OONO D-1561T

OONO DIN Rail Mount AC 120V NEMA 5-15R 4 Receptacles Outlet Power Strip Module D-1561T User Manual

Model: D-1561T

ຍີ່ຫໍ້: OONO

1. ບົດແນະນຳ

This user manual provides essential information for the safe and efficient operation of your OONO DIN Rail Mount AC 120V NEMA 5-15R 4 Receptacles Outlet Power Strip Module, Model D-1561T. Please read this manual thoroughly before installation and use, and retain it for future reference. This module is designed for integration into electrical systems requiring DIN rail mounting and offers four NEMA 5-15R outlets with an integrated rocker switch and thermal circuit breaker for overload protection.

2. ຂໍ້ມູນຄວາມປອດໄພ

Always adhere to local electrical codes and safety regulations during installation and operation. Improper installation or use can result in electric shock, fire, or damage to equipment.

3. ຜະລິດຕະພັນເກີນview

3.1 ຄຸນສົມບັດ

3.2 ອົງປະກອບ

The OONO D-1561T module consists of the following key components:

3.3 ຮູບພາບຜະລິດຕະພັນ

ດ້ານໜ້າ view of the OONO D-1561T power strip module
ດ້ານໜ້າ view of the OONO D-1561T power strip module, showing the four NEMA 5-15R receptacles, the rocker switch with reset button, and input terminals.
ມຸມ view of the OONO D-1561T power strip module
ມຸມ view of the OONO D-1561T module, highlighting the robust construction and terminal block connections.
ມຸມອື່ນ view of the OONO D-1561T power strip module
A different angled perspective of the power strip module, showing the side profile and receptacle arrangement.
Schematic diagram of the OONO D-1561T power strip module
Electrical schematic diagram illustrating the internal wiring and connections of the NEMA 5-15R outlets, circuit breaker, and input terminals.
Dimensional drawing of the OONO D-1561T power strip module
Detailed dimensional drawing of the OONO D-1561T module, providing measurements for installation planning.
OONO D-1561T power strip module mounted on a DIN rail
The OONO D-1561T power strip module securely mounted on a standard DIN rail, demonstrating its intended installation method.
ລຸ່ມ view of the OONO D-1561T power strip module
ລຸ່ມ view of the OONO D-1561T module, showing the DIN rail mounting clips and overall construction.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

4.1 ການຕິດຕັ້ງເທິງລົດໄຟ DIN

The D-1561T module is designed for quick and secure mounting on a standard 35mm DIN rail.

  1. Ensure the DIN rail is properly installed and secured within your electrical enclosure.
  2. Align the module's DIN rail clips with the top edge of the DIN rail.
  3. ກົດໂມດູນລົງໃຫ້ແໜ້ນຈົນກວ່າມັນຈະຄລິກເຂົ້າທີ່ຮາວ.
  4. To remove, gently pull the bottom edge of the module away from the rail while lifting upwards.

Video demonstrating the installation of a similar OONO DIN rail mount power strip module onto a DIN rail. This video illustrates the secure mounting process.

4.2 ຄໍາແນະນໍາການສາຍ

Before wiring, ensure all power is OFF at the source. Connect the incoming AC 120V power to the input terminal blocks as follows:

The input terminals accommodate 26~10 AWG wire. For optimal and secure connections, it is highly recommended to use wire ferrules on the stripped ends of your wires before inserting them into the terminal blocks. Strip approximately 8mm of insulation from the wire ends. Tighten the Metric M3 slotted screws firmly to ensure a reliable connection.

ວິ​ດີ​ໂອ showcasing the wiring and functionality of an OONO DIN rail mount power module with a rocker switch and overload protector. This video provides a visual guide to connecting the power input and operating the switch.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1 ການເປີດ/ປິດ

The module features a rocker switch with an integrated thermal circuit breaker for controlling power to the four NEMA 5-15R outlets.

5.2 ການປ້ອງກັນການໂຫຼດເກີນ

ປະສົມປະສານ 15 Amp thermal circuit breaker protects connected devices from overcurrent conditions. If the total current draw from the outlets exceeds 15 Amps, the circuit breaker will trip, automatically cutting power to the outlets. The rocker switch will move to a central or 'TRIPPED' position.

6. ບໍາລຸງຮັກສາ

Regular maintenance ensures the longevity and safe operation of your power strip module.

7. ການແກ້ໄຂບັນຫາ

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
ບໍ່ມີໄຟຟ້າໄປຫາປລັກສຽບ.Rocker switch is OFF or tripped.Press the rocker switch to the 'ON' position. If tripped, reduce load and reset.
ບໍ່ມີໄຟຟ້າໄປຫາປລັກສຽບ.No incoming power to the module.Check the main circuit breaker and power source supplying the module. Verify input wiring.
ເຄື່ອງຕັດວົງຈອນເຮັດວຽກຊ້ຳໆ.Overload condition (total current exceeds 15 Amps).Reduce the number of devices connected or replace high-power devices with lower-power alternatives. Ensure total load is below 15 Amps.
Loose connections or arcing at terminals.Improperly tightened terminal screws or inadequate wire preparation.Disconnect power, re-strip wires, use ferrules, and securely tighten terminal screws. Consult a qualified electrician if unsure.

