1. ບົດແນະນຳ
Thank you for choosing the CREWORKS 38x38cm Digital Control Heat Press Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new heat press. Please read these instructions thoroughly before use and retain them for future reference.
2. ຄໍາແນະນໍາຄວາມປອດໄພ
- ໃຫ້ເຊື່ອມຕໍ່ເຄື່ອງເຂົ້າກັບປລັກໄຟຟ້າທີ່ມີສາຍດິນສະເໝີ.
- Keep hands and clothing clear of the heating plate during operation to prevent burns. The machine operates at high temperatures.
- Do not operate the machine in wet conditions or with wet hands.
- ຮັບປະກັນການລະບາຍອາກາດທີ່ພຽງພໍໃນພື້ນທີ່ເຮັດວຽກ.
- ຖອດປລັກເຄື່ອງອອກຈາກແຫຼ່ງພະລັງງານເມື່ອບໍ່ໄດ້ໃຊ້ງານ ຫຼື ກ່ອນການທຳຄວາມສະອາດ ແລະ ການບຳລຸງຮັກສາ.
- ຢ່າພະຍາຍາມດັດແປງ ຫຼື ສ້ອມແປງເຄື່ອງຈັກດ້ວຍຕົວທ່ານເອງ. ຕິດຕໍ່ພະນັກງານບໍລິການທີ່ມີຄຸນວຸດທິເພື່ອຂໍຄວາມຊ່ວຍເຫຼືອ.
- The machine features an automatic shut-off after 30 minutes of inactivity for enhanced safety.
3. ອົງປະກອບຂອງຜະລິດຕະພັນ
Familiarize yourself with the main parts of your heat press machine:
- ມືຈັບ: For opening and closing the heating plate.
- ປຸ່ມປັບຄວາມດັນ: To set the desired pressure for transfers.
- Digital Control Display: Shows and allows adjustment of temperature and time.
- ແຜ່ນເຮັດຄວາມຮ້ອນ: The upper plate that heats up and applies pressure.
- ຜ້າປູທີ່ທົນຄວາມຮ້ອນ: Placed on the base plate to protect materials.
- Pull-out Base Plate: The lower plate where items are placed, designed to slide out for easy loading.
- ສັບປ່ຽນພະລັງງານ: To turn the machine on/off.
4. ຕັ້ງຄ່າ
- ແກະກ່ອງ: ເອົາສ່ວນປະກອບທັງຫມົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ.
- ການຈັດວາງ: Place the heat press on a stable, heat-resistant surface in a well-ventilated area. Ensure there is enough space around the machine for safe operation.
- ການເຊື່ອມຕໍ່ພະລັງງານ: ເຊື່ອມຕໍ່ສາຍໄຟກັບປລັກໄຟຟ້າທີ່ມີດິນ.
- ການກວດກາເບື້ອງຕົ້ນ: Before first use, inspect the machine for any visible damage.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
5.1. ກະດານຄວບຄຸມຫຼາຍກວ່າview
The digital control panel allows precise adjustment of temperature and time:
- ການຕັ້ງຄ່າອຸນຫະພູມ: Adjustable from 0-250°C (0-480°F). Use the '+' and '-' buttons to set the desired temperature.
- ການຕັ້ງຄ່າເວລາ: Adjustable from 1-999 seconds. Use the '+' and '-' buttons to set the desired time.
- ປຸ່ມໂໝດ: To switch between temperature and time settings.
5.2. ການປັບຄວາມກົດດັນ
The pressure adjustment knob on top of the heating plate allows you to customize the pressing force for different materials and transfer types.
- ຫັນຕາມເຂັມໂມງເພື່ອເພີ່ມຄວາມກົດດັນ.
- Turn counter-clockwise to decrease pressure.
5.3. Heat Transfer Process
- ເປີດເຄື່ອງໂດຍໃຊ້ສະວິດໄຟ.
- Set the desired temperature and time using the digital control panel. Allow the machine to preheat until the set temperature is reached.
- Pull out the base plate using the handle.
- Place your material (e.g., T-shirt) onto the heat-resistant mat on the pull-out base. Ensure it is flat and smooth.
- Position your transfer design (e.g., HTV, sublimation paper) onto the material.
- Slide the base plate back into position.
- Lower the heating plate using the handle until it locks into place, applying pressure.
- The timer will start automatically. Once the time elapses, the machine will beep.
- Lift the heating plate using the handle.
- Carefully pull out the base plate and remove your transferred item. Be cautious as the item will be hot.
5.4. ຄໍາຮ້ອງສະຫມັກອະເນກປະສົງ
This heat press is suitable for various items and materials:
5.5. Even Heat Distribution
The machine features dual heating tubes for efficient and uniform heat transfer across the entire 38x38cm plate.
5.6. ວິດີໂອຜະລິດຕະພັນຢ່າງເປັນທາງການ
6. ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: Ensure the machine is unplugged and completely cooled before cleaning. Wipe the heating plate with a soft, damp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- ການເກັບຮັກສາ: ເກັບຮັກສາເຄື່ອງອັດຄວາມຮ້ອນໄວ້ໃນສະພາບແວດລ້ອມແຫ້ງ ແລະ ບໍ່ມີຝຸ່ນເມື່ອບໍ່ໄດ້ໃຊ້ງານ.
- ກວດກາປົກກະຕິ: ກວດເບິ່ງທຸກສະກູແລະການເຊື່ອມຕໍ່ເປັນໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນປອດໄພ.
7. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ເຄື່ອງບໍ່ເປີດ | ບໍ່ໄດ້ເຊື່ອມຕໍ່ສາຍໄຟ; ສະວິດໄຟປິດ; ບັນຫາປລັກໄຟ | Check power cord connection; Turn on power switch; Test outlet with another device |
| Uneven heat transfer | Incorrect pressure; Heating plate not fully closed; Faulty heating element | Adjust pressure knob; Ensure plate is fully closed; Contact support if issue persists |
| Design not adhering | Incorrect temperature/time; Insufficient pressure; Wrong material type | Adjust temperature/time settings; Increase pressure; Verify material compatibility with transfer type |
8. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຕົວແບບ | 38x38cm Heat Press |
| ຍີ່ຫໍ້ | ຊ່າງ |
| ພະລັງງານ | 1400W |
| ຂະ ໜາດ Platen | 38x38ຊມ |
| ຊ່ວງອຸນຫະພູມ | 0-250°C (0-480°F) |
| ຊ່ວງເວລາຈັບເວລາ | 1-999 ວິນາທີ |
| ຂະໜາດ (L x W x H) | 38.5 x 42 x 46.5 cm |
| ນ້ຳໜັກ | 17 ກິໂລ |
| ອົງປະກອບຂອງວັດສະດຸ | Metal, Aluminum, Silicone |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
ສຳລັບຂໍ້ມູນການຮັບປະກັນ ແລະ ການສະໜັບສະໜູນລູກຄ້າ, ກະລຸນາອ້າງອີງເອກະສານການຊື້ ຫຼື ຕິດຕໍ່ຮ້ານຄ້າປີກຂອງທ່ານ. ເກັບຫຼັກຖານການຊື້ຂອງທ່ານໄວ້ສຳລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.
