Svetaecho Wireless Controller Instruction Manual

ແນະນຳ

This manual provides detailed instructions for the Svetaecho Wireless Controller. This controller is designed for use with Nintendo Switch, Switch Lite, Switch OLED, Windows PC (wired connection), iOS, and Android devices. Please read this manual thoroughly before use to ensure proper operation and to maximize your gaming experience.

ໝາຍເຫດ: This controller does not support Xbox games.

ຄຸນສົມບັດຜະລິດຕະພັນ

• Customizable Macro Buttons: Two back buttons (ML/MR) can be programmed to map 1-20 combined functions from A/B/X/Y/L/ZL/R/ZR/L3/R3/D-pad for enhanced gameplay. Double-click SR/SL to temporarily enable/disable macro functions.
• ຟັງຊັນ Turbo ທີ່ສາມາດປັບໄດ້: Supports both Auto and Manual Turbo modes with three adjustable speeds: 5 shots/s, 12 shots/s, and 20 shots/s.
• ມໍເຕີ vibration ສອງ: Built-in motors provide 3-level vibration feedback (None, Weak, Strong) for Switch and Windows PC games. Adjust intensity by pressing and holding L, R, ZL, ZR simultaneously.
• ເຊັນເຊີ 6-Axis Gyro: High-sensitivity gyro sensors offer precise motion control for Nintendo Switch games.
• One-Key Wake-Up (Switch Only): After initial connection, press the HOME button to wake up and reconnect the Switch console.
• ແບັດເຕີຣີຄວາມຈຸສູງ: Integrated 1000mAh battery provides over 16 hours of playtime in LED lit mode. Fully charges in approximately 3 hours via USB Type-C.
• ໂໝດນອນອັດຕະໂນມັດ: The controller automatically shuts down after 20 minutes of inactivity in a connected state. Press the HOME button to wake and reconnect.

ເນື້ອໃນຊຸດ

• 1x Svetaecho Wireless Controller
• 1x ສາຍສາກ USB Type-C
• 1x ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

ຮູບແບບຕົວຄວບຄຸມ

ຮູບພາບ: ດ້ານໜ້າ view of the Svetaecho Wireless Controller, highlighting the main buttons, joysticks, D-pad, and the M1/M2 back buttons.

The controller features standard gaming buttons including A, B, X, Y, L, R, ZL, ZR, D-pad, Left and Right Analog Sticks, HOME button, SHARE button, TURBO button, and two programmable back buttons (M1/ML and M2/MR).

ຮູບພາບ: ຫລັງ view of the Svetaecho Wireless Controller, showing the SR, SL, and M buttons, along with the ML and MR programmable back buttons.

ການຕັ້ງຄ່າແລະການຈັບຄູ່

1. Nintendo Switch Pairing

1. ຈາກເມນູ Switch HOME, ເລືອກ 'Controllers' > 'Change Grip/Order'.
2. Press and hold the HOME button on the Svetaecho controller for 3-5 seconds until the LED indicators begin to flash rapidly.
3. Once connected, the corresponding player LED(s) on the controller will light up solid.
4. To wake up the Switch console after the first connection, simply press the HOME button on the controller.

2. PC (Wired Connection)

1. Connect the controller to your Windows PC using the provided USB Type-C cable.
2. The controller will be automatically recognized as a wired gamepad.
3. Vibration function is supported on Windows PC.

3. iOS/Android Pairing (Wireless)

ຮູບພາບ: The Svetaecho Wireless Controller shown alongside various compatible devices including Nintendo Switch, PC, iOS, and Android phones/tablets.

1. ໃຫ້ແນ່ໃຈວ່າ Bluetooth ຖືກເປີດໃຊ້ງານຢູ່ໃນອຸປະກອນ iOS ຫຼື Android ຂອງທ່ານ.
2. Press and hold the HOME button on the controller for 3-5 seconds until the LED indicators flash rapidly.
3. On your device, search for Bluetooth devices and select the controller (e.g., 'Pro Controller' or similar).
4. Once paired, the LED indicators will become solid.

ຄໍາແນະນໍາການດໍາເນີນງານ

1. Custom Macro Buttons (ML/MR)

• ການຂຽນໂປຣແກຣມ: Press and hold the 'M' button, then press the ML or MR button you wish to program. The LED will flash. Now, press the sequence of buttons (up to 20) you want to assign. Press ML or MR again to save the macro.
• ການໃຊ້ມາໂຄຣ: Simply press the programmed ML or MR button to execute the assigned sequence.
• Enable/Disable Macro: Double-click the SR or SL button to temporarily enable or disable the macro function.

2. ຟັງຊັນ Turbo

ຮູບພາບ: The Svetaecho Wireless Controller illustrating the three adjustable Turbo speeds: 5 shots/s, 12 shots/s, and 20 shots/s.

• Turbo ຄູ່​ມື​: Press and hold the TURBO button, then press the desired action button (A/B/X/Y/L/R/ZL/ZR) to enable Turbo for that button. Release TURBO. Now, holding the action button will trigger rapid presses.
• Auto Turbo: Press and hold the TURBO button, then double-press the desired action button. Release TURBO. The action button will now continuously trigger rapid presses without being held down.
• ການ​ປັບ​ຄວາມ​ໄວ Turbo​: With Turbo enabled for a button, press and hold the TURBO button, then move the Right Analog Stick Up or Down to cycle through the three speeds (5, 12, 20 shots/s).
• Clearing Turbo: To clear Turbo for a single button, press and hold TURBO, then press the action button twice. To clear all Turbo settings, press and hold the TURBO button for 5 seconds.

