Sunco Lighting WR_PR8-WH-4060K-2PK

Sunco LED Shop Light Instruction Manual

Model: WR_PR8-WH-4060K-2PK

1. ບົດແນະນຳ

Thank you for choosing the Sunco LED Shop Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.

Sunco 4ft LED Shop Light, full view

Image 1.1: Sunco 4ft LED Shop Light

2. ຂໍ້ມູນຄວາມປອດໄພ

To reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts, cuts, abrasions, and other hazards, please read all warnings and instructions included with and on the fixture box and all fixture labels.

  • ຄຳເຕືອນ: ຄວາມສ່ຽງຕໍ່ການເກີດໄຟຟ້າຊັອດ. ໃຫ້ຕັດການເຊື່ອມຕໍ່ໄຟຟ້າຢູ່ທີ່ຟິວ ຫຼື ເບຣກເກີກ່ອນການຕິດຕັ້ງ ຫຼື ບໍລິການ.
  • ຄຳເຕືອນ: ຄວາມສ່ຽງຕໍ່ໄຟໄໝ້. Minimum 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
  • WARNING: Risk of Injury. ໃສ່ແວ່ນຕາແລະຖົງມືຄວາມປອດໄພໃນລະຫວ່າງການຕິດຕັ້ງແລະການບໍລິການ.
  • fixture ນີ້ແມ່ນມີຈຸດປະສົງ ໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ. Do not use in wet locations or where directly exposed to water.
  • ເຄື່ອງປະກອບນີ້ແມ່ນ ບໍ່ dimmable. Do not connect to a dimmer switch.
  • ຢ່າດັດແປງອຸປະກອນ. ການ​ດັດ​ແກ້​ໃດ​ໜຶ່ງ​ອາດ​ຈະ​ລົບ​ລ້າງ​ການ​ຮັບ​ປະ​ກັນ ແລະ​ສ້າງ​ຄວາມ​ສ່ຽງ​ດ້ານ​ຄວາມ​ປອດ​ໄພ.
  • ຮັບປະກັນການສະຫນອງ voltage ເຂົ້າກັນໄດ້ກັບອຸປະກອນ (120V-277V).

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ອົງ​ປະ​ກອບ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ກ່ອນ​ທີ່​ຈະ​ເລີ່ມ​ຕົ້ນ​ການ​ຕິດ​ຕັ້ງ​:

  • 2 x Sunco LED Shop Light Fixtures
  • Mounting Equipment (Surface)

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Follow these steps for a quick and easy setup. Always ensure power is disconnected at the source before proceeding.

  1. ກະກຽມສະຖານທີ່ຕິດຕັ້ງ: Identify the desired ceiling location for the fixture. Ensure the mounting surface is capable of supporting the fixture's weight.
  2. ຕິດຕັ້ງຮາດແວຕິດຕັ້ງ: Use the provided mounting equipment to securely attach the fixture housing to the ceiling. Refer to Image 4.1, Step 1.
  3. ເຊື່ອມຕໍ່ສາຍ: Carefully connect the electrical wires from the power supply to the fixture's wires. Ensure proper polarity (live to live, neutral to neutral, ground to ground). Refer to Image 4.1, Step 2.
  4. Secure Fixture: Once wiring is complete, snap the fixture into place, ensuring it is firmly seated against the mounting surface. Refer to Image 4.1, Step 3.
Three-step installation guide for Sunco LED Shop Light: Screw in housing, Connect Wires, Snap into place.

ຮູບພາບ 4.1: ຂັ້ນຕອນການຕິດຕັ້ງ

Daisy Chain Linkability

This fixture features daisy chain linkability, allowing multiple units to be connected for extended lighting coverage. To link fixtures, knock out the designated punch hole on the end of the fixture and connect the wires to the next unit. Ensure the total wattage ຂອງອຸປະກອນທີ່ເຊື່ອມຕໍ່ບໍ່ເກີນຄວາມຈຸຂອງວົງຈອນ.

Diagram showing daisy chain linkability with a knockout punch hole for wire connection.

Image 4.2: Daisy Chain Connection Point

5. ຄໍາແນະນໍາການດໍາເນີນງານ

The Sunco LED Shop Light is designed for simple operation and provides instant illumination upon activation.

