1. ບົດແນະນຳ
This manual provides detailed instructions for the installation, operation, and maintenance of your ELUTENG M.2 NVMe/SATA SSD Enclosure. This device is designed to convert M.2 NVMe or SATA SSDs into a portable external storage solution, offering high-speed data transfer and broad compatibility.
2. ເນື້ອໃນຊຸດ
ກະລຸນາກວດສອບວ່າລາຍການທັງໝົດມີຢູ່ໃນຊຸດຂອງທ່ານ:
- ELUTENG M.2 NVMe/SATA SSD Enclosure
- 2-in-1 USB Type-C Cable (USB-C to USB-A and USB-C to USB-C)
- ແຜ່ນຄວາມຮ້ອນ
- ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
3. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຕົວແບບ | M.2 SATA/NVME Enclosure |
| ການໂຕ້ຕອບ | USB 3.2 Gen 2 Type-C |
| ອັດຕາການໂອນຂໍ້ມູນ | Up to 10Gbps (NVMe SSD), Up to 5Gbps (SATA SSD) |
| Supported SSD Types | M.2 NVMe M Key / B+M Key, M.2 NGFF SATA B+M Key |
| ຂະໜາດ SSD ທີ່ຮອງຮັບ | 2230, 2242, 2260, 2280 |
| ຄວາມອາດສາມາດສູງສຸດ | 4TB |
| ຊິບເຊັດ | RTL9210B (Supports UASP, Trim) |
| ວັດສະດຸ | ໂລຫະປະສົມອາລູມິນຽມ |
| ຂະໜາດ | ປະມານ 4.92 x 2.83 x 0.67 ນິ້ວ |
| ນ້ຳໜັກ | ປະມານ 60 ກຣາມ (2.12 ອອນສ໌) |
| ຄວາມເຂົ້າກັນໄດ້ຂອງ OS | Windows 7/8/10/11, Mac OS, Linux, iOS, Android |
| ຄວາມເຂົ້າກັນໄດ້ຂອງອຸປະກອນ | PC, Smartphone, Tablet, Smart TV, Smart Router, PS4 |
4. ຄູ່ມືການຕິດຕັ້ງ
4.1 ການຕິດຕັ້ງ SSD
ປະຕິບັດຕາມຂັ້ນຕອນເຫຼົ່ານີ້ເພື່ອຕິດຕັ້ງ M.2 SSD ຂອງທ່ານໃສ່ໃນ enclosure:
- ເປີດ Enclosure ໄດ້: Push the switch on the side of the enclosure and slide out the inner frame.
- ໃສ່ SSD: Carefully insert your M.2 NVMe or SATA SSD into the slot on the inner frame, aligning it with the card position. Ensure the SSD is fully seated.
- SSD ທີ່ປອດໄພ: Install the provided fixing buckle (plastic push-pin) to secure the SSD in place. Rotate it 90 degrees counter-clockwise to lock.
- ໃຊ້ແຜ່ນຄວາມຮ້ອນ: Place the thermal pad onto the SSD chips to aid in heat dissipation.
- ປິດ Enclosure: Slide the inner frame back into the aluminum alloy shell until it clicks securely into place.
4.2 ການເຊື່ອມຕໍ່ກັບອຸປະກອນ
Use the included 2-in-1 USB Type-C cable to connect the enclosure to your computer or other compatible device. The cable supports both USB-C to USB-A and USB-C to USB-C connections.
ໝາຍເຫດ: For optimal performance, ensure your device has USB 3.0 or higher USB ports.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
5.1 ການໂອນຂໍ້ມູນ
Once connected, your operating system should automatically detect the ELUTENG M.2 SSD Enclosure as an external storage device. You can then drag and drop files, ຫຼືໃຊ້ລະບົບຂອງທ່ານ file management tools to transfer data.
- NVMe SSD: Supports transfer rates up to 10Gbps.
- SATA SSD: Supports transfer rates up to 5Gbps.
The enclosure utilizes the RTL9210B main control chip, supporting UASP (USB Attached SCSI Protocol) and Trim commands to enhance read/write efficiency and reduce CPU load.
5.2 ຄວາມເຂົ້າກັນໄດ້ຂອງ SSD
The enclosure supports a wide range of M.2 SSDs:
- NVMe SSDs: M Key and B+M Key.
- SATA SSDs: B+M Key (NGFF).
- ຂະໜາດ: 2230, 2242, 2260, and 2280 form factors.
6. ບໍາລຸງຮັກສາ
6.1 ການກະຈາຍຄວາມຮ້ອນ
The ELUTENG M.2 SSD Enclosure features an aluminum alloy shell and a bottom heat sink hole design. This construction facilitates efficient heat transfer away from the SSD, preventing overheating and maintaining optimal performance during extended use.
6.2 ການທໍາຄວາມສະອາດ
To clean the enclosure, use a soft, dry cloth. Avoid using liquid cleaners or solvents, as these may damage the finish or internal components.
7. ການແກ້ໄຂບັນຫາ
- Enclosure not detected:
- ໃຫ້ແນ່ໃຈວ່າ SSD ໄດ້ຖືກຕິດຕັ້ງຢ່າງຖືກຕ້ອງແລະຮັບປະກັນພາຍໃນ enclosure.
- Try connecting the enclosure to a different USB port on your device.
- ທົດສອບດ້ວຍສາຍ USB ອື່ນຖ້າມີ.
- ກວດສອບວ່າ SSD ຕົວມັນເອງເຮັດວຽກໄດ້ໂດຍການທົດສອບໃນອຸປະກອນທີ່ເຂົ້າກັນໄດ້ອື່ນຖ້າຫາກວ່າເປັນໄປໄດ້.
- For new SSDs, ensure they are initialized and formatted in your operating system's Disk Management (Windows) or Disk Utility (Mac OS).
- ຄວາມໄວການໂອນຊ້າ:
- Ensure you are connected to a USB 3.0 (or higher) port on your device. Older USB 2.0 ports will significantly limit speeds.
- Confirm that your SSD is an NVMe drive for 10Gbps speeds; SATA drives will operate at up to 5Gbps.
- ປິດແອັບພລິເຄຊັນອື່ນທີ່ອາດຈະໃຊ້ຊັບພະຍາກອນຂອງລະບົບ ຫຼື disk I/O.
- Check the health of your SSD.
- Enclosure ຮ້ອນ:
- It is normal for the aluminum alloy shell to become warm during operation, especially during heavy data transfers, as it is designed to dissipate heat from the SSD.
- Ensure the thermal pad is correctly placed on the SSD chips.
8. ວິດີໂອຜະລິດຕະພັນຢ່າງເປັນທາງການ
Video: M.2 NVME SSD USB Adapter SSD Enclosure. This video provides a visual overview of the ELUTENG M.2 NVME SSD USB Adapter Enclosure, demonstrating its features and design.
Video: ELUTENG M.2 NVME SATA SSD Enclosure Aluminum. This video showcases the aluminum design and dual NVME/SATA compatibility of the ELUTENG M.2 SSD Enclosure.
9. ຂໍ້ມູນການຮັບປະກັນ
ELUTENG products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact ELUTENG customer support.
10. ສະຫນັບສະຫນູນ
If you encounter any issues or have questions regarding your ELUTENG M.2 NVMe/SATA SSD Enclosure, please contact our customer support team. Contact information can typically be found on our official webສະຖານທີ່ຫຼືຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນ.
