CORE Stunt Scooter Stand Instruction Manual

1. ຜະລິດຕະພັນເກີນview

The CORE Stunt Scooter Stand is a versatile accessory designed for convenient storage of stunt scooters. It functions as both a floor stand and a wall mount, accommodating various wheel sizes and helping to organize your space.

ຮູບພາບ: ທາງຫນ້າ view of the CORE Stunt Scooter Stand.

ຮູບພາບ: ຂ້າງ view of the CORE Stunt Scooter Stand.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• ຈຸດ​ປະ​ສົງ​ສອງ​: Functions as a floor stand or a wall mount.
• ຄວາມເຂົ້າກັນໄດ້ທົ່ວໂລກ: Designed to fit most stunt scooters, including wheels up to 30mm width and 125mm diameter.
• ການກໍ່ສ້າງທົນທານ: Made from high-quality injection-molded plastic.
• Pre-molded Drill Holes: ສໍາລັບການຕິດຝາໄດ້ງ່າຍ.

2. ຄໍາແນະນໍາການຕິດຕັ້ງ

2.1. Floor Stand Configuration

To use the CORE Stunt Scooter Stand as a floor stand, simply place it on a flat, stable surface. The stand is designed to cradle the scooter's wheel, providing stability.

1. Select a flat and stable area for placement.
2. Position the stand with the wider base on the floor.
3. Gently roll the scooter's front or rear wheel into the designated groove of the stand. Ensure the scooter is balanced.

Image: Scooter positioned in the floor stand.

2.2. Wall Mount Configuration

For wall mounting, the stand features pre-molded drill holes. Appropriate wall plugs and screws (not provided) are required for secure installation.

1. ເລືອກສະຖານທີ່: Select a suitable wall location, ensuring it is sturdy enough to support the scooter's weight. Consider the height for easy access to the scooter handlebars.
2. Mark ຈຸດເຈາະ: Hold the stand against the wall at the desired height and use a pencil to mark the positions of the two pre-molded drill holes.
3. ຮູເຈາະ: Drill pilot holes at the marked points. The size of the drill bit should match the recommended size for your chosen wall plugs.
4. ໃສ່ປລັກສຽບຝາ: Insert appropriate wall plugs (e.g., for plasterboard or masonry) into the drilled holes. Note: Wall plugs are not provided.
5. ຂາຕັ້ງທີ່ປອດໄພ: Align the stand with the wall plugs and secure it firmly using screws (not provided). Ensure the stand is level and tightly fastened to the wall.
6. Mount Scooter: Once secured, hang your scooter by its handlebars onto the upper hooks of the wall-mounted stand.

Image: Illustration of the stand's dual purpose as a floor stand and a wall mount.

3. ຄໍາແນະນໍາການດໍາເນີນງານ

3.1. Using as a Floor Stand

To store your scooter using the floor stand, simply roll the front or rear wheel into the stand's groove. The stand will hold the scooter upright. Ensure the scooter is centered and stable before leaving it unattended.

3.2. Using as a Wall Mount

To store your scooter using the wall mount, lift the scooter and hook its handlebars over the upper arms of the mounted stand. Ensure the handlebars are securely seated in the hooks to prevent accidental falls.

4. ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: ເຊັດບ່ອນຢືນດ້ວຍການໂຄສະນາamp ຜ້າເຊັດເພື່ອກຳຈັດຝຸ່ນ ແລະ ສິ່ງສົກກະປົກ. ຫຼີກລ່ຽງນໍ້າຢາທຳຄວາມສະອາດທີ່ມີສີແຂງ.
• ການກວດກາ: Periodically check the wall mount screws for tightness to ensure the stand remains securely fastened.
• ການເກັບຮັກສາ: Store the stand in a dry place when not in use.

5. ການແກ້ໄຂບັນຫາ

Issue: Scooter is unstable or falls over when using as a floor stand.

• ການແກ້ໄຂ 1: Ensure the stand is placed on a completely flat and level surface. Uneven surfaces can compromise stability.
• ການແກ້ໄຂ 2: Verify that the scooter's wheel is fully seated and centered within the stand's groove.
• ການແກ້ໄຂ 3: Check the scooter's wheel size. While designed for universal fit, extremely narrow or wide wheels might affect stability.

Issue: Wall mount feels loose after installation.

• ການແກ້ໄຂ 1: Re-tighten the mounting screws.
• ການແກ້ໄຂ 2: Ensure appropriate wall plugs were used for your wall type (e.g., plasterboard, masonry) and that they are correctly installed.
• ການແກ້ໄຂ 3: If the wall material is weak or damaged, consider relocating the mount to a more secure section of the wall.

6. ຂໍ້ມູນຈໍາເພາະ

Image: Dimensions of the CORE Stunt Scooter Stand.

7. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ການຮັບປະກັນ: This product comes with a 90-day warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For support or warranty inquiries, please contact CORE customer service through the retailer where the product was purchased or visit the official CORE webເວັບໄຊ.