ແນະນຳ
This manual provides essential instructions for the safe operation, setup, maintenance, and troubleshooting of your FLEX 24V Brushless Cordless Oscillating Multi-Tool Kit, model FX4111-1A. This versatile tool is designed for cutting, trimming, plunging, sanding, grinding, and scraping applications. Please read this manual thoroughly before using the tool to ensure proper and safe operation.
ຂໍ້ມູນຄວາມປອດໄພ
ປະຕິບັດຕາມຄວາມລະມັດລະວັງດ້ານຄວາມປອດໄພຂັ້ນພື້ນຖານສະເໝີ ເພື່ອຫຼຸດຜ່ອນຄວາມສ່ຽງຕໍ່ການເກີດອັກຄີໄພ, ການຊ໊ອກໄຟຟ້າ ແລະ ການບາດເຈັບສ່ວນບຸກຄົນເມື່ອໃຊ້ເຄື່ອງມືໄຟຟ້າ.
- ຄວາມປອດໄພໃນພື້ນທີ່ເຮັດວຽກ: ຮັກສາພື້ນທີ່ເຮັດວຽກໃຫ້ສະອາດ ແລະ ມີແສງສະຫວ່າງດີ. ພື້ນທີ່ວຸ້ນວາຍ ຫຼືບ່ອນມືດພາໃຫ້ເກີດອຸປະຕິເຫດ. ຫ້າມໃຊ້ເຄື່ອງມືໄຟຟ້າໃນບັນຍາກາດທີ່ລະເບີດ, ເຊັ່ນໃນທີ່ປະທັບຂອງຂອງແຫຼວ, ອາຍແກັສ, ຫຼືຝຸ່ນ.
- ຄວາມປອດໄພທາງໄຟຟ້າ: ຫຼີກເວັ້ນການສໍາຜັດກັບຮ່າງກາຍກັບພື້ນດິນຫຼືຫນ້າດິນ. ຫ້າມບໍ່ໃຫ້ເຄື່ອງໃຊ້ໄຟຟ້າຖືກຝົນ ຫຼືສະພາບທີ່ປຽກ.
- ຄວາມປອດໄພສ່ວນຕົວ: ໃສ່ເຄື່ອງປ້ອງກັນຕາສະເໝີ. ໃຊ້ການປ້ອງກັນການໄດ້ຍິນໃນເວລາທີ່ໃຊ້ເຄື່ອງມືສໍາລັບການຂະຫຍາຍໄລຍະເວລາ. ແຕ່ງຕົວໃຫ້ຖືກຕ້ອງ; ຫຼີກລ້ຽງການນຸ່ງຫົ່ມຫຼືເຄື່ອງປະດັບ. ຮັບປະກັນຜົມຍາວ.
- ການນໍາໃຊ້ແລະການດູແລເຄື່ອງມື: ຢ່າບັງຄັບເຄື່ອງມືພະລັງງານ. ໃຊ້ເຄື່ອງມືພະລັງງານທີ່ຖືກຕ້ອງສໍາລັບຄໍາຮ້ອງສະຫມັກຂອງທ່ານ. ຖອດຊຸດແບັດເຕີລີ່ອອກຈາກເຄື່ອງມືໄຟຟ້າກ່ອນທີ່ຈະເຮັດການປັບປ່ຽນ, ປ່ຽນອຸປະກອນເສີມ, ຫຼືເກັບຮັກສາເຄື່ອງມືພະລັງງານ.
- ການນໍາໃຊ້ແລະການດູແລເຄື່ອງມືຫມໍ້ໄຟ: ເຕີມເງິນດ້ວຍເຄື່ອງສາກທີ່ລະບຸໂດຍຜູ້ຜະລິດເທົ່ານັ້ນ. ໃຊ້ເຄື່ອງມືພະລັງງານກັບຊຸດຫມໍ້ໄຟທີ່ກໍານົດໂດຍສະເພາະ.