Selectable Color Temperature (CCT)

Your fixture includes an integrated switch to select between three color temperatures: 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White). Locate the CCT switch on the fixture and slide it to your desired setting before or after installation. The light will turn on instantaneously at the selected color temperature.

Comparison of 4000K, 5000K, and 6000K color temperatures in a garage setting.

Image 5.1: Selectable CCT Options

6. ບໍາລຸງຮັກສາ

The Sunco LED Shop Light is designed for long-lasting performance with minimal maintenance.

  • ທໍາຄວາມສະອາດ: Ensure the power is off before cleaning. Wipe the exterior of the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish or optical components.
  • ໄຟ LED: The integrated LED light source is designed for a long lifespan (50,000 hours) and is not user-replaceable.

7. ການແກ້ໄຂບັນຫາ

If you experience issues with your Sunco LED Shop Light, refer to the following common troubleshooting steps:

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
ແສງບໍ່ເປີດບໍ່ມີການສະຫນອງພະລັງງານ
ສາຍໄຟບໍ່ຖືກຕ້ອງ
CCT switch not set
ກວດເບິ່ງເຄື່ອງຕັດວົງຈອນ ແລະສະວິດຝາ.
Verify all wire connections are secure and correct.
Ensure the CCT switch is set to a valid color temperature.
ແສງສະຫວ່າງ flickersການສະຫນອງພະລັງງານບໍ່ຫມັ້ນຄົງ
ການເຊື່ອມຕໍ່ສາຍໄຟວ່າງ
ໃຫ້ແນ່ໃຈວ່າການສະຫນອງພະລັງງານມີຄວາມຫມັ້ນຄົງແລະພາຍໃນ vol ທີ່ກໍານົດໄວ້tage ຊ່ວງ.
ກວດສອບການເຊື່ອມຕໍ່ສາຍໄຟທັງໝົດສຳລັບຄວາມແໜ້ນໜາ.
ແສງສະຫວ່າງບໍ່ສະຫວ່າງຕາມທີ່ຄາດໄວ້ການຕັ້ງຄ່າ CCT ບໍ່ຖືກຕ້ອງ
ຂີ້ຝຸ່ນ ຫຼືສິ່ງເສດເຫຼືອຢູ່ເທິງເລນ
Adjust the CCT switch to a brighter setting (e.g., 6000K).
Clean the lens according to maintenance instructions.

8. ຂໍ້ມູນຈໍາເພາະ

ຍີ່ຫໍ້ແສງແດດ Sunco
ໝາຍເລກຕົວແບບWR_PR8-WH-4060K-2PK
ຂະໜາດສິນຄ້າ48"L x 8.58"W x 2.56"H
ວັດtage60W
ຄວາມສະຫວ່າງ7200 Lumens
ປະສິດທິພາບ118 LM/W
ອຸນຫະພູມສີ (CCT)Selectable 4000K, 5000K, 6000K
ສະບັບtage120V-277V
Dimmableບໍ່
ການນຳໃຊ້ພາຍໃນ/ນອກIndoor ເທົ່ານັ້ນ
ປະເພດການຕິດຕັ້ງFlush Mount
ຄຸນນະສົມບັດພິເສດສາມາດເຊື່ອມໂຍງໄດ້
ປະເພດແຫຼ່ງແສງLED
ວັດສະດຸAlloy Steel, Polycarbonate
ຊີວິດສະເລ່ຍ50,000 ຊົ່ວໂມງ
ການຢັ້ງຢືນETL, FCC, RoHS
ຈໍານວນລາຍການ2 (Pack)

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Sunco Lighting ຢືນຢູ່ເບື້ອງຫຼັງຄຸນນະພາບຂອງຜະລິດຕະພັນຂອງຕົນ.

  • ການຮັບປະກັນ: ຜະລິດຕະພັນນີ້ໄດ້ຮັບການສະໜັບສະໜູນຈາກ ຮັບປະກັນ 3 ປີ ຈາກວັນທີ່ຊື້. ກະລຸນາຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນ.
  • ການຊ່ວຍເຫຼືອລູກຄ້າ: For technical assistance, troubleshooting, or warranty inquiries, please contact Sunco Lighting customer support. Our knowledgeable support specialists are available to assist you.

Video 9.1: Get to Know Sunco Lighting - Learn about Sunco's commitment to quality and customer satisfaction.

