VIOFO HK5

VIOFO HK5 ACC Hardwire Cable Instruction Manual

For VIOFO VS1 Dash Cam

1. ບົດແນະນຳ

The VIOFO HK5 ACC Hardwire Cable is designed to provide continuous power to your VIOFO VS1 dash cam, enabling advanced parking surveillance features and protecting your vehicle's battery from discharge. This manual provides essential information for proper installation and operation.

VIOFO HK5 ACC Hardwire Cable with USB-C connector and bare wire ends.
Image 1: VIOFO HK5 ACC Hardwire Cable. This cable connects your dash cam directly to your vehicle's power system for continuous operation.

2. ຜະລິດຕະພັນເກີນview

The HK5 ACC Hardwire Cable consists of a USB-C connector for the dash cam, a control box with voltage regulation, and three bare wire leads for connection to your vehicle's electrical system.

Diagram of VIOFO HK5 ACC Hardwire Cable components, showing the USB-C end, control box, and three bare wire leads (red, yellow, black).
Image 2: Components of the HK5 ACC Hardwire Cable. The cable includes a USB-C output, a voltage control module, and input wires for battery, ACC, and ground.

2.1 ຄວາມເຂົ້າກັນໄດ້

The VIOFO HK5 ACC Hardwire Cable is specifically designed for use with the VIOFO VS1 Dash Cam.

Comparison table of VIOFO hardwire kits (HK3, HK3-C, HK4, HK5) showing applicable models, connector types, input voltage, input interface, and cable length.
Image 3: VIOFO Hardwire Kit Compatibility Chart. This table details the compatibility of various VIOFO hardwire kits with different dash cam models, connector types, input, and length specifications.
VIOFO Hardwire Kit Comparison
ຄຸນສົມບັດHK5
ຮູບແບບທີ່ນຳໃຊ້ໄດ້VS1
ພອດຕົວເຊື່ອມຕໍ່USB Type-C
ປ້ອນຂໍ້ມູນ12-24V
ອິນເຕີເຟດຂາເຂົ້າACC (ສີເຫຼືອງ), ດິນ (ສີດໍາ), ຫມໍ້ໄຟ (ສີແດງ)
ຄວາມຍາວ13.1ft (4M)

3. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Proper installation is crucial for the functionality of the hardwire cable and the safety of your vehicle's electrical system. It is recommended to consult a professional if you are unsure about any steps.

3.1 ການເຊື່ອມຕໍ່ສາຍໄຟ

The HK5 hardwire cable features three distinct wires for connection:

  • Red Battery Cable: Connect this to a constant power source in your vehicle's fuse box. This circuit should provide power even when the ignition is off.
  • Yellow ACC Cable: Connect this to an ignition-switched power source in your vehicle's fuse box. This circuit should only provide power when the vehicle's engine is on.
  • Black Ground Cable: Connect this to a metal part of the vehicle's chassis, ensuring a secure ground connection.

Note: Fuse taps are NOT included with the HK5 hardwire cable. You will need to acquire two appropriate fuse taps (one for the red cable, one for the yellow cable) that match your vehicle's fuse type.

Wiring diagram for VIOFO HK5 ACC Hardwire Cable showing connections for Battery (red), ACC (yellow), and Ground (black).
Image 4: Wiring Diagram. This diagram illustrates how to connect the red (battery), yellow (ACC), and black (ground) wires to your vehicle's electrical system.

3.2 ເສັ້ນທາງສາຍໄຟ

The hardwire cable has a length of 13.1 feet (4 meters), allowing for flexible routing within most vehicles. Route the cable discreetly along the vehicle's headliner, A-pillar, and dashboard to the fuse box location. Ensure the cable does not interfere with airbags or other safety features.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

4.1 Automatic Parking Mode

The HK5 ACC Hardwire Cable enables automatic switching to parking mode for your VS1 dash cam. When the vehicle's engine is turned off, the dash cam will automatically enter parking mode, providing continuous surveillance. When the engine is started, the dash cam will automatically switch back to normal recording mode.

Image showing the VIOFO HK5 ACC Hardwire Cable in a parking lot setting, illustrating its use for parking surveillance.
Image 5: Parking Mode Surveillance. The hardwire cable provides continuous power for parking mode, monitoring your vehicle when the engine is off.

