ຄູ່ມືຜູ້ໃຊ້ ZEBRONICS ROBUST Gaming Chassis

1. ບົດແນະນຳ

This manual provides detailed instructions for the installation, operation, and maintenance of your ZEBRONICS ROBUST Premium Gaming Chassis. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance. Keep this manual for future reference.

ຮູບພາບ 1.1: ດ້ານຫນ້າ view of the ZEBRONICS ROBUST Gaming Chassis, showcasing its tempered glass panels and illuminated interior fans.

2. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

The ZEBRONICS ROBUST chassis is designed to provide a robust and aesthetically pleasing enclosure for your gaming PC components. Key features include:

• Glass-Finish Outlook: Front and side panels are constructed from tempered glass, offering a clear view of internal components and enhancing the chassis's visual appeal.
• ຄວາມເຂົ້າກັນໄດ້ຂອງເມນບອດ: Supports mATX (Micro-ATX) and Mini ITX motherboard form factors.
• ການລະບາຍອາກາດທີ່ມີປະສິດທິພາບ: Equipped with three pre-installed 120mm multicolor LED ring fans (two at the top, one at the rear) to ensure effective cooling and airflow.

Image 2.1: Illustration highlighting the three pre-installed 120mm multicolor LED ring fans for cooling.

• ການເຊື່ອມຕໍ່ຫຼາຍອັນ: Front panel includes one USB 3.0 port, two USB 2.0 ports, and separate microphone and headphone jacks for convenient peripheral access.
• ຊ່ອງຂະຫຍາຍ: Features four expansion slots at the rear for installing add-on cards such as graphics cards or sound cards.
• Component Accommodation: Supports VGA cards up to 255mm in length and CPU coolers up to 165mm in height. The power supply unit (PSU) is designed for bottom installation.

ຮູບພາບ 2.2: ລາຍລະອຽດ view of the front panel I/O, showing the power button, RGB LED control switch, LED indicators, audio ports, and USB ports.

Image 2.3: Internal layout indicating the bottom-mounted power supply unit area and the four expansion slots for add-on cards.

• Optimized Cooling Design: Engineered for superior airflow to maintain optimal temperatures during extended use.

Image 2.4: Visual representation of the chassis's internal airflow path, designed for efficient heat dissipation.

• ການກັ່ນຕອງຝຸ່ນ: Includes a magnetic dust filter at the top and a detachable dust filter at the bottom to prevent dust accumulation.
• ການຄຸ້ມຄອງສາຍໄຟ: Designed with features to facilitate effective cable organization, reducing clutter and improving airflow.

Image 2.5: Close-up of the top magnetic dust filter, demonstrating its easy removal for cleaning.

3. ຂໍ້ມູນຈໍາເພາະ

4. ຄູ່ມືການຕິດຕັ້ງ

Follow these steps to assemble your computer components within the ZEBRONICS ROBUST chassis.

4.1. Unpacking and Panel Removal

1. ເອົາຕົວຖັງອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ.
2. Place the chassis on a stable, flat surface.
3. Locate the thumbscrews on the rear of the chassis securing the tempered glass side panel. Unscrew them and carefully remove the side panel. Set it aside in a safe place to prevent damage.
4. Repeat for the other side panel if necessary for easier access.

4.2. ການຕິດຕັ້ງເມນບອດ

Image 4.1: Chassis interior indicating support for mATX and Mini ITX motherboard sizes.

1. Install the I/O shield that came with your motherboard into the corresponding opening at the rear of the chassis.
2. Align your mATX or Mini ITX motherboard with the pre-installed standoffs inside the chassis.
3. Secure the motherboard using the appropriate screws. Do not overtighten.

4.3. ການຕິດຕັ້ງຫນ່ວຍບໍລິການສະຫນອງພະລັງງານ (PSU).

1. Position your PSU in the designated bottom compartment of the chassis.
2. Ensure the PSU fan is facing downwards (if the chassis has a bottom vent) or upwards, depending on your cooling preference and chassis design.
3. Secure the PSU to the chassis using the screws provided with your PSU.

4.4. ການຕິດຕັ້ງໄດຣຟ໌ເກັບຂໍ້ມູນ

The chassis typically includes bays for 2.5-inch SSDs and 3.5-inch HDDs. Refer to your chassis's internal layout for specific mounting points.

