Perlegear PGLF11 Full Motion TV Wall Mount with Integrated Power Strip Instruction Manual

ແນະນຳ

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Perlegear PGLF11 Full Motion TV Wall Mount. This mount is designed to accommodate most flat or curved TVs from 42 to 90 inches, with VESA patterns ranging from 200x100mm to 600x400mm, and supports TVs up to 150 lbs. It features an integrated power strip for convenient cable management and flexible viewing adjustments including swivel, tilt, and extension.

ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

Please read all instructions carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, assembly, or use of this product, contact a qualified professional installer. Improper installation may cause serious personal injury or damage.

• ຄວາມອາດສາມາດນ້ໍາຫນັກ: ບໍ່ເກີນຄວາມອາດສາມາດນ້ໍາຫນັກສູງສຸດຂອງ 150 lbs (68 kg).
• ປະເພດຝາ: This TV mount is designed for installation on 12"/16"/24" wood studs, solid concrete walls, or brick walls. ຢ່າ ຕິດຕັ້ງຢູ່ເທິງ drywall ຢ່າງດຽວ.
• ການຂຸດເຈາະ: Use appropriate drill bits for your wall type. Handle power tools carefully to avoid injury.
• ສະພາແຫ່ງ: Ensure all components are securely fastened before use. Do not overtighten screws.
• ເດັກນ້ອຍ: ໃຫ້ເດັກນ້ອຍຢູ່ຫ່າງຈາກພື້ນທີ່ເຮັດວຽກໃນລະຫວ່າງການຕິດຕັ້ງ.
• ບໍາລຸງຮັກສາ: Regularly check that the mount is secure and safe to use.

ເນື້ອໃນຊຸດ

Verify that all parts are included and undamaged. If any parts are missing or defective, contact Perlegear customer support.

Image: All components of the Perlegear PGLF11 TV Wall Mount, including the pre-assembled mount, power strip, various screws, and wall anchors.

• Pre-assembled Full Motion TV Wall Mount (Main Unit)
• Integrated Power Strip with 7.87 ft power cord (3 AC outlets, 2 USB ports)
• TV Brackets (for attaching to TV)
• ເຄື່ອງມືລະດັບ
• Various TV bolts, washers, and spacers to fit different TV models
• Wall anchors and lag bolts for wood stud and concrete/brick wall installation
• Cable management straps
• ແມ່ແບບເຈາະ

ເຄື່ອງມືທີ່ຕ້ອງການ (ບໍ່ລວມ)

• ເຈາະໄຟຟ້າ
• ສໍ
• Phillips Screwdriver
• ເທບວັດແທກ
• 1/2" (13mm) Socket Wrench
• ເຄື່ອງຊອກຫາເສົາ (ສຳລັບຝາຜະໜັງເສົາໄມ້)
• Awl (for wood stud walls)
• 7/32" (5.5mm) Wood Drill Bit (for wood stud walls)
• Hammer (for solid concrete/brick walls)
• 3/8" (10mm) Concrete Drill Bit (for solid concrete/brick walls)

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

The installation process involves three basic steps: attaching TV brackets to your TV, mounting the wall plate assembly on the wall, and hanging your TV on the front support. A pre-assembled design reduces installation steps by 30%.

ຂັ້ນຕອນທີ 1: ຕິດຂາຕັ້ງໂທລະພາບໃສ່ໂທລະພາບ

Select the appropriate bolts, washers, and spacers for your TV model. Ensure the bolts are long enough to securely fasten the brackets but not so long that they damage the TV's internal components. Use spacers if your TV has a curved back or protruding cables/features around the VESA mounting holes.

Image: Illustrates VESA patterns (200x100mm to 600x400mm) and maximum load capacity (150 lbs) for TV compatibility.

The mount supports VESA patterns from 200x100mm to 600x400mm. For TVs with flat backs, curved backs, or those with a "bump" or protruding cables, specific spacer combinations may be required. Refer to the detailed instructions in the included manual for proper bolt and spacer selection based on your TV type.

Step 2: Mount Arm Assembly / Wall Plate on the Wall

Determine your wall type (wood stud, solid concrete, or brick) and use the appropriate tools and hardware. ຢ່າຕິດຕັ້ງໃສ່ drywall ຢ່າງດຽວ. Use the provided drilling template to mark the pilot holes accurately. Ensure the wall plate is level using the included level tool.

