ແນະນຳ
This manual provides essential information for the safe and effective operation of your Blackstar HT-5RH MK III 5-watt guitar tube amp head. Please read thoroughly before use.
ຂໍ້ມູນຄວາມປອດໄພ
ເພື່ອຮັບປະກັນການເຮັດວຽກທີ່ປອດໄພ ແລະປ້ອງກັນຄວາມເສຍຫາຍ, ກະລຸນາປະຕິບັດຕາມຄໍາແນະນໍາດ້ານຄວາມປອດໄພຕໍ່ໄປນີ້:
- ຮັບປະກັນສະເຫມີ amplifier is connected to a grounded power outlet.
- ຫ້າມເປີດເຜີຍ amplifier ກັບຝົນຫຼືຄວາມຊຸ່ມ.
- ຮັບປະກັນການລະບາຍອາກາດທີ່ພຽງພໍອ້ອມຮອບ amplifier to prevent overheating. Do not obstruct ventilation grilles.
- Refer all servicing to qualified service personnel. Risk of electric shock. Do not open the ampຕົວເຄື່ອງ lifier.
- Disconnect the mains power cable before cleaning or servicing.
ຕັ້ງຄ່າ
Follow these steps to set up your HT-5RH MK III ampຫົວຫນ້າ lifier.
Connecting to a Speaker Cabinet
The HT-5RH MK III requires an external speaker cabinet. Ensure the speaker cabinet's impedance matches the ampຜົນຜະລິດຂອງ lifier.
Image: Rear panel of the Blackstar HT-5RH MK III amplifier head, highlighting the speaker output jacks.
- Connect a speaker cable from one of the ຜົນອອກຂອງລຳໂພງ on the rear panel to your speaker cabinet.
- ໄດ້ amplifier ສະເຫນີ 1 x 8 OHM OR 2 x 16 OHM ແລະ 1 x 16 OHM outputs. Match the impedance of your cabinet to the correct output jack.
- Ensure a speaker is connected before powering on the amplifier ເພື່ອປ້ອງກັນຄວາມເສຍຫາຍ.
ການເຊື່ອມຕໍ່ພະລັງງານ
Connect the supplied mains power cable to the ການ ນຳ ເຂົ້າ MAINS on the rear panel and to a suitable power outlet.
Image: Rear panel of the Blackstar HT-5RH MK III amplifier head, showing the mains input.
ການຄວບຄຸມແລະຫນ້າທີ່
The front panel of your HT-5RH MK III features intuitive controls for shaping your tone.
Image: Front panel of the Blackstar HT-5RH MK III amplifier head, displaying all controls.
ການຄວບຄຸມກະດານດ້ານຫນ້າ
- ສະຫວິດໄຟຟ້າ: ສະຫຼັບໄດ້ ampຊີວິດເປີດຫຼືປິດ.
- 5W / 0.5W Switch: Selects between 5-watt and 0.5-watt output power for different volume requirements.
- REVERB Level: Adjusts the amount of built-in reverb effect.
- OD EQUALISATION (ISF, TREBLE, MIDDLE, BASS): Tone stack for the Overdrive channel. The ISF (Infinite Shape Feature) control shifts the tone from a classic British sound (counter-clockwise) to a more aggressive American sound (clockwise).
- OVERDRIVE (VOLUME, GAIN, VOICE, SELECT): Controls for the Overdrive channel. ປະລິມານ adjusts the output level, ໄດ້ຮັບ controls the amount of distortion, ສຽງ selects different overdrive voicings, and ເລືອກ switches between Clean and Overdrive channels.
- CLEAN (VOLUME, VOICE): Controls for the Clean channel. ປະລິມານ adjusts the output level, ສຽງ selects different clean voicings.
- ການປ້ອນຂໍ້ມູນ: ຊ່ອງສຽບຂະໜາດ 1/4" ສຳລັບເຊື່ອມຕໍ່ກີຕ້າຂອງທ່ານ.
ການເຊື່ອມຕໍ່ແຜງດ້ານຫລັງ
Image: Rear panel of the Blackstar HT-5RH MK III amplifier head, displaying all connections.
- ສຽງ USB: Connects to a computer for direct recording.
- SEND/RETURN (Effects Loop): For connecting external effects pedals. The ລະດັບ switch adjusts the effects loop sensitivity (+4dBu/-10dBV).
- ຕີນສະວິດ: Connects an optional footswitch for channel switching.
- ເຂົ້າໃນ: 3.5mm input for connecting external audio sources like MP3 players.
- CABRIG OUTPUT (LINE OUT / PHONES): Emulated output for direct recording or headphones, with selectable cabinet simulations.
- ອຸປະກອນເວົ້າອອກສຽງ: Connects to external speaker cabinets (1x8 Ohm or 2x16 Ohm, 1x16 Ohm).
- ວັດສະດຸປ້ອນຫຼັກ: ການເຊື່ອມຕໍ່ສາຍໄຟ.
ຄໍາແນະນໍາການດໍາເນີນງານ
ການດໍາເນີນງານພື້ນຖານ
- ຮັບປະກັນ amplifier is connected to a suitable speaker cabinet and power supply.
