ELECTROPRIME 8V Rechargeable Wireless Grinder Kit User Manual

1. ບົດແນະນຳ

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your ELECTROPRIME 8V LED Digital Display Rechargeable Wireless Grinder Kit. Please read this manual thoroughly before using the product and retain it for future reference.

The ELECTROPRIME wireless grinder is a versatile tool featuring a six-speed transmission, an integrated heat dissipation system, and an automatic lock shaft design for convenient accessory changes. It is powered by an 8V permanent magnet motor and a 1000mAh lithium battery, offering portability and precision for various tasks.

2. ຄໍາແນະນໍາຄວາມປອດໄພທີ່ສໍາຄັນ

ຄຳເຕືອນ: ອ່ານຄຳເຕືອນຄວາມປອດໄພທັງໝົດ, ຄຳແນະນຳ, ຮູບປະກອບ, ແລະຂໍ້ສະເພາະທີ່ສະໜອງໃຫ້ກັບເຄື່ອງມືໄຟຟ້ານີ້. ການບໍ່ປະຕິບັດຕາມຄໍາແນະນໍາທັງຫມົດທີ່ລະບຸໄວ້ຂ້າງລຸ່ມນີ້ອາດຈະເຮັດໃຫ້ໄຟຟ້າຊ໊ອກ, ໄຟໄຫມ້, ແລະ / ຫຼືການບາດເຈັບທີ່ຮ້າຍແຮງ.

• Always wear appropriate personal protective equipment, including safety glasses, gloves, and a dust mask, when operating the grinder.
• ໃຫ້ແນ່ໃຈວ່າ workpiece ໄດ້ຢ່າງປອດໄພ clamped ກ່ອນທີ່ຈະເລີ່ມຕົ້ນການດໍາເນີນງານໃດໆ.
• ຮັກສາພື້ນທີ່ເຮັດວຽກໃຫ້ສະອາດ ແລະ ມີແສງສະຫວ່າງດີ. ພື້ນທີ່ວຸ້ນວາຍ ຫຼືບ່ອນມືດພາໃຫ້ເກີດອຸປະຕິເຫດ.
• ຫ້າມໃຊ້ເຄື່ອງມືໄຟຟ້າໃນບັນຍາກາດທີ່ລະເບີດ, ເຊັ່ນໃນທີ່ປະທັບຂອງຂອງແຫຼວ, ອາຍແກັສ, ຫຼືຂີ້ຝຸ່ນ.
• ຮັກສາເດັກນ້ອຍ ແລະຜູ້ຢືນຢູ່ຫ່າງໆ ໃນຂະນະທີ່ໃຊ້ເຄື່ອງມືໄຟຟ້າ. ສິ່ງລົບກວນສາມາດເຮັດໃຫ້ເຈົ້າສູນເສຍການຄວບຄຸມ.
• ຫຼີກເວັ້ນການເລີ່ມຕົ້ນໂດຍບັງເອີນ. ກວດໃຫ້ແນ່ໃຈວ່າສະວິດຢູ່ໃນບ່ອນປິດກ່ອນທີ່ຈະເຊື່ອມຕໍ່ກັບຊຸດຫມໍ້ໄຟ, ເອົາຫຼືເອົາເຄື່ອງມື.
• ໃຊ້ອຸປະກອນເສີມທີ່ຖືກຕ້ອງສໍາລັບແອັບພລິເຄຊັນ. ຢ່າບັງຄັບເຄື່ອງມື.
• ຖອດຊຸດຫມໍ້ໄຟຈາກເຄື່ອງມືກ່ອນທີ່ຈະເຮັດການປັບ, ປ່ຽນອຸປະກອນເສີມ, ຫຼືເກັບຮັກສາເຄື່ອງມືພະລັງງານ.
• ເກັບຮັກສາເຄື່ອງໃຊ້ໄຟຟ້າທີ່ບໍ່ໄດ້ໃຊ້ໄວ້ໃຫ້ໄກຈາກມືຂອງເດັກນ້ອຍ ແລະບໍ່ໃຫ້ບຸກຄົນທີ່ບໍ່ຄຸ້ນເຄີຍກັບເຄື່ອງມືໄຟຟ້າ ຫຼືຄໍາແນະນໍາເຫຼົ່ານີ້ເພື່ອໃຊ້ເຄື່ອງມືໄຟຟ້າ.
• ຮັກສາເຄື່ອງມືໄຟຟ້າ ແລະອຸປະກອນເສີມ. ກວດເບິ່ງຄວາມຜິດປົກກະຕິຫຼືການຜູກມັດຂອງຊິ້ນສ່ວນເຄື່ອນທີ່, ການແຕກຫັກຂອງຊິ້ນສ່ວນ, ແລະເງື່ອນໄຂອື່ນໆທີ່ອາດຈະສົ່ງຜົນກະທົບຕໍ່ການເຮັດວຽກຂອງເຄື່ອງມືໄຟຟ້າ.
• ໃຊ້ເຄື່ອງມືພະລັງງານ, ອຸປະກອນເສີມ, ແລະບິດເຄື່ອງມືຕາມຄໍາແນະນໍາເຫຼົ່ານີ້, ໂດຍຄໍານຶງເຖິງສະພາບການເຮັດວຽກແລະວຽກງານທີ່ຈະປະຕິບັດ.