ເອກະສານທີ່ກ່ຽວຂ້ອງ - WR_PR8-WH-4060K-2PK

ກ່ອນview Sunco Lighting 2x2 LED ເລືອກການຕິດຕັ້ງແຜງເພດານ
ຄູ່ມືການຕິດຕັ້ງທີ່ສົມບູນແບບສໍາລັບ Sunco Lighting 2x2 LED Selectable Ceiling Panel (PN22_DU-WH-4060K). ຮຽນຮູ້ວິທີຕິດຕັ້ງ ແລະສາຍໄຟ LED ທີ່ມີປະສິດຕິພາບພະລັງງານ, ຫຼຸດແສງໄດ້ດ້ວຍວັດທີ່ເລືອກໄດ້ຢ່າງປອດໄພtage ແລະຕົວເລືອກອຸນຫະພູມສີ.
ກ່ອນview Sunco Lighting T8 LED Tube Ballast Bypass (ປະເພດ B) ຄູ່ມືການຕິດຕັ້ງ
ຄູ່ມືການຕິດຕັ້ງແລະຄູ່ມືທີ່ສົມບູນແບບສໍາລັບ Sunco Lighting's T8 LED Tube Ballast Bypass (Type B). ລວມມີຂັ້ນຕອນການຕິດຕັ້ງງ່າຍ, ຂໍ້ມູນສະເພາະ, ແລະການເຕືອນໄພທີ່ສຳຄັນສຳລັບການຕິດຕັ້ງທີ່ປອດໄພ ແລະ ເໝາະສົມ.
ກ່ອນview Sunco Lighting Dusk to Dawn LED User Guide and Manual
Comprehensive user guide and manual for Sunco Lighting's Dusk to Dawn LED bulbs and fixtures, explaining photocell technology, installation tips, and best practices for optimal performance.
ກ່ອນview Sunco Lighting 2x2 LED Panel Light - ເລືອກຄູ່ມືການຕິດຕັ້ງ CCT ແລະຄູ່ມື
ຄູ່ມືການຕິດຕັ້ງທີ່ສົມບູນແບບແລະຄູ່ມືສໍາລັບ Sunco Lighting 2x2 LED Ceiling Panel with Selectable CCT. ຮຽນ​ຮູ້​ວິ​ທີ​ການ​ຕິດ​ຕັ້ງ​ອຸ​ປະ​ກອນ recessed ຫຼື suspended, ແຜນ​ວາດ​ສາຍ​ໄຟ, ຄໍາ​ເຕືອນ​ຄວາມ​ປອດ​ໄພ, ແລະ​ສະ​ເພາະ.
ກ່ອນview Sunco Lighting Dusk to Dawn LED ຄູ່ມືຜູ້ໃຊ້ & ການປະຕິບັດທີ່ດີທີ່ສຸດ
ຮຽນຮູ້ວິທີການໃຊ້ຫລອດໄຟ LED Dusk ຫາ Dawn ຂອງ Sunco Lighting ແລະອຸປະກອນສໍາລັບໄຟກາງແຈ້ງອັດຕະໂນມັດ. ຄູ່ມືນີ້ກວມເອົາເທກໂນໂລຍີ photocell, ຄໍາແນະນໍາການຕິດຕັ້ງ, ແລະການປະຕິບັດທີ່ດີທີ່ສຸດສໍາລັບການປະຕິບັດທີ່ດີທີ່ສຸດ.
ກ່ອນview Sunco Lighting Wraparound 11" LED Fixture ຄູ່ມືການຕິດຕັ້ງແລະຄູ່ມື
ຄູ່ມືການຕິດຕັ້ງທີ່ສົມບູນແບບແລະຄູ່ມືສໍາລັບ Sunco Lighting Wraparound LED fixture 11 ນິ້ວ. ລວມມີຄຳແນະນຳເທື່ອລະຂັ້ນຕອນສຳລັບກ່ອງແຍກ ແລະການຕິດຕັ້ງຮູກະແຈ, ລາຍການອົງປະກອບ, ຄຳເຕືອນດ້ານຄວາມປອດໄພ ແລະຂໍ້ສະເພາະຕ່າງໆເພື່ອຕິດຕັ້ງງ່າຍ.