FTDI TTL-232R-3V3 USB to UART Cable User Manual

1. ບົດແນະນຳ

This manual provides comprehensive instructions for the FTDI TTL-232R-3V3 USB to UART cable. This cable offers a simple and reliable solution for connecting devices with +3.3V TTL level UART signals to a computer via a USB port. It is designed for engineers, hobbyists, and developers working with embedded systems, microcontrollers, and other serial communication applications.

2. ຂໍ້ມູນຄວາມປອດໄພ

• ໃຫ້ແນ່ໃຈວ່າ voltage levels (+3.3V) are maintained to prevent damage to connected devices.
• Do not expose the cable to extreme temperatures, moisture, or corrosive environments.
• Avoid bending or twisting the cable excessively, as this may damage internal wires.
• Disconnect the cable from both the computer and the target device before performing any maintenance or modifications.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ຊຸດ​ຂອງ​ທ່ານ​:

• 1 x FTDI TTL-232R-3V3 USB to UART Cable
• (Optional: Driver CD or link to driver download, if applicable. Refer to manufacturer's website for latest drivers.)

4. ຜະລິດຕະພັນເກີນview

The FTDI TTL-232R-3V3 is a USB to serial UART (Universal Asynchronous Receiver/Transmitter) converter cable. It provides a USB-A connector on one end and a 6-pin SIL (Single In-Line) connector with 0.1" pitch on the other, offering +3.3V TTL level signals. The cable integrates an FT232R IC, handling all USB signaling and protocols.

ຮູບທີ 1: FTDI TTL-232R-3V3 USB to UART Cable. This image shows the black USB-A connector on one end and the 6-pin header on the other, with the cable coiled.

4.1 ລາຍລະອຽດ Pinout

The 6-pin SIL connector provides the following signals:

Note: The VCC pin (Pin 3) provides +5V from the USB port, which can be used to power external circuitry up to 75mA. The data signals (TXD, RXD, CTS, RTS) operate at +3.3V TTL levels.

5. ຕັ້ງຄ່າ

5.1 ການຕິດຕັ້ງໄດເວີ

The FTDI TTL-232R-3V3 cable requires specific drivers to function correctly on your computer. These drivers are often automatically installed by modern operating systems (Windows 10/11, macOS, Linux) when the cable is first connected. If automatic installation fails, or for older operating systems, manual installation may be necessary.

1. ດາວໂຫລດໄດເວີ: Visit the official FTDI webເວັບໄຊ (www.ftdichip.com/Drivers/VCP.htm) to download the latest Virtual COM Port (VCP) drivers for your operating system.
2. ຕິດຕັ້ງໄດເວີ: Follow the instructions provided with the downloaded driver package. This typically involves running an executable file or following on-screen prompts.
3. ເຊື່ອມຕໍ່ສາຍ: Plug the USB-A end of the TTL-223R-3V3 cable into an available USB port on your computer.
4. ຢືນຢັນການຕິດຕັ້ງ:
   • Windows: Open Device Manager (search for "Device Manager" in the Start menu). Look under "Ports (COM & LPT)" for an entry like "USB Serial Port (COMx)", where 'x' is a number.
   • macOS: Open Terminal and type ls /dev/tty.usbserial*. You should see an entry corresponding to the cable.
   • Linux: Open Terminal and type ls /dev/ttyUSB*. You should see an entry corresponding to the cable.

5.2 Connecting to a Target Device

Connect the 6-pin SIL connector to your target device's UART interface. Ensure correct pin alignment:

• Connect the cable's TXD (Pin 4) to the target device's RXD.
• Connect the cable's RXD (Pin 5) to the target device's TXD.
• Connect the cable's GND (Pin 1) to the target device's GND.
• If hardware flow control is used, connect CTS (Pin 2) to target's RTS ແລະ RTS (Pin 6) to target's CTS.
• If powering the target device from the cable, connect the cable's VCC (Pin 3) to the target device's +5V input (ensure the target device can accept 5V and its current draw does not exceed 75mA).

ຂໍ້ຄວນລະວັງ: Always double-check the pinout of your target device to avoid damage due to incorrect connections.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

Once the drivers are installed and the cable is connected to your target device, you can use a serial terminal program to communicate.

1. Open Terminal Program: Use a serial terminal application such as PuTTY (Windows), CoolTerm (macOS/Windows), or Minicom/screen (Linux).
2. ເລືອກພອດ COM: In the terminal program settings, select the COM port number identified during driver installation (e.g., COM3, /dev/ttyUSB0).
3. Configure Serial Settings:
   • ອັດຕາ Baud: Set to match your target device's baud rate (e.g., 9600, 115200, up to 3MBaud).
   • ບິດຂໍ້ມູນ: ປົກກະຕິ 8
   • ຄວາມສະເີພາບ: ບໍ່ມີ
   • ຢຸດບິດ: ປົກກະຕິ 1
   • ການຄວບຄຸມການໄຫຼເຂົ້າ: None, or Hardware (RTS/CTS) if enabled on your target device.
4. ສ້າງ​ການ​ເຊື່ອມ​ຕໍ່​: Open the serial connection in your terminal program. You should now be able to send and receive data from your target device.

7. ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: ໃຊ້ຜ້າອ່ອນ, ແຫ້ງເພື່ອເຮັດຄວາມສະອາດສາຍເຄເບີນແລະຕົວເຊື່ອມຕໍ່. ຢ່າໃຊ້ນໍ້າສະອາດ ຫຼືສານລະລາຍ.
• ການເກັບຮັກສາ: Store the cable in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tangling the cable.
• ການກວດກາ: Periodically inspect the cable for any signs of damage, such as frayed wires, bent pins, or cracked insulation. Discontinue use if damage is found.

8. ການແກ້ໄຂບັນຫາ

8.1 ບັນຫາທົ່ວໄປ ແລະການແກ້ໄຂ

• No COM Port Detected:
  • Ensure drivers are correctly installed (refer to Section 5.1).
  • ລອງໃຊ້ພອດ USB ອື່ນໃນຄອມພິວເຕີຂອງທ່ານ.
  • ປິດເປີດຄອມພິວເຕີຂອງທ່ານຄືນໃໝ່.
  • Check the cable for physical damage.
• ບໍ່ມີການສົ່ງ/ຮັບຂໍ້ມູນ:
  • Verify the pinout connections between the cable and your target device (TXD to RXD, RXD to TXD, GND to GND).
  • Confirm that the serial settings (baud rate, data bits, parity, stop bits, flow control) in your terminal program match those of your target device.
  • Ensure the target device is powered on and functioning correctly.
  • Check if the target device's UART is enabled and configured.
• ການເຊື່ອມຕໍ່ແບບບໍ່ຢຸດຢັ້ງ:
  • Check for loose connections at both the USB and 6-pin ends.
  • ຫຼີກເວັ້ນການແຊກແຊງໄຟຟ້າຈາກອຸປະກອນອື່ນໆ.
  • Ensure the cable is not excessively bent or stressed.

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the official FTDI website or contact your point of purchase. FTDI provides extensive documentation and support resources for their products.

• FTDI Webເວັບໄຊ: www.ftdichip.com
• ການສະໜັບສະໜູນຜູ້ຂັບຂີ່: www.ftdichip.com/Drivers/VCP.htm