- ເຊື່ອມຕໍ່ guitar ຂອງທ່ານກັບ ປ້ອນຂໍ້ມູນ jack.
- ຫັນ ພະລັງງານ ສະຫຼັບໄປ ON. Allow a few moments for the tubes to warm up.
- Select your desired power output using the 5W / 0.5W ສະຫຼັບ.
- ໃຊ້ ສະອາດ channel controls (ປະລິມານ, ສຽງ) ຫຼື ຫຼາຍເກີນໄປ channel controls (ປະລິມານ, ໄດ້ຮັບ, ສຽງ, ເລືອກ) to achieve your desired tone.
Using the Effects Loop
The effects loop allows you to integrate external effects pedals into your signal chain.
- ເຊື່ອມຕໍ່ ສົ່ງ jack to the input of your effects pedal.
- Connect the output of your effects pedal to the ກັບຄືນ jack.
- ປັບ ລະດັບ switch (+4dBu for rack effects, -10dBV for stompboxes) to match your pedal's output.
ການບັນທຶກສຽງ ແລະ ການຝຶກຊ້ອມແບບງຽບໆ
- ສຽງ USB: ເຊື່ອມຕໍ່ສາຍ USB ຈາກ amplifier to your computer. The amplifier will appear as an audio interface, allowing direct recording.
- CABRIG Output: ສໍາລັບການປະຕິບັດແບບງຽບ, ເຊື່ອມຕໍ່ຫູຟັງໃສ່ກັບ CABRIG OUTPUT. This output also provides emulated cabinet tones for direct recording to a mixer or audio interface.
- MP3/Line Input: Connect an external audio device (e.g., MP3 player, phone) to the ເສັ້ນເຂົ້າ jack to play along with backing tracks.
ການຫຼຸດຜ່ອນພະລັງງານ
ໄດ້ 5W / 0.5W switch allows you to reduce the amplifier's output power, making it suitable for lower volume practice or recording while retaining tube tone.
ບໍາລຸງຮັກສາ
- ຮັກສາ amplifier clean by wiping with a dry, soft cloth.
- ຫຼີກເວັ້ນການເປີດເຜີຍ amplifier ກັບອຸນຫະພູມສູງສຸດຫຼືຄວາມຊຸ່ມຊື່ນ.
- ກວດສອບການເຊື່ອມຕໍ່ສາຍໄຟທັງໝົດເປັນປະຈຳເພື່ອຄວາມແໜ້ນໜາ.
- Tube replacement should be performed by qualified service personnel.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ບໍ່ມີສຽງ | Power not on, speaker not connected, guitar cable faulty, volume low. | Check power switch, ensure speaker is connected, test guitar cable, increase volume controls. |
| ສຽງອ່ອນ ຫຼືບິດເບືອນ | Faulty tubes, incorrect impedance match, effects loop issue. | Consult qualified technician for tube check, verify speaker impedance, bypass effects loop to test. |
| Hum ຫຼື Noise | Ground loop, faulty cables, proximity to interference. | Try different power outlets, use shielded cables, move away from electronic devices. |
ຂໍ້ມູນຈໍາເພາະ
- ຕົວແບບ: HT5RHMK3
- ຜົນຜະລິດວັດtage: 5 ວັດ RMS
- ທໍ່: 12BH7 (Power Amp)
- ຊ່ອງ: 2 (ສະອາດ, ໂອເວີໄດຣຟ໌)
- ການຄວບຄຸມ: Power, 5W/0.5W Switch, Reverb Level, ISF, Treble, Middle, Bass, Overdrive Volume, Gain, Voice, Select, Clean Volume, Voice.
- ວັດສະດຸປ້ອນ: Guitar Input, MP3/Line Input.
- ຜົນໄດ້ຮັບ: USB Audio, Effects Loop (Send/Return with Level), Footswitch, CabRig Output (Line Out/Headphones), Speaker Outputs (1x8 Ohm or 2x16 Ohm, 1x16 Ohm).
- ຂະໜາດ: 12.36 x 10.2 x 22.32 ນິ້ວ
- ນ້ໍາຫນັກລາຍການ: 19.94 ປອນ
- ແຫຼ່ງພະລັງງານ: ໄຟຟ້າສາຍ
- ວັດສະດຸ: ສະແຕນເລດ
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
ສຳລັບຂໍ້ມູນການຮັບປະກັນ ແລະ ການຊ່ວຍເຫຼືອດ້ານເຕັກນິກ, ກະລຸນາອ້າງອີງເຖິງ Blackstar ຢ່າງເປັນທາງການ Ampການຈົດທະບຽນ website or contact your local dealer. Keep your proof of purchase for any warranty claims.
ວິດີໂອຜະລິດຕະພັນ
ກີຕ້າ Blackstar HT-5 Amplifier Sound Review
Video: A sound review of the Blackstar HT-5 Guitar Amplifier, demonstrating its tonal capabilities.
OriPure 15W Tube Guitar Amplifier Head OA-H15 (Seller Video)
Video: A demonstration of the OriPure 15W Tube Guitar Amplifier Head OA-H15, showcasing its features and sound. Note: This is a seller-provided video for a related product.