4.2 Vol ຕ່ໍາtage ການປົກປ້ອງ

To prevent your vehicle's battery from being drained, the HK5 hardwire cable features low voltage protection. You can configure a voltage cut-off value using the switch on the control box. If the vehicle's battery voltage drops below the selected cut-off value, the hardwire cable will automatically stop supplying power to the dash cam, protecting your battery from excessive discharge.

Close-up of the VIOFO HK5 control box showing voltage cut-off settings for 12V and 24V systems.
Image 6: Configurable Voltage Cut-off. The control box allows selection of voltage cut-off levels to protect your vehicle's battery.

ສະບັບທີ່ມີຢູ່tage cut-off options are:

  • For 12V systems: 11.8V, 12.0V, 12.2V, 12.4V
  • For 24V systems: 23.6V, 24.0V, 24.4V, 24.8V

ເລືອກເອົາ vol ທີ່ເຫມາະສົມtage cut-off based on your vehicle's battery type and desired protection level.

5. ບໍາລຸງຮັກສາ

To ensure optimal performance and longevity of your VIOFO HK5 ACC Hardwire Cable:

  • Periodically inspect all connections to ensure they remain secure and free from corrosion.
  • Ensure the cable is not pinched or exposed to excessive heat or sharp edges.
  • Keep the control box free from dirt and moisture.

6. ການແກ້ໄຂບັນຫາ

  • Dash cam does not power on in parking mode: Verify that the red battery cable is connected to a constant power source and that the fuse tap is correctly installed and functional. Check the voltage cut-off setting; if the battery voltage is below the set value, the cable will not supply power.
  • Dash cam does not switch to normal recording: Ensure the yellow ACC cable is connected to an ignition-switched power source and that its fuse tap is correctly installed.
  • ແບັດເຕີຣີໝົດໄວ: Review ສະບັບຂອງທ່ານtage cut-off setting. A lower cut-off value allows the dash cam to draw power for longer, potentially draining the battery more. Consider increasing the cut-off voltage.
  • No power to dash cam: Check all three connections (red, yellow, black) for secure contact. Inspect the fuse taps and fuses for any damage or blown fuses.

7. ຂໍ້ມູນຈໍາເພາະ

VIOFO HK5 ACC Hardwire Cable Specifications
ຄຸນສົມບັດຂໍ້ມູນຈໍາເພາະ
ໝາຍເລກຕົວແບບHK5
ອຸປະກອນທີ່ເຂົ້າກັນໄດ້VIOFO VS1 Dash Cam
ປະເພດຕົວເຊື່ອມຕໍ່USB Type-C
ປະເພດສາຍUSB Hardwire
ການປ້ອນຂໍ້ມູນ VoltageDC 12-24V
ຜົນໄດ້ຮັບ Voltage/ປັດຈຸບັນDC 5V / 2A ສູງສຸດທີ່ເຄຍ
ຄວາມຍາວສາຍ13.1 ຟຸດ (4 ມ)
ຄຸນນະສົມບັດພິເສດຕ່ ຳtage Protection, ACC Detection
ຂະໜາດແພັກເກັດ5 x 3.23 x 2.01 ນິ້ວ
ນ້ໍາຫນັກລາຍການ5.93 ອອນ
ຜູ້ຜະລິດວີໂອເອ
A white car parked in a large parking area, illustrating the compatibility of the hardwire kit with various vehicle types.
Image 7: 12/24V Compatibility. The HK5 ACC Hardwire Cable is compatible with vehicles operating on 12V or 24V systems.

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

VIOFO is committed to providing reliable products and excellent customer service.

  • ຮັບປະກັນການຄືນເງິນ 30 ວັນ: ຖ້າທ່ານບໍ່ພໍໃຈກັບການຊື້ຂອງທ່ານ, ທ່ານອາດຈະມີສິດໄດ້ຮັບເງິນຄືນພາຍໃນ 30 ມື້.
  • ການຮັບປະກັນ 24 ເດືອນ: The HK5 ACC Hardwire Cable comes with an extended 24-month warranty.
  • ການຊ່ວຍເຫຼືອລູກຄ້າທີ່ອຸທິດຕົນ: VIOFO offers 24/7 customer support for any inquiries or assistance you may need.

