ແນະນຳ
Thank you for choosing the RESTMO Sprinkler Timer with Brass Inlet. This programmable water timer is designed to simplify your garden watering tasks, providing automatic control for garden hoses, outdoor faucets, drip irrigation systems, and lawn watering. Please read this manual carefully before use to ensure proper installation, operation, and maintenance.
ຮູບພາບ: ທາງຫນ້າ view of the RESTMO Sprinkler Timer, showing the digital display and control dial.
ຂໍ້ມູນຄວາມປອດໄພ
- Do not immerse the timer in water. It is IP54 waterproof, meaning it is protected against dust and splashing water, but not full immersion.
- Use only 2 x AAA 1.5V alkaline batteries (not included). Do not mix old and new batteries or different types of batteries.
- ເອົາແບັດເຕີຣີອອກຖ້າບໍ່ໄດ້ໃຊ້ໂມງຈັບເວລາເປັນເວລາດົນເພື່ອປ້ອງກັນການຮົ່ວໄຫຼ.
- Protect the timer from freezing temperatures. Disconnect and store indoors during winter.
- Ensure all connections are tight to prevent leaks. Teflon tape is recommended for a secure seal.
ສິນຄ້າເກີນview
The RESTMO Sprinkler Timer features a user-friendly design with a large LCD screen and intuitive controls.
Image: Diagram illustrating the various components of the sprinkler timer, including the brass inlet, LCD screen, control dial, and buttons.
ອົງປະກອບທີ່ສໍາຄັນ:
- Pure Brass Inlet Thread: 360-degree rotatable for easy installation, with a built-in metal filter washer to prevent debris.
- ຈໍ LCD ຂະຫນາດໃຫຍ່: Displays current time, next watering time, and battery status.
- ໂມງຈັບເວລາ: Used to select different settings (SET CLOCK, START TIME, HOW LONG, HOW OFTEN, ON, OFF).
- ປຸ່ມຕົກລົງ/ຄູ່ມື: Confirms settings and activates manual watering.
- +/- ປຸ່ມ: Adjust values and activate rain delay.
- Waterproof Battery Compartment: Houses 2 x AAA batteries.
ຮູບພາບ: ໃກ້ຊິດ view of the 360-degree swivel pure brass inlet, highlighting its design and durability.
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Follow these steps to install your RESTMO Sprinkler Timer:
Image: Four-panel diagram showing the installation process: installing batteries, attaching to faucet, attaching hose, and setting the program.
- ຕິດຕັ້ງ ໝໍ້ ໄຟ: Open the waterproof battery compartment. Insert 2 x AAA 1.5V alkaline batteries (not included), ensuring correct polarity. Close the compartment securely. Keep your hands dry during this process.
- ຕິດກັບ Faucet: Screw the timer's brass inlet onto your 3/4" outdoor faucet. Hand-tighten firmly. For a leak-proof connection, wrap Teflon tape around the faucet threads before attaching the timer.
- ຕິດທໍ່: Connect your garden hose to the 3/4" hose connection at the bottom of the timer. Ensure it is tightly secured.
- ເປີດກ໊ອກນ້ຳ: Open your faucet fully. The timer is designed to operate under water pressure.
ຄໍາແນະນໍາການດໍາເນີນງານ
1. ຕັ້ງໂມງ
This step sets the current time on the timer.
- ຫັນ ໜ້າ ປັດໄປຫາ ຕັ້ງໂມງ.
- ກົດ +/- buttons to set the current hour and minute.
- ກົດ OK button to switch between hour and minute setup.
- Turn the dial to any other position to save changes.
2. ຕັ້ງເວລາເລີ່ມຕົ້ນ
This sets when your automatic watering program will begin.
- ຫັນ ໜ້າ ປັດໄປຫາ ເລີ່ມເວລາ.
- ກົດ +/- ປຸ່ມເພື່ອຕັ້ງເວລາເລີ່ມຕົ້ນທີ່ຕ້ອງການ.
- ກົດ OK button to switch between hour and minute setup.
- Turn the dial to any other position to save changes.
3. Set Watering Duration (How Long)
This sets how long the watering will last for each cycle.
- ຫັນ ໜ້າ ປັດໄປຫາ ດົນປານໃດ.
- ກົດ +/- buttons to set the watering duration from 1 minute to 239 minutes.
- ກົດ OK button to switch between hour and minute setup.
- Turn the dial to any other position to save changes.
4. Set Watering Frequency (How Often)
This sets how often the watering cycles will repeat.
- ຫັນ ໜ້າ ປັດໄປຫາ ເລື້ອຍໆເທົ່າໃດ.
- ກົດ +/- buttons to set the watering frequency: from 1 hour to 12 hours, or from 1 day to 7 days.
- ກົດ OK button to switch between hour and day/hour setup.
- Turn the dial to any other position to save changes.
Image: Visual guide showing the range for 'How Long' (1-239 mins) and 'How Often' (1hr-7 days) settings.
5. ການຫົດນໍ້າອັດຕະໂນມັດ
Once programmed, turn the dial to ON to activate the automatic watering schedule. The LCD screen will display the remaining time of the current watering program when watering is active. When watering is off, the screen will flash between the next watering start time and the current time.
Image: Depicts the timer set to 'ON' for automatic watering, with a visual representation of the watering duration and frequency settings.
