ແນະນຳ
The Baseus BS-CH001 is a versatile device designed to provide emergency jump-starting for 12V vehicles and serve as a portable power bank for charging electronic devices. With a 10000mAh capacity and a peak current of 1000A, it offers a reliable solution for unexpected car battery issues and on-the-go power needs. This manual provides essential instructions for safe and effective use.
Note: Product images and videos are not included in this manual due to a discrepancy between the product description and the available media assets.
ເນື້ອໃນຊຸດ
ກະລຸນາກວດເບິ່ງຊຸດສຳລັບລາຍການຕໍ່ໄປນີ້:
- 1 x Baseus Car Jump Starter
- 1 x Smart Jump Starter Clamp Cable (with red and black alligator clips)
- 1 x ສາຍສາກ USB ຫາ Type-C
ຄຸນນະສົມບັດທີ່ສໍາຄັນ
- ປະສິດທິພາບສູງ: 10000mAh capacity, 12V start voltage, 500A starting current, and 1000A peak current.
- Multi-function: Acts as both a car jump starter and a portable power bank.
- Reliable Starts: Capable of starting a car up to 50 times on a single full charge.
- ຈໍສະແດງຜົນແບບປະສົມປະສານ: Digital screen shows the remaining battery level of the jump starter.
- ຄວາມຕ້ານທານອຸນຫະພູມສູງສຸດ: High-performance polymer battery cells ensure operation in very low and high temperatures.
- ຄວາມປອດໄພຂັ້ນສູງ: Features 9 levels of protection including overcharge, voltage stabilization, short circuit, over-discharge, reverse connection, and over-temperature protection.
- Low Standby Power: Retains up to 85% of stored energy after one year of non-use.
- ໄຟ LED ໃນຕົວ: Can be used as an emergency flashlight.
- Portable: Compact size and technical parameters allow it to be carried on an airplane.
ຂໍ້ມູນຄວາມປອດໄພ
ກະລຸນາອ່ານຄຳເຕືອນ ແລະ ຄຳແນະນຳດ້ານຄວາມປອດໄພທັງໝົດກ່ອນທີ່ຈະໃຊ້ຜະລິດຕະພັນນີ້. ການບໍ່ປະຕິບັດຕາມຄຳແນະນຳເຫຼົ່ານີ້ອາດຈະເຮັດໃຫ້ເກີດໄຟຟ້າຊັອດ, ໄຟໄໝ້ ແລະ/ຫຼື ການບາດເຈັບສາຫັດ.
- ຢ່າຖອດ, ດັດແປງ, ຫຼືສ້ອມແປງອຸປະກອນ.
- ຢ່າເຮັດໃຫ້ອຸປະກອນຖືກຝົນຫຼືຄວາມຊຸ່ມຊື່ນ.
- Do not use the device if the battery clamps ຫຼືສາຍເສຍຫາຍ.
- ຮັບປະກັນການເຊື່ອມຕໍ່ polarity ທີ່ເຫມາະສົມ (ສີແດງ clamp ກັບບວກ, cl ສີດໍາamp to negative) to avoid short circuits.
- ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
- ຢ່າໂດດເລີ່ມຕົ້ນຫມໍ້ໄຟທີ່ແຊ່ແຂງ.
- ຢ່າເຊື່ອມຕໍ່ cl ບວກແລະລົບamps ຮ່ວມກັນ.
- ໃຊ້ອຸປະກອນຢູ່ໃນພື້ນທີ່ລະບາຍອາກາດໄດ້ດີ.
- Remove the jump starter from the car battery immediately after starting the vehicle.
- ເກັບຮັກສາອຸປະກອນໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງເມື່ອບໍ່ໄດ້ໃຊ້.
Setup: Charging the Jump Starter
Before first use, fully charge the jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even when not in use.
- Connect the provided USB to Type-C charging cable to the Type-C input port on the jump starter.
- Connect the other end of the USB cable to a suitable USB power adapter (e.g., 5V/2.4A, not included).
- The digital display will show the charging progress. Charge until the display indicates 100%.
- ເມື່ອສາກເຕັມແລ້ວ, ໃຫ້ຖອດສາຍສາກອອກ.
