Karlsson Spry Square LED Alarm Clock Instruction Manual

1. ຜະລິດຕະພັນເກີນview

The Karlsson Spry Square LED Alarm Clock (Model KA5982GY) is a compact digital alarm clock designed for clear time display and reliable alarm functionality. This manual provides detailed instructions for its setup, operation, and maintenance.

ຮູບ 1: ດ້ານຫນ້າ view of the Karlsson Spry Square LED Alarm Clock, showing the time display.

2. ເນື້ອໃນຊຸດ

• Karlsson Spry Square LED Alarm Clock (Model KA5982GY)
• ສາຍໄຟ USB (DC 5V)
• ຄູ່ມືການສອນ

Note: Batteries (if required for backup) and a USB power adapter are typically not included and must be purchased separately.

3. ຕັ້ງຄ່າ

3.1 ການເປີດອຸປະກອນ

The alarm clock can be powered via a DC 5V USB connection or by batteries for backup. For continuous operation, it is recommended to use the USB power cable.

1. ເຊື່ອມຕໍ່ພະລັງງານ USB: Insert the small end of the provided USB cable into the DC 5V port on the back of the alarm clock. Connect the larger end to a USB power adapter (not included) or a powered USB port.
2. Install Batteries (Optional Backup): Open the battery compartment cover on the back of the clock. Insert the appropriate batteries (e.g., AAA, type not specified, refer to compartment markings) ensuring correct polarity (+/-). Close the cover securely. Batteries provide backup power in case of a power outage, preserving time settings.

ຮູບ 2: ກັບຄືນໄປບ່ອນ view of the alarm clock, highlighting the DC 5V input, battery compartment, and control buttons (SET, UP, DOWN, RST).

3.2 ການຕັ້ງເວລາເບື້ອງຕົ້ນ

Upon first power-up or after a full power reset, the display may show a default time or flash. Follow these steps to set the current time:

1. ກົດຄ້າງໄວ້ SET button on the back of the clock until the hour digits begin to flash.
2. ໃຊ້ UP ແລະ ລົງ ປຸ່ມເພື່ອປັບຊົ່ວໂມງ.
3. ກົດ SET button again to confirm the hour and move to the minute setting. The minute digits will flash.
4. ໃຊ້ UP ແລະ ລົງ ປຸ່ມເພື່ອປັບນາທີ.
5. ກົດ SET ກົດປຸ່ມອີກຄັ້ງໜຶ່ງເພື່ອຢືນຢັນນາທີ ແລະອອກຈາກໂໝດການຕັ້ງຄ່າເວລາ.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

4.1 ການຕັ້ງໂມງປຸກ

ເພື່ອຕັ້ງໂມງປຸກ:

1. ຈາກການສະແດງເວລາປົກກະຕິ, ກົດປຸ່ມ SET button once (do not hold). The display will show the current alarm time or 'OFF'.
2. While the alarm time is displayed, press and hold the SET ກົດປຸ່ມຈົນກ່ວາຕົວເລກຊົ່ວໂມງປຸກກະພິບ.
3. ໃຊ້ UP ແລະ ລົງ ປຸ່ມເພື່ອປັບໂມງປຸກ.
4. ກົດ SET again to confirm the alarm hour and move to the alarm minute setting.
5. ໃຊ້ UP ແລະ ລົງ ປຸ່ມເພື່ອປັບນາທີປຸກ.
6. ກົດ SET one more time to confirm the alarm minutes and activate the alarm. An alarm indicator (e.g., a small bell icon or dot) should appear on the display.

4.2 Turning the Alarm On/Off

To toggle the alarm on or off without changing the set time:

1. ຈາກການສະແດງເວລາປົກກະຕິ, ກົດປຸ່ມ SET button once to show the alarm time.
2. ໃນຂະນະທີ່ເວລາປຸກຖືກສະແດງ, ກົດປຸ່ມ UP or ລົງ button to toggle the alarm function on or off. The alarm indicator will appear or disappear accordingly.

4.3 Snooze ຟັງຊັນ

When the alarm sounds, press any button (other than RST or the main power button if present) to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typical snooze duration is 5-9 minutes, specific duration not provided). The snooze indicator may flash on the display.

4.4 ການຢຸດສັນຍານເຕືອນໄພ

To stop the alarm completely when it is sounding, press the RST button or unplug the power. The alarm will reset for the next day at the set time.

5. ບໍາລຸງຮັກສາ

5.1 ການທໍາຄວາມສະອາດ

To maintain the appearance of your alarm clock:

• ເຊັດພື້ນຜິວດ້ວຍຜ້າອ່ອນໆ, ແຫ້ງ.
• ສໍາລັບຮອຍແຂງ, ເບົາບາງ dampລ້າງຜ້າດ້ວຍນໍ້າ. ຫຼີກລ່ຽງການໃຊ້ນໍ້າຢາທໍາຄວາມສະອາດທີ່ມີສີຂັດ, ຕົວລະລາຍ, ຫຼື ສະເປຣສານເຄມີ, ເພາະວ່າສິ່ງເຫຼົ່ານີ້ສາມາດທໍາລາຍສີໄດ້.
• Ensure no liquid enters the device through openings.

5.2 ການທົດແທນຫມໍ້ໄຟ

If using batteries for backup, replace them when the display becomes dim or if the clock loses time during power outages. Refer to section 3.1 for battery installation instructions.

6. ການແກ້ໄຂບັນຫາ

• ຈໍສະແດງຜົນຫວ່າງເປົ່າ ຫຼືມືດ:
  - Ensure the USB power cable is securely connected to both the clock and a working power source.
  - If using batteries, check if they are correctly installed and not depleted. Replace if necessary.
• Clock loses time:
  - If powered by USB, ensure a stable power supply.
  - If relying on battery backup, replace the batteries.
• ໂມງປຸກບໍ່ມີສຽງ:
  - Verify that the alarm is set and activated (check for the alarm indicator on the display). Refer to section 4.1 and 4.2.
  - Ensure the volume is not set to zero (if applicable, though this model typically has a fixed alarm sound).
• ປຸ່ມບໍ່ຕອບສະໜອງ:
  - Try pressing the RST button on the back with a thin object (like a paperclip) to perform a soft reset. This may clear temporary issues without losing settings if backup batteries are present.
  - Disconnect and reconnect the power supply.

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Warranty information for the Karlsson Spry Square LED Alarm Clock is typically provided at the point of purchase or included with the product packaging. Please retain your proof of purchase for warranty claims.

For technical support, service, or further inquiries, please contact Karlsson customer service directly through their official webເວັບໄຊ ຫຼືຮ້ານຄ້າປີກຈາກຜູ້ທີ່ຊື້ສິນຄ້າ.