Image: Depicts compatible wall types for installation: wood studs (12"/16"/24" spacing), solid concrete, and brick walls. Emphasizes not to mount on drywall alone.

For wood stud installation, use a stud finder to locate the center of the studs. Drill pilot holes using a 7/32" (5.5mm) wood drill bit. For solid concrete or brick walls, drill pilot holes using a 3/8" (10mm) concrete drill bit and insert the concrete anchors before fastening the wall plate.

Step 3: Attach the Power Outlet

The integrated power strip can be attached to the wall mount in various positions (e.g., above or below the wall plate) to best suit your setup and cable routing needs. Secure it using the provided screws.

Image: Close-up of the integrated power strip, showing 3 AC outlets, 2 USB ports, and the power cord.

ຂັ້ນຕອນທີ 4: ວາງສາຍໂທລະທັດຂອງທ່ານ

Carefully lift the TV with the attached brackets and hook them onto the front support of the wall mount. Ensure the TV is centered and securely seated. Use the safety screws to lock the TV brackets to the mount, preventing accidental dislodgement.

Image: Demonstrates the TV mount extending up to 22 inches and retracting to 2.9 inches, showing the tilt mechanism for the power outlet.

Operating the TV Wall Mount

Your Perlegear PGLF11 mount offers ultimate flexibility for optimal viewມຸມ.

Adjusting Swivel, Tilt, and Extension

• ໝູນ: The mount allows for a 130° smooth swivel, enabling you to direct the screen towards your desired viewພື້ນທີ່.
• ອຽງ: Adjust the tilt angle from +5° to -15° without tools to reduce glare and optimize viewສະດວກສະບາຍ.
• ສ່ວນຂະຫຍາຍ/ການຖອນຄືນ: The mount can extend up to 22 inches for flexible viewing and retracts back to 2.9 inches for a low-profile look when not in use.
• ການປັບລະດັບ: Fine-tune your TV's position with a +/-3° leveling adjustment after installation.

Image: Shows the mount's capabilities including 130° swivel, +/-3° leveling, and +5°/-15° tool-free tilt.

ບໍາລຸງຮັກສາ

Regularly inspect the mount for any signs of wear, damage, or loose connections. Tighten any loose screws or bolts as needed. Clean the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish.

ການແກ້ໄຂບັນຫາ

• ໂທລະພາບບໍ່ແມ່ນລະດັບ: Use the +/-3° leveling adjustment feature. If still uneven, ensure the wall plate was installed level and all bolts are tightened evenly.
• Mount ຮູ້ສຶກບໍ່ຫມັ້ນຄົງ: Double-check all wall mounting bolts and TV bracket screws for tightness. Ensure the mount is installed on a compatible and structurally sound wall type.
• ຄວາມຫຍຸ້ງຍາກໃນການປັບຄວາມອຽງ: If the tilt lever is hard to move, loosen the opposite bolt slightly, adjust the tilt, then retighten.
• ສາຍໄຟບໍ່ເປັນລະບຽບ: Utilize the included cable management straps to bundle and route cables neatly along the mount arms.

Image: Shows how to organize cables using the provided straps, ensuring a clean and tidy setup behind the TV.

ຂໍ້ມູນຈໍາເພາະ

ຂໍ້ມູນການຮັບປະກັນ

ລາຍລະອຽດການຮັບປະກັນສະເພາະແມ່ນມັກຈະມີໃຫ້ພ້ອມກັບການຫຸ້ມຫໍ່ຜະລິດຕະພັນຂອງທ່ານ ຫຼື ຢູ່ໃນໃບແຈ້ງການຢ່າງເປັນທາງການຂອງຜູ້ຜະລິດ website. Please refer to those resources for the most accurate and up-to-date warranty information.

ການຊ່ວຍເຫຼືອລູກຄ້າ

If you have any questions about installation, product selection, or require further assistance, please do not hesitate to contact our professional product support team. Contact information can typically be found in your product packaging or on the official Perlegear webເວັບໄຊ.

For quick assistance, you may also refer to the contact details provided on the drilling template included with your mount.