ເນື້ອໃນຊຸດ
ກວດສອບວ່າລາຍການທັງຫມົດແມ່ນມີຢູ່ໃນການຍົກເລີກການຫຸ້ມຫໍ່:
- FLEX 24V Brushless Cordless Oscillating Multi-Tool (FX4111-1A)
- ແບດເຕີຣີ້ມາດຕະຖານ 2.5Ah Lithium-ion
- ເຄື່ອງສາກໄວ 160W
- ຄູ່ມືການສອນ
- Carrying Bag (as depicted in product images)
- Initial Oscillating Blade (may vary)
ຮູບທີ 1: The FLEX 24V Brushless Cordless Oscillating Multi-Tool Kit, including the multi-tool, a 2.5Ah battery, a 160W fast charger, and a carrying bag.
ຄຸນສົມບັດຜະລິດຕະພັນ
The FLEX 24V Oscillating Multi-Tool incorporates several advanced features for enhanced performance and user experience:
- FLEX Advantage: Utilizes 24V lithium battery technology for increased power, extended runtime with THERMA-TECH heat management, and faster charging capabilities.
- Sensor-Free Brushless Motor: Designed for higher efficiency and power by eliminating friction.
- Fast Cutting: Achieves up to 20,000 Oscillations Per Minute (OPM) for efficient material removal.
- Vibration Suppression: Advanced system to isolate the tool and user from excessive vibration, improving comfort and control.
- 3D Starlock Connection: Maximizes power transfer from the motor to the blade for optimal oscillating efficiency.
- Keyless Blade Eject: Facilitates quick and easy blade changes without direct contact with potentially hot blades.
- ໄຟ LED: Integrated lighting to illuminate dark work areas, enhancing visibility.
- ຄວາມເຂົ້າກັນໄດ້ຂ້າມ FLEX 24V: The included 2.5Ah Lithium-Ion Battery and 160W Fast Charger are compatible with all FLEX 24V tools.
ຮູບທີ 2: Illustration of the FLEX Advantage, detailing the benefits of the 24V lithium battery system.
ຮູບທີ 3: The multi-tool in operation, demonstrating its fast cutting capability at 20,000 OPM.
ຮູບທີ 4: The multi-tool being used, highlighting its vibration suppression technology for user comfort.
ຮູບທີ 5: ລາຍລະອຽດ view of the 3D Starlock connection, designed for maximum power transfer to the blade.
ຮູບທີ 6: The keyless blade eject mechanism in action, allowing for quick and safe blade changes.
ຮູບທີ 7: The integrated LED light on the multi-tool, providing illumination for dark work areas.
ຕັ້ງຄ່າ
1. ການສາກແບັດເຕີຣີ
- Connect the 160W Fast Charger to a standard power outlet.
- Slide the 2.5Ah Lithium-Ion Battery onto the charger until it clicks into place.
- ຕິດຕາມກວດກາໄຟສະແດງໃຫ້ເຫັນຂອງການສາກໄຟສໍາລັບສະຖານະການສາກໄຟ. ການສາກໄຟເຕັມຈະສະແດງເມື່ອໄຟທັງໝົດເປັນສີຂຽວແຂງ.
- ເມື່ອສາກເຕັມແລ້ວ, ເອົາແບັດເຕີຣີອອກຈາກເຄື່ອງສາກ.
2. Installing/Changing Blades
- Ensure the tool is switched off and the battery pack is removed before installing or changing accessories.
- Locate the 3D Starlock connection on the tool head.
- Align the accessory (blade, sanding pad, etc.) with the Starlock connection.
- Press the accessory firmly onto the connection until it clicks securely into place. The 3D Starlock system ensures a tight fit and optimal power transfer.
- To remove an accessory, activate the Keyless Blade Eject mechanism (refer to your tool's specific design for the lever or button) and pull the accessory away from the tool head.
ຄໍາແນະນໍາການດໍາເນີນງານ
1. ເປີດ / ປິດພະລັງງານ
- Insert a charged 24V battery pack into the tool handle until it locks.
- To turn the tool ON, slide the power switch to the 'ON' position or depress the trigger, depending on the tool's design.
- To turn the tool OFF, release the trigger or slide the power switch to the 'OFF' position.
2. ປັບຄວາມໄວ
The tool features variable speed control, allowing adjustment of OPM (Oscillations Per Minute) for different applications. Locate the speed adjustment dial or switch on the tool and set it to the desired speed. Lower speeds are suitable for delicate work or softer materials, while higher speeds are for aggressive material removal.