6. ການຫົດນໍ້າດ້ວຍມື
ການຫົດນໍ້າດ້ວຍຕົນເອງໂດຍບໍ່ມີຜົນກະທົບຕໍ່ຕາຕະລາງການວາງແຜນຂອງທ່ານ:
- With the dial at ON, long press the ຕົກລົງ/ຄູ່ມື ປຸ່ມສໍາລັບ 3 ວິນາທີ.
- ກົດ +/- buttons to select the desired manual watering duration (1 to 239 minutes).
- ກົດ OK to switch between hour and minute. The setup flashes 3 times and manual watering will automatically start.
- To cancel manual watering, turn the dial to ປິດ ແລະຫຼັງຈາກນັ້ນກັບຄືນໄປບ່ອນ ON.
Image: Shows how to activate manual watering and adjust its duration, with a visual of water flowing from the hose.
7. ຝົນລ່າຊ້າ
To temporarily pause your watering schedule due to rain or other reasons:
- With the dial at ON, long press the ຊັກຊ້າ + ປຸ່ມສໍາລັບ 3 ວິນາທີ.
- ກົດ +/- buttons to select a delay of 12, 24, 48, or 72 hours.
- ກົດ OK or wait for 3 seconds to start the rain delay.
- To cancel rain delay, turn the dial to ປິດ ແລະຫຼັງຈາກນັ້ນກັບຄືນໄປບ່ອນ ON.
Image: Illustrates the rain delay function with options for 12, 24, 48, and 72-hour delays.
8. Stop Watering
ເພື່ອຢຸດໂຄງການຫົດນໍ້າທັງໝົດຢ່າງສິ້ນເຊີງ:
- ຫັນ ໜ້າ ປັດໄປຫາ ປິດ. The timer will keep off until the dial is turned to ON ອີກເທື່ອຫນຶ່ງ.
Image: Shows the timer dial set to 'OFF', indicating that watering has stopped.
ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: Periodically check the brass inlet filter washer for debris and clean it to ensure optimal water flow.
- ການປ່ຽນແບັດເຕີຣີ: When the battery indicator on the LCD screen shows low power, replace the batteries promptly to avoid interruption of watering schedules.
- ລະດູໜາວ: Before the first frost, disconnect the timer from the faucet and hose. Remove the batteries and store the timer indoors in a dry, protected area to prevent damage from freezing.
ການແກ້ໄຂບັນຫາ
ນີ້ແມ່ນບາງບັນຫາທົ່ວໄປ ແລະວິທີແກ້ໄຂຂອງເຂົາເຈົ້າ:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ໂມງຈັບເວລາບໍ່ເປີດ/ຈໍ LCD ບໍ່ມີຂໍ້ມູນ | ແບັດເຕີຣີຕາຍ ຫຼື ຕິດຕັ້ງບໍ່ຖືກຕ້ອງ. | Replace batteries with new 2 x AAA alkaline batteries, ensuring correct polarity. |
| Water not flowing/Timer not watering | Faucet is off; low water pressure; clogged filter; incorrect program settings; valve stuck. | Ensure faucet is fully open. Check water pressure (10-120 psi required). Clean the inlet filter. Verify program settings (start time, duration, frequency). Reset the valves (see video below). |
| ນ້ໍາຮົ່ວຈາກການເຊື່ອມຕໍ່ | Loose connections; missing/damaged washer; insufficient Teflon tape. | Tighten all connections. Check for and replace any missing or damaged rubber washers. Apply more Teflon tape to faucet threads. |
| ໂມງຈັບເວລາບໍ່ປະຕິບັດຕາມຕາຕະລາງ | Incorrect clock setting; program not activated (dial not on ON); rain delay active. | Re-set the current time. Ensure the dial is set to ON. Check if rain delay is active and cancel if necessary. |
How to Reset the Valves:
If the timer's internal valves are not functioning correctly, you may need to reset them. This process involves cycling water through the timer manually to clear any obstructions or reset the mechanism.
Video: A step-by-step guide on how to reset the internal valves of the RESTMO Sprinkler Timer to ensure proper water flow.
ຂໍ້ມູນຈໍາເພາະ
- ຕົວແບບ: O-HT
- ວັດສະດຸ: ທອງເຫລືອງ, ໂລຫະ
- Inlet Thread: 3/4" NH (Pure Brass)
- Hose Fitting: 3/4"
- ໄລຍະເວລາການຫົດນໍ້າ: 1-239 ນາທີ
- ຄວາມຖີ່ຂອງການຫົດນໍ້າ: 1-12 hours or 1-7 days
- ຕົວເລືອກການລ່າຊ້າຝົນ: 12/24/48/72 ຊົ່ວໂມງ
- ສູງສຸດທີ່ເຄຍ. ອັດຕາການໄຫຼ: 10 GPM (35 ລິດ/ນາທີ)
- ຄວາມກົດດັນການເຮັດວຽກ: 10-120 PSI (0.5-8.0 Bar)
- ຊ່ວງອຸນຫະພູມ: 38 ຫາ 120°F (3 ຫາ 50°C)
- ການປະເມີນກັນນ້ໍາ: IP54
- ແຫຼ່ງພະລັງງານ: ແບດເຕີຣີ້ Alkaline 2 x AAA (ບໍ່ລວມ)
- ຂະໜາດຜະລິດຕະພັນ: 3.94"D x 3.94"W x 1.57"H
- ນ້ໍາຫນັກລາຍການ: 5 ອອນ
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
RESTMO products are designed for durability and performance. For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Restmo website. Our customer service team is available to assist you with any questions or concerns.