8. ຂໍ້ມູນຈໍາເພາະ

ຂໍ້ມູນຈໍາເພາະມູນຄ່າ
ໝາຍເລກຕົວແບບD-1561T
ຍີ່ຫໍ້OONO
ການເຮັດວຽກ VoltageAC 120V
ປລັກສຽບໄຟທັງໝົດ4 (NEMA 5-15R)
Single Receptacle Rated Current15 Amps
Total Output Rated Current15 Amps (limited by overload protector)
Overload Protector Current15 Amps
Input Terminals Pitch7.62 ມມ / 0.3"
Max Input Current per Position30 Amps
ຂະໜາດສາຍທີ່ເຂົ້າກັນໄດ້26~10 AWG
ຄວາມຍາວຂອງລອກເອົາ8ມມ
ປະເພດ ScrewMetric M3 slotted screw
DIN Rail Compatibilityລາງລົດໄຟ 35 ມມ
ວັດສະດຸHigh quality fireproof nylon
ການຢັ້ງຢືນUL, CE, CQC (for specific components)
ຂະໜາດແພັກເກັດ8.5 x 2.6 x 2.09 ນິ້ວ
ນ້ໍາຫນັກລາຍການ8.47 ອອນ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the product packaging or contact OONO customer service directly. Keep your purchase receipt as proof of purchase.

You can visit the OONO Store for more information: OONO Store on Amazon

ເອກະສານທີ່ກ່ຽວຂ້ອງ - D-1561T

ກ່ອນview OONO F-1063B ຄູ່ມືແລະສະຫຼັບການໂອນອັດຕະໂນມັດ - 120V 15A ATS
ຄູ່ມືລາຍລະອຽດສໍາລັບ OONO F-1063B ຄູ່ມືແລະສະຫຼັບການໂອນອັດຕະໂນມັດ. ຮຽນ​ຮູ້​ກ່ຽວ​ກັບ​ລັກ​ສະ​ນະ​ຂອງ​ຕົນ​, ສະ​ເພາະ​, ການ​ຕິດ​ຕັ້ງ​, ແລະ​ຄວາມ​ປອດ​ໄພ​ສໍາ​ລັບ​ການ​ສະ​ຫຼັບ​ລະ​ຫວ່າງ inverter / generator ແລະ​ແຫຼ່ງ​ພະ​ລັງ​ງານ​ອຸ​ປະ​ກອນ​.
ກ່ອນview OONO F-1030 Series DPST 1NO 1NC 8Amp ໂມດູນຣີເລລັອກ | ລາຍລະອຽດທາງເທັກນິກ
ລາຍລະອຽດທາງເທັກນິກ, ຄຸນສົມບັດ ແລະ ແຜນວາດສາຍໄຟສຳລັບຊຸດ OONO F-1030 DPST 1NO 1NC 8Amp ໂມດູນຣີເລລັອກ. ກວມເອົາໂໝດການຄວບຄຸມອິນພຸດ, ຄວາມສາມາດໃນການສະຫຼັບຜົນຜະລິດ, ລະດັບສຽງtagລຸ້ນ e, ແລະ ມິຕິຕ່າງໆ.
ກ່ອນview OONO F-1057 ຄູ່ມືຜູ້ໃຊ້ Relay ຄວາມຮ້ອນໄຟຟ້າ
ຄໍາແນະນໍາແລະຂໍ້ກໍາຫນົດສໍາລັບ OONO F-1057 ສະຫຼັບ Relay ຄວາມຮ້ອນໄຟຟ້າທີ່ມີຕົວແປງ 24V, ອອກແບບສໍາລັບ AC 120V ການໂຫຼດຕ້ານທານຄວບຄຸມໂດຍ vol ຕ່ໍາ.tagເຄື່ອງຄວບຄຸມອຸນຫະພູມ.
ກ່ອນview OONO F-1040 ອັດຕະໂນມັດຕ່ໍາ Voltage Disconnect Module: ຄຸນສົມບັດ, ຂໍ້ມູນສະເພາະ, ແລະການຕິດຕັ້ງ
ຂໍ້ມູນລະອຽດກ່ຽວກັບ OONO F-1040 Automatic Low Voltage Disconnect Module, ລວມທັງຄຸນສົມບັດຂອງມັນ, ປະຕິບັດການ voltage, ການຈັດອັນດັບປະຈຸບັນ, ຄູ່ມືການຕິດຕັ້ງ, ແລະຂໍ້ມູນສະເພາະສໍາລັບການປົກປ້ອງຫມໍ້ໄຟຈາກການໄຫຼເລິກ.
ກ່ອນview OONO F-1021 ຊຸດ 50 Amp ໂມດູນ Relay Forward & Reverse - ຂໍ້ມູນສະເພາະທາງດ້ານວິຊາການ
ຂໍ້ມູນຈໍາເພາະ, ຄຸນສົມບັດ, ແຜນຜັງສາຍ, ແລະຂະຫນາດທີ່ສົມບູນແບບສໍາລັບ OONO F-1021 ຊຸດ 50 Amp ໂມດູນ Relay Forward & Reverse, ອອກແບບມາສໍາລັບຄໍາຮ້ອງສະຫມັກການຄວບຄຸມມໍເຕີຮຽກຮ້ອງໃຫ້ມີການປີ້ນກັບການເຄື່ອນໄຫວ.
ກ່ອນview OONO 10 Amp Forward & Relay Module F-1020 Series: ຄູ່ມືຜູ້ໃຊ້
ຄູ່ມືລາຍລະອຽດສໍາລັບ OONO F-1020 ຊຸດ 10 Amp ໂມດູນ Relay Forward & Reverse, ກວມເອົາຄຸນສົມບັດ, ຂໍ້ມູນສະເພາະ, ແຜນຜັງສາຍ, ແລະຂະຫນາດສໍາລັບລຸ້ນ 5V, 12V, ແລະ 24V.