1. Locate the drive bays or mounting brackets.
2. Install your SSDs or HDDs into the appropriate bays/brackets and secure them with screws.

4.5. Graphics Card (VGA) and Expansion Card Installation

1. Remove the necessary expansion slot covers from the rear of the chassis.
2. Insert your graphics card or other expansion cards into the corresponding PCIe slots on your motherboard.
3. Secure the cards with screws to the chassis.

4.6. ການເຊື່ອມຕໍ່ສາຍ Panel Front

Connect the front panel cables (USB, audio, power switch, reset switch, LED indicators) from the chassis to the corresponding headers on your motherboard. Refer to your motherboard manual for exact header locations.

4.7. ການຄຸ້ມຄອງສາຍໄຟ

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize and secure cables. This improves airflow and aesthetics.

4.8. Reattaching Panels

Once all components are installed and cables are managed, carefully reattach the side panels and secure them with the thumbscrews.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1. ເປີດ / ປິດພະລັງງານ

1. ໃຫ້ແນ່ໃຈວ່າອຸປະກອນພາຍນອກທັງໝົດ (ຈໍພາບ, ແປ້ນພິມ, ເມົາສ໌) ໄດ້ເຊື່ອມຕໍ່ແລ້ວ.
2. ເຊື່ອມຕໍ່ສາຍໄຟເຂົ້າກັບ PSU ແລະປລັກສຽບຝາ.
3. Press the power button on the front panel of the chassis to turn on your computer.
4. To turn off, use the operating system's shutdown function or press and hold the power button for several seconds.

5.2. LED Fan Control

The chassis features an RGB LED Control switch on the front panel. Press this button to cycle through various lighting modes and colors for the pre-installed LED fans.

6. ບໍາລຸງຮັກສາ

Regular maintenance helps ensure the longevity and optimal performance of your chassis and its components.

6.1. Cleaning Dust Filters

1. Periodically remove the top magnetic dust filter and the bottom detachable dust filter.
2. ເຮັດຄວາມສະອາດເຄື່ອງກອງດ້ວຍອາກາດອັດແໜ້ນ, ແປງອ່ອນໆ, ຫຼືໂດຍການລ້າງດ້ວຍນ້ໍາ (ໃຫ້ແນ່ໃຈວ່າພວກມັນແຫ້ງຫມົດກ່ອນທີ່ຈະຕິດຕັ້ງໃຫມ່).
3. Reattach the dust filters.

6.2. ທໍາຄວາມສະອາດທົ່ວໄປ

• Use a soft, dry cloth to wipe down the exterior surfaces of the chassis, including the tempered glass panels.
• For stubborn smudges on glass, a mild glass cleaner applied to a cloth (not directly to the glass) can be used.
• ຫຼີກເວັ້ນການໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ, ເພາະວ່າສິ່ງເຫຼົ່ານີ້ສາມາດທໍາລາຍການສໍາເລັດຮູບ.

7. ການແກ້ໄຂບັນຫາ

ພາກສ່ວນນີ້ແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບ.

7.1. ບໍ່ມີພະລັງງານ

• ໃຫ້ແນ່ໃຈວ່າສາຍໄຟໄດ້ເຊື່ອມຕໍ່ກັບທັງ PSU ແລະປລັກສຽບຝາຢ່າງແໜ້ນໜາແລ້ວ.
• Check that the power switch on the PSU itself is in the 'ON' position.
• ກວດສອບວ່າສາຍສະວິດໄຟຂອງແຜງດ້ານໜ້າໄດ້ເຊື່ອມຕໍ່ກັບຫົວສຽບຂອງເມນບອດຢ່າງຖືກຕ້ອງ.

7.2. Fans Not Spinning / LEDs Not Working

• Check that the fan power cables are securely connected to the motherboard or a fan controller.
• Ensure the RGB LED control cable (if separate from fan power) is properly connected.
• Press the RGB LED Control switch on the front panel to cycle through modes or turn on the LEDs.

7.3. ພອດ USB/ສຽງຢູ່ແຜງດ້ານໜ້າບໍ່ເຮັດວຽກ

• Verify that the USB and audio cables from the front panel are correctly connected to their respective headers on the motherboard.
• Check your operating system's device manager and audio settings to ensure drivers are installed and devices are enabled.

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official ZEBRONICS webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

For further assistance, you may contact ZEBRONICS customer support through their official channels.