3. ບົດແນະນຳການດຳເນີນງານທົ່ວໄປ
- ການຕັດ: Select the appropriate blade for the material. Apply light, consistent pressure. Allow the tool to do the work; do not force it.
- ຂັດ: Attach a sanding pad and appropriate grit sandpaper. Move the tool in a consistent pattern across the surface to achieve an even finish.
- ການຂູດ: Use a scraping blade. Hold the tool at a shallow angle to the surface and apply steady pressure to remove material.
- ໄຟ LED: The integrated LED light activates when the tool is in operation, providing illumination for the work area.
ບໍາລຸງຮັກສາ
ການບໍາລຸງຮັກສາເປັນປົກກະຕິຮັບປະກັນການປະຕິບັດທີ່ດີທີ່ສຸດແລະຍືດອາຍຸຂອງເຄື່ອງມືຂອງທ່ານ.
- ທໍາຄວາມສະອາດ: ຫຼັງຈາກການນໍາໃຊ້ແຕ່ລະຄັ້ງ, ທໍາຄວາມສະອາດເຄື່ອງມືທີ່ມີນ້ໍາ, damp cloth. Remove any dust or debris from ventilation openings. Do not use harsh chemicals or abrasive cleaners.
- ການກວດກາແຜ່ນໃບ: Regularly inspect blades and accessories for wear or damage. Replace worn or dull blades to maintain cutting efficiency and safety.
- ການດູແລຫມໍ້ໄຟ: ເກັບຮັກສາຫມໍ້ໄຟໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງ. ຢ່າເກັບແບັດເຕີລີທີ່ປ່ອຍປະໄວ້ໃຫ້ເຕັມທີ່ເປັນເວລາດົນ.
- ການເກັບຮັກສາ: Store the tool, battery, and charger in a dry, secure location out of reach of children.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ເຄື່ອງມືບໍ່ເລີ່ມຕົ້ນ. | ບໍ່ໄດ້ສາກແບັດ ຫຼືໃສ່ເຂົ້າບໍ່ຖືກຕ້ອງ. | ຮັບປະກັນວ່າແບັດເຕີຣີໄດ້ສາກເຕັມ ແລະ ນັ່ງຢ່າງຖືກຕ້ອງຢູ່ໃນເຄື່ອງມື. |
| Reduced cutting/sanding performance. | Dull or incorrect blade/accessory. Excessive pressure. | Replace blade/accessory. Ensure correct accessory for material. Apply lighter pressure. |
| ການສັ່ນສະເທືອນຫຼາຍເກີນໄປ. | Accessory not properly secured. Damaged accessory. | Check that the accessory is securely attached. Replace any damaged accessories. |
| ແບັດເຕີຣີບໍ່ໄດ້ສາກ. | Charger not plugged in. Damaged battery or charger. | Verify charger is plugged into a live outlet. Inspect battery and charger for damage. Contact support if damaged. |
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | FX4111-1A |
| ຍີ່ຫໍ້ | FLEX |
| ສະບັບtage | 24 ໂວນ |
| ປະເພດມໍເຕີ | ບໍ່ມີແປງ |
| Oscillations ຕໍ່ນາທີ (OPM) | ເຖິງ 20,000 |
| ປະເພດຫມໍ້ໄຟ | ລິດ-ໄອອອນ |
| ຄວາມອາດສາມາດຫມໍ້ໄຟ | 2.5Ah (ລວມ) |
| Charger Output | 160W Fast Charger (included) |
| Blade Connection | 3D Starlock |
| ນ້ໍາຫນັກລາຍການ | 10.3 pounds (Tool with battery) |
| ແຫຼ່ງພະລັງງານ | ພະລັງງານຫມໍ້ໄຟ |
| UPC | 840163200165 |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
The FLEX 24V Brushless Cordless Oscillating Multi-Tool Kit is protected by the FLEX Limited Lifetime Warranty. To activate this warranty, you must register your new FLEX tool, battery, or charger within 30 days of purchase. Registration can be completed online at registermyFLEX.com. This offer is valid for purchases made through December 31, 2025.
For further assistance, technical support, or warranty claims, please refer to the official FLEX webເວັບໄຊ ຫຼືຕິດຕໍ່ພະແນກບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າ.