8.1 ຂໍ້ມູນຕິດຕໍ່

For support, please contact VIOFO:

  • ອີເມວ: support@viofo.com
  • ໂທລະສັບ (ສະຫະລັດ): +1 323 505 9898

ເອກະສານທີ່ກ່ຽວຂ້ອງ - HK5

ກ່ອນview VIOFO HK4 ຄູ່ມືຜູ້ໃຊ້ສາຍ Hardwire - ການຕິດຕັ້ງແລະຂໍ້ມູນຈໍາເພາະ
ຄູ່​ມື​ການ​ນໍາ​ໃຊ້​ທີ່​ສົມ​ບູນ​ແບບ​ສໍາ​ລັບ VIOFO HK4 Hardwire Cable​, ລາຍ​ລະ​ອຽດ​ຂັ້ນ​ຕອນ​ການ​ຕິດ​ຕັ້ງ​, ຄຸນ​ນະ​ສົມ​ບັດ​, ສະ​ເພາະ​, ແລະ​ສະ​ຫນັບ​ສະ​ຫນູນ​ລູກ​ຄ້າ​ສໍາ​ລັບ VIOFO USB Type-C plug dash cams​.
ກ່ອນview VIOFO HK6 ຄູ່​ມື​ການ​ນໍາ​ໃຊ້​ສາຍ Hardwire: ການ​ຕິດ​ຕັ້ງ & ຄຸນ​ນະ​ສົມ​ບັດ​ສໍາ​ລັບ USB Type-C Dash Cams
ຕິດຕັ້ງ ແລະໃຊ້ສາຍເຄເບີນ VIOFO HK6 Hardwire ຂອງທ່ານດ້ວຍຄູ່ມືຜູ້ໃຊ້ທີ່ສົມບູນແບບນີ້. ຮຽນ​ຮູ້​ກ່ຽວ​ກັບ​ຮູບ​ແບບ​ການ​ຈອດ​ລົດ​, voltage cut-off, battery monitoring, and step-by-step installation for VIOFO USB Type-C dash cameras.
ກ່ອນview VIOFO VS1 Dash Camera ຄູ່ມືຜູ້ໃຊ້ ແລະຄູ່ມືການຕິດຕັ້ງ
ຄູ່ມືທີ່ສົມບູນແບບໃນການຕິດຕັ້ງ, ການຕັ້ງຄ່າ, ແລະການນໍາໃຊ້ກ້ອງຖ່າຍຮູບ dash VIOFO VS1, ລວມທັງລາຍລະອຽດກ່ຽວກັບ VIOFO APP ແລະຊຸດຮາດແວ HK4.
ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ຊຸດ Hardwire VIOFO HK3-C: ການຕິດຕັ້ງ ແລະ ຄຸນສົມບັດຕ່າງໆ
ຄູ່ມືຜູ້ໃຊ້ທີ່ຄົບຖ້ວນສຳລັບຊຸດສາຍແຂງ VIOFO HK3-C, ລາຍລະອຽດຂັ້ນຕອນການຕິດຕັ້ງ, ຄຸນສົມບັດຕ່າງໆເຊັ່ນ: ໂໝດຈອດລົດ ແລະ ລະດັບສຽງຕ່ຳtagຈຸດຕັດ, ສະເປັກ, ແລະ ການສະໜັບສະໜູນລູກຄ້າສຳລັບກ້ອງຕິດລົດ VIOFO A139.
ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ກ້ອງວົງຈອນປິດ VIOFO VS1: ການຕິດຕັ້ງ, ການໃຊ້ງານ ແລະ ການຕັ້ງຄ່າ
Explore the VIOFO VS1 dash cam user manual for detailed instructions on installation, recording modes (loop, emergency, parking), video playback, smartphone connectivity, and system settings. Enhance your driving experience with VIOFO.
ກ່ອນview VIOFO A139 Dash Cam ຄູ່ມືຜູ້ໃຊ້
ຄູ່ມືຜູ້ໃຊ້ທີ່ຄົບຖ້ວນສຳລັບກ້ອງວົງຈອນປິດ VIOFO A139, ລາຍລະອຽດການຕິດຕັ້ງ, ການດຳເນີນງານ, ການຕັ້ງຄ່າລະບົບ, ການອັບເກຣດເຟີມແວ ແລະ ການເຊື່ອມຕໍ່ແອັບສະມາດໂຟນ ເພື່ອການບັນທຶກການຂັບຂີ່ທີ່ດີທີ່ສຸດ ແລະ ຄວາມປອດໄພ.