຮ້າຍກາດ.
• ກຳລັງສາກໃໝ່: Recharge the unit every 3-6 months, even if not used, to maintain battery health. A fully charged unit can hold its charge for up to two years under moderate conditions.
• ທໍາຄວາມສະອາດ: Use a dry, soft cloth to clean the exterior of the unit. Do not use harsh chemicals or abrasives.
• ການດູແລສາຍໄຟ: Inspect jumper cables for any damage before each use. Store them neatly in the carrying case.

Image: The WOLFBOX 3000A Jump Starter features a 2-year standby capability, requiring periodic recharging for optimal performance.

8. ການແກ້ໄຂບັນຫາ

Image: The large screen display provides clear status indicators for easy troubleshooting.

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນລູກຄ້າ

WOLFBOX provides a comprehensive warranty and dedicated customer support for your product.

• ໄລຍະເວລາຮັບປະກັນ: 24 ເດືອນນັບຈາກວັນທີຊື້.
• ການຄຸ້ມຄອງ: This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or natural disasters.
• ບໍລິການລູກຄ້າ: For any questions, issues, or warranty claims, please contact WOLFBOX customer service.
• ອີເມວ: service@wolfbox.com
• ໂທລະສັບ: +1 888 296 8399

Please have your purchase receipt and product model number (MegaVolt16) ready when contacting support.