ຄູ່ມືຜູ້ໃຊ້ເຄື່ອງສະຕາດ Baseus ແລະ ແບັດເຕີລີ່

1. ບົດແນະນຳ

Thank you for choosing the Baseus Jump Starter and Power Bank. This compact and powerful device is designed to provide reliable emergency jump-starting for your vehicle and serve as a portable power bank for your electronic devices. With its high capacity and robust safety features, it ensures you are prepared for unexpected situations on the road.

ກະລຸນາອ່ານຄູ່ມືນີ້ຢ່າງລະອຽດກ່ອນທີ່ຈະນໍາໃຊ້ຜະລິດຕະພັນເພື່ອຮັບປະກັນການເຮັດວຽກທີ່ປອດໄພແລະດີທີ່ສຸດ. ເກັບຮັກສາຄູ່ມືນີ້ໄວ້ເພື່ອອ້າງອີງໃນອະນາຄົດ.

2. ຜະລິດຕະພັນເກີນview ແລະຄຸນສົມບັດ

The Baseus Jump Starter and Power Bank (Model: BS-CH001) is a versatile 2-in-1 device featuring a 10,000mAh battery capacity, capable of delivering a peak current of 1000A for jump-starting vehicles. It also functions as a power bank with USB-A and Type-C outputs.

Figure 2.1: Baseus Jump Starter and Power Bank with Smart Ignition Clamp and USB-C cable.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• ປະສິດທິພາບສູງ: 10,000mAh / 3.7V / 37Wh capacity with 1000A peak current and 500A inrush current.
• Multi-function: Serves as both a car jump starter and a portable power bank.
• ຍາວ: Can jump-start a car up to 50 times on a single full charge. Maintains up to 85% of stored energy one year after last full charge when not in use.
• ຈໍດິຈິຕອນ: Built-in display shows the battery charge level.
• ທົນທານຕໍ່ອຸນຫະພູມ: High-performance polymer battery cells are resistant to very low (-20°C) and high temperatures (60°C).
• Power Bank Outputs: USB output (5V/2.4A Max) and Type-C output (5V/2.4A Max) for charging mobile devices.
• ຄວາມປອດໄພຂັ້ນສູງ: Equipped with 9 levels of protection, including overcharge, voltage stabilization, short circuit, over-discharge, reverse connection, overheating, and overcurrent protection.
• Portable: Compact size and technical parameters allow it to be carried on a plane (37Wh rated power conforms to civil aviation standards).
• LED ໃນຕົວ: Can be used as a flashlight.

3. ສິ່ງທີ່ຢູ່ໃນກ່ອງ

ເມື່ອເປີດແພັກເກັດ, ກະລຸນາຮັບປະກັນວ່າທຸກລາຍການຕໍ່ໄປນີ້ແມ່ນມີຢູ່ ແລະຢູ່ໃນສະພາບດີ:

• 1 x Baseus Jump Starter and Power Bank (Model: BS-CH001)
• 1 x ສາຍສາກ Type-C
• 1 x Smart Ignition Clamp (Crocodile Cables)

Figure 3.1: Product packaging showing the device and accessories.

4. ການຕິດຕັ້ງແລະການສາກໄຟ

ການສາກໄຟເບື້ອງຕົ້ນ:

Before first use, it is recommended to fully charge the Baseus Jump Starter. Connect the provided Type-C cable to the input port of the jump starter and the other end to a USB power adapter (not included, 5V/2.4A recommended). The digital display will indicate the charging progress.

A full charge typically takes several hours. Ensure the device is fully charged for optimal jump-starting performance.

Figure 4.1: USB and Type-C ports for charging the device and external devices.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1. Jump-Starting a Vehicle

Follow these steps carefully to safely jump-start your vehicle:

1. Step 1: Connect the Smart Ignition Clamps.

   Insert the smart ignition clamp's EC5 connector into the EC5 interface of the jump starter. The connection status will be indicated by flashing red and green lights on the clamp.

2. Step 2: Attach to Car Battery.

   Open the hood of your car. Connect the red (+) clamp ໄປຫາຂົ້ວບວກຂອງແບັດເຕີຣີລົດຂອງທ່ານ ແລະ cl ສີດຳ (-)amp to the negative terminal of your car battery. Ensure a secure connection.
3. Step 3: Start the Car.

   Return to the vehicle and start the engine. Once the car starts, immediately remove the jump starter from the battery terminals. First, disconnect the black (-) clamp, ຫຼັງຈາກນັ້ນສີແດງ (+) clamp, and finally unplug the smart ignition clamp ຈາກ starter ເຕັ້ນໄປຫາ.