Operating Instructions: Car Jump Starting
ປະຕິບັດຕາມຂັ້ນຕອນເຫຼົ່ານີ້ຢ່າງລະມັດລະວັງເພື່ອເຕັ້ນໄປຫາລົດຂອງທ່ານ:
- Step 1: Connect the Smart Clamp ສາຍ
Insert the smart jump starter clamp cable into the EC5 interface of the Baseus jump starter. The flashing red and green lights on the clamp indicate it's ready for connection to the car battery.
- Step 2: Connect to Car Battery
Open your car's hood. Connect the red positive (+) clamp to the positive (+) terminal of your car battery. Connect the black negative (-) clamp to the negative (-) terminal of your car battery. Ensure a secure connection.
- Step 3: Start the Vehicle
Return to your car and start the engine. If the car does not start immediately, wait a few seconds and try again. Do not crank the engine for more than 3 seconds at a time, and wait at least 30 seconds between attempts.
- ຂັ້ນຕອນທີ 4: ຕັດການເຊື່ອມຕໍ່
Once the car engine starts, immediately remove the smart jump starter clamp cable from the car battery terminals, then disconnect it from the jump starter. Do not drive with the jump starter connected.
ຄຳແນະນຳໃນການໃຊ້ງານ: ໜ້າທີ່ຂອງ Power Bank
The Baseus BS-CH001 can also be used to charge your electronic devices.
- Connect your device's charging cable (e.g., USB to Type-C, USB to Lightning) to the USB output port on the jump starter.
- ເຊື່ອມຕໍ່ປາຍອີກດ້ານໜຶ່ງຂອງສາຍໄຟເຂົ້າກັບອຸປະກອນເອເລັກໂຕຣນິກຂອງທ່ານ.
- The jump starter will automatically begin charging your device. The digital display will show the remaining power.
- Once charging is complete, disconnect your device and the cable.
ບໍາລຸງຮັກສາ
- ເຊັດອຸປະກອນດ້ວຍຜ້າແຫ້ງ ແລະ ນຸ່ມ. ຢ່າໃຊ້ນໍ້າຢາເຮັດຄວາມສະອາດທີ່ມີສີຂັດ ຫຼື ຕົວລະລາຍ.
- Store the jump starter in a cool, dry place, away from direct sunlight and extreme temperatures.
- For optimal battery life, fully charge the device at least once every 3-6 months.
- ຮັກສາ clamp cables clean and free from corrosion.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ອຸປະກອນບໍ່ເປີດ. | ແບັດເຕີຣີໝົດ. | ສາກໄຟເລີ່ມໂດດເຕັມທີ່. |
| Car does not start. | ບໍ່ຖືກຕ້ອງ clamp ການເຊື່ອມຕໍ່. | ຮັບປະກັນ clamps ໄດ້ເຊື່ອມຕໍ່ກັບຂົ້ວແບັດເຕີຣີທີ່ຖືກຕ້ອງ (ສີແດງຫາ +, ສີດຳຫາ -). |
| Car does not start. | Car battery is severely damaged or frozen. | Consult a professional mechanic. Do not attempt to jump start a frozen battery. |
| ອຸປະກອນຮ້ອນໃນລະຫວ່າງການນໍາໃຊ້. | ການເຮັດວຽກປົກກະຕິໃນລະຫວ່າງການປ່ອຍກະແສໄຟຟ້າສູງ. | This is normal. If it becomes excessively hot or emits smoke, discontinue use immediately. |
| Electronic device not charging. | Jump starter battery low or cable issue. | Ensure jump starter is charged. Check if the charging cable is properly connected and functional. |
ຂໍ້ມູນຈໍາເພາະ
| ຍີ່ຫໍ້ | Baseus |
| ຕົວແບບ | BS-CH001 |
| ຄວາມອາດສາມາດ | 10000 mAh / 3.7V / 37 Wh |
| ການປ້ອນຂໍ້ມູນ Voltage (Type-C) | 5V/2.4A (ສູງສຸດ) |
| ພະລັງງານອອກ USB | 5V/2.4A (ສູງສຸດ) |
| ເລີ່ມ Voltage | 12V |
| ກຳລັງເລີ່ມປະຈຸບັນ | 500A |
| ປະຈຸບັນສູງສຸດ | 1000A |
| ນ້ຳໜັກ | 470g |
| ຂະໜາດ | 10 x 5 x 5 cm (approximate, based on product description) |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
This product comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Baseus website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Baseus customer service through their official channels.
Note: No specific warranty period or support contact information was provided in the product data. Please refer to the manufacturer's official resources.
