1. ບົດແນະນຳ
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Saris Bones EX Car Trunk Bicycle Rack Carrier. Please read this manual thoroughly before attempting to install or use the product. Retain this manual for future reference.
The Saris Bones EX is designed to transport up to three bicycles securely on the trunk of compatible vehicles. Its unique design accommodates a wide range of vehicles, including those with spoilers.
2. ຂໍ້ມູນຄວາມປອດໄພ
- Always ensure the rack is securely attached to the vehicle before loading bicycles.
- Do not exceed the maximum load capacity of 105 pounds (35 pounds per bike).
- Verify that all straps and bike hold-downs are tightened before and during transit.
- Check local regulations regarding bicycle rack usage and visibility of license plates/taillights.
- Avoid driving over rough terrain or at excessive speeds with bikes loaded.
- Periodically inspect the rack for wear, damage, or loose components.
3. ເນື້ອໃນຊຸດ
ກວດສອບວ່າອົງປະກອບຕໍ່ໄປນີ້ລວມຢູ່ໃນຊຸດຂອງທ່ານ:
- Saris Bones EX Trunk Rack (main unit)
- Wheel Straps (for securing bicycle wheels)
- Hatch Huggers (for vehicles with glass or composite hatch edges)
- Protect-O-Pads (protective pads for vehicle contact points)
ຮູບທີ 3.1: ເກີນview of the Saris Bones EX Trunk Rack and its bundled accessories, including wheel straps, hatch huggers, and protect-o-pads.
4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Follow these steps to properly install the Saris Bones EX on your vehicle's trunk or hatch.
- ການກະກຽມຍານພາຫະນະ: Clean the areas of your vehicle where the rack will make contact to prevent paint damage.
- ວາງຕຳແໜ່ງ Rack: Place the Saris Bones EX rack on the trunk or hatch of your vehicle. The unique "dog leg" design is intended to fit over most spoilers.
- Attach Protect-O-Pads: Apply the Protect-O-Pads to the rack's feet and any other contact points with the vehicle to cushion and protect the paint.
- Secure Top Straps: Attach the top straps to the upper edge of the trunk/hatch. For vehicles with glass or composite hatch edges, use the provided Hatch Huggers by inserting them into the gap and attaching the straps to them.
- Secure Side Straps: Attach the side straps to the side edges of the trunk/hatch.
- ສາຍຮັດດ້ານລຸ່ມທີ່ປອດໄພ: Attach the bottom straps to the lower edge of the trunk/hatch.
- Tighten All Straps: Systematically tighten all six straps (two top, two side, two bottom) until the rack is firmly secured to the vehicle and does not move. Ensure even tension.
- ກວດສອບຄັ້ງສຸດທ້າຍ: Gently shake the rack to confirm it is stable and securely mounted. Re-tighten straps if any movement is detected.
ຮູບທີ 4.1: The Protect-O-Pads are crucial for protecting your vehicle's paint at contact points with the rack.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
Once the rack is securely installed, follow these steps to load your bicycles:
- ກຽມລົດຖີບ: Remove any loose items from your bicycles (e.g., water bottles, pumps, bags).
- ໂຫຼດລົດຖີບຄັນທຳອິດ: Lift the first bicycle and place its top tube into the cradles on the rack. The arc-based design helps separate bikes.
- Secure Bike Frame: Use the premium bike hold-downs to firmly secure the bicycle frame to the rack. Ensure the bike is stable and does not sway.
- Secure Wheels: Use the provided Wheel Straps to secure the front and rear wheels of the bicycle, preventing them from spinning or moving during transit.
- ໂຫຼດລົດຖີບເພີ່ມເຕີມ: Repeat steps 2-4 for the remaining bicycles, ensuring proper spacing and security for each. The rack can carry up to three bikes.
- ກວດສອບຄັ້ງສຸດທ້າຍ: Before driving, gently shake each bike and the entire rack to confirm everything is secure. Re-tighten any loose straps or hold-downs.
6. ບໍາລຸງຮັກສາ
Regular maintenance ensures the longevity and safe operation of your Saris Bones EX rack.
- ທໍາຄວາມສະອາດ: Clean the rack periodically with mild soap and water. Avoid harsh chemicals that could damage plastic or rubber components.
- ການກວດກາ: Before each use, inspect all straps, buckles, and bike hold-downs for signs of wear, fraying, or damage. Check the rack's frame for cracks or bends.
- ການລະບາຍສີ: The pivot points of the rack do not typically require lubrication, but ensure they move freely.
- ການເກັບຮັກສາ: When not in use, store the rack in a dry, protected area away from direct sunlight and extreme temperatures to prevent material degradation.
7. ການແກ້ໄຂບັນຫາ
This section addresses common issues you might encounter with your Saris Bones EX rack.
- Rack is not stable on the vehicle:
- Ensure all six straps are correctly attached and tightened evenly.
- Verify that the rack's feet are making firm contact with the vehicle surface.
- Check vehicle compatibility. While the Bones EX fits many vehicles, some specific models may require alternative solutions.
- Bikes are swaying or not secure:
- Confirm that the bike hold-downs are fully engaged and tightened around the bike frames.
- Ensure Wheel Straps are used and tightened to prevent wheel movement.
- Adjust bike positioning on the cradles for better balance and stability.
- Paint damage on vehicle:
- Ensure Protect-O-Pads are correctly placed at all contact points.
- Always clean vehicle surfaces before installation to remove dirt or grit that could scratch paint.
- Avoid over-tightening straps, which can cause excessive pressure.
8. ຂໍ້ມູນຈໍາເພາະ
| ຕົວແບບ | Bones EX (803) |
| ຄວາມອາດສາມາດ | ລົດຖີບ 3 ຄັນ |
| ຄວາມອາດສາມາດໂຫຼດ | 105 ປອນ (35 ປອນຕໍ່ລົດຖີບ) |
| ປະເພດການຕິດຕັ້ງ | Trunk Mount, Strap Mount |
| ນ້ໍາຫນັກລາຍການ | 15 ປອນ |
| ຂະໜາດສິນຄ້າ (L x W x H) | 22 x 9 x 20 ນິ້ວ |
| ສີ | ດຳ |
| UPC | 843812192736 |
9. ຂໍ້ມູນການຮັບປະກັນ
Saris products are designed for durability and performance. For specific warranty details, including coverage period and terms, please refer to the official Saris website or contact Saris customer support directly. Keep your proof of purchase for warranty claims.
10. ການຊ່ວຍເຫຼືອລູກຄ້າ
If you have any questions, require assistance with installation, or need to report a problem, please contact Saris customer support:
- Webເວັບໄຊ: Visit the official Saris webເວັບໄຊສໍາລັບ FAQs, ການລົງທະບຽນຜະລິດຕະພັນ, ແລະຊັບພະຍາກອນສະຫນັບສະຫນູນ.
- ຕິດຕໍ່: Refer to the "Contact Us" section on the Saris webເວັບໄຊທ໌ສຳລັບເບີໂທລະສັບ ຫຼື ອີເມວສະໜັບສະໜູນ.
When contacting support, please have your product model (Bones EX) and part number (803Kit2) available.