3. ເນື້ອໃນຊຸດ

ພາຍຫຼັງການຫຸ້ມຫໍ່, ກະລຸນາກວດສອບວ່າລາຍການທັງໝົດທີ່ລະບຸໄວ້ຂ້າງລຸ່ມນີ້ແມ່ນຢູ່ ແລະບໍ່ມີຄວາມເສຍຫາຍ:

• 1 x ELECTROPRIME 8V Rechargeable Wireless Grinder
• 1 x ສາຍສາກ
• 52 x Assorted Accessories (e.g., grinding bits, polishing pads, cutting discs)
• 1 x ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

If any items are missing or damaged, please contact ELECTROPRIME customer support immediately.

4. ຜະລິດຕະພັນເກີນview

Familiarize yourself with the components of your wireless grinder:

ຮູບທີ 1: Product Dimensions. The grinder measures approximately 194mm (7.64 inches) in length and 36mm (1.42 inches) in width, indicating its compact and ergonomic design.

• ຈໍສະແດງຜົນ LED ດິຈິຕອລ: Shows current speed setting and battery status.
• ປຸ່ມຄວບຄຸມຄວາມໄວ: ປັບລະຫວ່າງ 6 ການຕັ້ງຄ່າຄວາມໄວ.
• ປຸ່ມເປີດປິດ: Turns the grinder on and off.
• ຕາຂ່າຍລະບາຍອາກາດ: Part of the integrated heat dissipation system.
• ຄັກ: Holds various accessories. Features an automatic lock shaft for easy changes.

ຮູບທີ 2: Automatic Lock Shaft Design. This feature simplifies the process of changing grinding accessories, ensuring a secure fit with the 304 spindle, alloy sandwich, and alloy nut.

5. ຕັ້ງຄ່າ

5.1. ການສາກໄຟເບື້ອງຕົ້ນ

Before first use, fully charge the grinder's built-in 1000mAh lithium battery. Connect the charging cable to the grinder's charging port and plug the other end into a suitable power source. The LED digital display will indicate the charging status. Charging typically takes approximately 40 minutes for a full charge, providing up to 40 minutes of working time depending on the load.

5.2. ການຕິດອຸປະກອນເສີມ

1. Ensure the grinder is turned off.
2. Press and hold the automatic lock shaft button (if present, otherwise twist the chuck to engage lock).
3. ຄາຍນັອດຂອງຫົວຈັບໂດຍການໝຸນມັນທວນກັບເຂັມໂມງ.
4. Insert the desired accessory (with a shank diameter of 2.3mm or 3.3mm) into the chuck.
5. Tighten the chuck nut securely by rotating it clockwise. Release the lock shaft button.
6. Gently pull on the accessory to ensure it is firmly seated before operation.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

6.1. ເປີດ / ປິດພະລັງງານ

To turn the grinder on, press the Power Button. The LED digital display will illuminate, showing the current speed setting and battery level. To turn off, press the Power Button again.

6.2. ປັບຄວາມໄວ

The grinder features a six-speed transmission, allowing for precise control over various applications. Press the Speed Control Button to cycle through the available speed settings, ranging from 5000 to 30000 revolutions per minute (r/min). The selected speed will be displayed on the LED screen.

• ຄວາມໄວຕ່ໍາ (1-2): Ideal for polishing, delicate work, or when less material removal is desired.
• ຄວາມໄວປານກາງ (3-4): Suitable for general grinding, sanding, and carving tasks.
• Higher Speeds (5-6): Best for heavy-duty grinding, cutting, and rapid material removal.

6.3. Working with the Grinder

Always start with a lower speed setting and gradually increase it as needed for the task. Apply light, consistent pressure. Allow the tool to do the work. The integrated fan blade heat dissipation system helps maintain optimal operating temperature during extended use.

7. ບໍາລຸງຮັກສາ

7.1. ທໍາຄວາມສະອາດ

After each use, ensure the grinder is turned off and disconnected from any charging source. Use a soft, dry cloth to wipe down the exterior of the tool. Use a small brush or compressed air to clear dust and debris from the ventilation grilles and chuck area. Do not use harsh chemicals or abrasive cleaners.

7.2. ການເກັບຮັກສາ

Store the grinder and its accessories in a clean, dry place, away from direct sunlight, moisture, and extreme temperatures. Keep it out of reach of children. If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.

7.3. ການດູແລຫມໍ້ໄຟ

To maximize battery life, avoid fully discharging the battery frequently. Recharge the battery when the LED display indicates low power. Do not expose the battery to fire or high temperatures.

8. ການແກ້ໄຂບັນຫາ

If you encounter issues with your ELECTROPRIME wireless grinder, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact ELECTROPRIME customer support.

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ELECTROPRIME products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official ELECTROPRIME webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact ELECTROPRIME customer service through the contact information provided on your product packaging or the official webເວັບໄຊ.

When contacting support, please have your product model number (TBD0601603101A) and purchase date readily available.