Figure 5.1: Visual guide for the 3-step jump-starting process.

Important: Do not crank the engine for more than 3 seconds. If the car does not start, wait at least 30 seconds before attempting again. Do not attempt more than 3 consecutive starts without allowing the device to cool down.

5.2. ໃຊ້ເປັນ Power Bank

To charge your mobile devices, simply connect your device's charging cable to the USB-A or Type-C output port of the Baseus Jump Starter. The device will automatically begin charging your connected device.

Figure 5.2: The device can be used as a power bank to charge various electronic devices.

5.3. ການໃຊ້ໄຟສາຍ LED

The built-in LED can be used as a flashlight. Refer to the device's physical buttons for activation. Typically, a long press on the power button activates the flashlight, and subsequent presses may cycle through different modes (e.g., steady, strobe, SOS) or turn it off.

6. ຂໍ້ມູນຄວາມປອດໄພ ແລະຂໍ້ຄວນລະວັງ

Your safety is paramount. Please adhere to all safety guidelines to prevent injury or damage to the device and vehicle.

ກົດລະບຽບຄວາມປອດໄພທົ່ວໄປ:

• Always ensure the jump starter is fully charged before attempting to jump-start a vehicle.
• Do not use the device if the battery clamps ຫຼືສາຍເສຍຫາຍ.
• ຢ່າພະຍາຍາມໂດດເລີ່ມຕົ້ນຫມໍ້ໄຟທີ່ແຊ່ແຂງ.
• Ensure proper polarity when connecting the clamps (red to positive, black to negative). Reverse connection protection is built-in, but always double-check.
• ຮັກສາອຸປະກອນໃຫ້ຫ່າງຈາກເດັກນ້ອຍ.
• Do not expose the device to rain or extreme moisture.
• Do not disassemble, modify, or attempt to repair the device yourself. Contact qualified service personnel.
• ເກັບຮັກສາອຸປະກອນໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງເມື່ອບໍ່ໄດ້ໃຊ້.

Built-in Safety Protections:

The Baseus Jump Starter is equipped with 9 levels of protection for stable and trouble-free operation:

1. Top-quality lithium-polymer batteries
2. ການປົກປ້ອງ overcharge
3. ສະບັບtage ສະຖຽນລະພາບ
4. ປ້ອງກັນການຊ໊ອກໄຟຟ້າ
5. ການປ້ອງກັນວົງຈອນສັ້ນ
6. ການປ້ອງກັນການໄຫຼເກີນ
7. ການປ້ອງກັນການເຊື່ອມຕໍ່ກັບກັນ
8. ການປ້ອງກັນຄວາມຮ້ອນເກີນ
9. ການປົກປ້ອງກະແສໄຟຟ້າເກີນ

Figure 6.1: Smart Ignition Clamps designed for safe operation with multiple built-in protections.

7. ຂໍ້ມູນຈໍາເພາະ

8. ບໍາລຸງຮັກສາ

Proper maintenance ensures the longevity and optimal performance of your Baseus Jump Starter and Power Bank:

• ການເກັບຮັກສາ: ເກັບຮັກສາອຸປະກອນໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະອຸນຫະພູມທີ່ຮ້າຍກາດ.
• ການສາກໄຟ: For optimal battery health, charge the device every 3-6 months, even if not in use, to maintain its charge level.
• ທໍາຄວາມສະອາດ: ໃຊ້ຜ້າປຽກແຫ້ງເພື່ອເຮັດຄວາມສະອາດດ້ານນອກຂອງອຸປະກອນ. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງຫຼືເຄື່ອງເຮັດຄວາມສະອາດຂັດ.
• ການດູແລສາຍໄຟ: Inspect the smart ignition clamps and charging cable regularly for any signs of wear or damage. Replace if necessary.

9. ການແກ້ໄຂບັນຫາ

If you encounter issues with your Baseus Jump Starter, refer to the following common troubleshooting steps:

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Baseus products are manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including warranty period and coverage.

For technical support, troubleshooting assistance, or warranty claims, please contact Baseus customer service through their official website or the retailer from whom you purchased the product. Please have your product model number (BS-CH001 / Jump10K-Compact) and proof of purchase ready when contacting support.

ໝາຍເຫດ: ການຖອດປະກອບ ຫຼື ການດັດແປງຜະລິດຕະພັນໂດຍບໍ່ໄດ້ຮັບອະນຸຍາດຈະເຮັດໃຫ້ການຮັບປະກັນເປັນໂມຄະ.