3. Vibration Adjustment (Switch/PC Only)

ຮູບພາບ: The Svetaecho Wireless Controller highlighting its 6-axis gyro sensor for precise motion control and dual motor vibration with adjustable intensity levels (None, Weak, Strong).

To cycle through vibration intensities (None, Weak, Strong), press and hold the L, R, ZL, and ZR buttons simultaneously.

4. Motion Control (Switch Only)

The built-in 6-axis gyro sensor provides motion control capabilities for compatible Nintendo Switch games. No special setup is required; the feature activates automatically when supported by the game.

5. LED Lighting Modes

The controller features multi-RGB lighting. Specific instructions for changing LED modes are typically found in the quick start guide or by pressing a dedicated button (often indicated by a lightbulb icon) on the controller. Refer to the quick start guide for detailed steps on adjusting LED patterns and colors.

ແບັດເຕີຣີ & ການສາກ

ຮູບພາບ: ລະເບີດຂຶ້ນ view of the Svetaecho Wireless Controller showing the internal 1000mAh battery and the USB Type-C charging port with cable.

• ຕົວຄວບຄຸມແມ່ນອຸປະກອນທີ່ມີຫມໍ້ໄຟ rechargeable 1000mAh.
• Connect the controller to a USB power source (e.g., Switch dock, PC, USB wall adapter) using the provided USB Type-C cable to charge.
• ເວລາສາກໄຟແມ່ນປະມານ 3 ຊົ່ວໂມງສຳລັບການສາກເຕັມ.
• A full charge provides over 16 hours of playtime with LED lighting active.
• The LED indicators will show charging status and turn off or change color when fully charged.

ບໍາລຸງຮັກສາ

• Keep the controller dry and away from extreme temperatures.
• ເຮັດຄວາມສະອາດເຄື່ອງຄວບຄຸມດ້ວຍຜ້າອ່ອນໆ, ແຫ້ງ. ຫຼີກເວັ້ນການນໍາໃຊ້ສານເຄມີທີ່ຮຸນແຮງຫຼືວັດສະດຸຂັດ.
• ຢ່າພະຍາຍາມຖອດເຄື່ອງຄວບຄຸມ, ເພາະວ່ານີ້ອາດຈະເຮັດໃຫ້ການຮັບປະກັນແລະຄວາມເສຍຫາຍ.
• ເກັບຮັກສາຕົວຄວບຄຸມໄວ້ໃນບ່ອນທີ່ປອດໄພເມື່ອບໍ່ໄດ້ໃຊ້ງານເພື່ອປ້ອງກັນຄວາມເສຍຫາຍຈາກອຸບັດຕິເຫດ.

ການແກ້ໄຂບັນຫາ

• ຕົວຄວບຄຸມບໍ່ໄດ້ເຊື່ອມຕໍ່: Ensure the controller is charged. Re-attempt the pairing process. For Switch, ensure 'Pro Controller Wired Communication' is enabled in system settings if using wired mode.
• ການຊັກຊ້າຂອງອິນພຸດ ຫຼື ການຕັດການເຊື່ອມຕໍ່: Ensure there are no strong wireless interferences nearby. Move closer to the console/device. Ensure the controller battery is not low.
• ປຸ່ມບໍ່ຕອບສະໜອງ: Check if the macro function is temporarily disabled (double-click SR/SL). If the issue persists, try resetting the controller (a small reset button may be located on the back, often requiring a pin to press).
• ການສັ່ນສະເທືອນບໍ່ເຮັດວຽກ: Ensure the vibration intensity is not set to 'None'. Check game settings for vibration support.
• ຄວບຄຸມບໍ່ໄດ້ສາກໄຟ: Ensure the USB-C cable is securely connected to both the controller and the power source. Try a different USB port or cable.

Firmware Update for Switch 2

ຮູບພາບ: A step-by-step guide demonstrating how to update the controller's firmware for Switch 2 compatibility using the 'KeyLinker' mobile application.

ໝາຍເຫດ: All functions are supported except "One Press Home key to Wake up the Switch 2 console" and "Open voice menu" after the update.

1. ຂັ້ນຕອນທີ 1: ຊອກຫາ the "KeyLinker" app in your mobile app store, then download and install it.
2. ຂັ້ນຕອນທີ 2: Turn on Bluetooth on your phone and pair the controller with your phone. (Refer to the pairing method in this manual).
3. ຂັ້ນຕອນທີ 3: Open the "KeyLinker" app.
4. ຂັ້ນຕອນທີ 4: In the app, search for the Bluetooth name "NC100" and tap to pair. (If the controller's Bluetooth name does not appear on the screen, press and hold the screen, then pull down to refresh several times.)
5. ຂັ້ນຕອນທີ 5: Tap the three dots in the top right corner, then select "Update device".
6. ຂັ້ນຕອນທີ 6: Enter the upgrade interface, tap "Update Now" at the bottom of the screen, and confirm. (If the update button doesn't appear, please wait a few minutes.)
7. ຂັ້ນຕອນທີ 7: Wait for the update to complete. (If the upgrade fails, please try several more times.)

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນ & ສະຫນັບສະຫນູນ

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Svetaecho webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.