Inkbird ITC-C216T Thermostat Instruction Manual

ແນະນຳ

Thank you for choosing the Inkbird ITC-C216T Thermostat. This device is a versatile plug-and-play temperature controller designed for precise temperature management in a wide range of applications. It features three control modes: temperature, cycle time, and countdown, along with safety features like high/low temperature alarms and a child lock. This manual will guide you through the setup, operation, and maintenance of your thermostat to ensure optimal performance and safe use.

ຂໍ້ມູນຄວາມປອດໄພ

Ensure the thermostat is connected to a grounded power outlet.
Do not exceed the maximum load capacity of 10A, 220V AC (2200W).
Keep the device away from water, except for the IP67 rated probe.
ຢ່າພະຍາຍາມຖອດປະກອບ ຫຼືສ້ອມແປງເຄື່ອງດ້ວຍຕົນເອງ. ຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າຖ້າມີບັນຫາເກີດຂຶ້ນ.
ຖອດປລັກອຸປະກອນກ່ອນທຳຄວາມສະອາດ ຫຼື ດຳເນີນການບຳລຸງຮັກສາ.

ສິນຄ້າເກີນview

ອົງປະກອບ

Detailed diagram of the Inkbird ITC-C216T thermostat, labeling its components: LCD, operational buttons, output, temperature probe, input, heating icon, cooling icon, timing icon, child lock, start temperature/time, and stop temperature/time.

ຮູບພາບ: Detailed diagram of the Inkbird ITC-C216T thermostat with labeled components.

LCD with White Backlight: Displays current and set temperatures/times.
Operational Buttons: MODE, UP, SET, DOWN for navigation and setting adjustments.
ຜົນຜະລິດ: Max 10A (2200W at 220Vac) for connecting heating or cooling devices.
ການກວດອຸນຫະພູມ: 2m/79in long, IP67 waterproof for accurate temperature detection.
ປ້ອນຂໍ້ມູນ: 100~240Vac 50/60Hz max 10A.
ໄອຄອນການໃຫ້ຄວາມຮ້ອນ: Indicates heating operation.
Cooling Icon: Indicates cooling operation.
Timing Icon: Indicates timing function is active.
ໄອຄອນລັອກເດັກນ້ອຍ: Indicates child lock is engaged.
ເລີ່ມ: Displays start temperature or time.
ຢຸດ: Displays stop temperature or time.

ຄຸນນະສົມບັດທີ່ສໍາຄັນ

Hand holding the Inkbird ITC-C216T thermostat, highlighting its backlit display, child lock, temperature calibration, memory function, and high/low temperature alarm features.

ຮູບພາບ: The Inkbird ITC-C216T thermostat showcasing ລັກສະນະຫຼັກຂອງມັນ.

ຈໍສະແດງຜົນ Backlit LCD: Easy to read current and set values, even in low light.
Three Control Modes: Temperature, Cycle Time, and Countdown.
ຊ່ວງອຸນຫະພູມກວ້າງ: Controls temperatures from -40°C to 100°C.
ສັນຍານເຕືອນອຸນຫະພູມສູງ / ຕ່ໍາ: ຄ່າປຸກທີ່ສາມາດປັບແຕ່ງໄດ້ດ້ວຍທາງເລືອກທີ່ຈະປິດສຽງ buzzer ໄດ້.
ການປັບອຸນຫະພູມ: Allows for fine-tuning temperature readings.
Cooling Delay: Protects cooling equipment from short cycling.
ລັອກເດັກ: ປ້ອງກັນການປ່ຽນແປງການຕັ້ງຄ່າໂດຍບັງເອີນ.
ຟັງຊັນຫນ່ວຍຄວາມຈໍາ: Retains all settings after a power interruption.
IP67 Waterproof Probe: Suitable for use in soil or submerged in water.

ຕັ້ງຄ່າ

ແກະກ່ອງ: Carefully remove the thermostat and its components from the packaging.
ປລັກອິນ: Insert the thermostat into a standard 220V AC grounded power outlet. The LCD display will light up.
ເຊື່ອມຕໍ່ອຸປະກອນ: Plug your heating or cooling device (e.g., heater, fan, refrigerator) into the output socket of the thermostat.
Position Probe: Place the waterproof temperature probe in the environment where temperature control is needed (e.g., terrarium, water, soil). Ensure the probe is securely positioned and not directly exposed to heating elements or strong air currents that could affect readings.

ຮູບແບບການເຮັດວຽກ

The ITC-C216T thermostat supports three main control modes: Temperature Mode, Cycle Time Mode, and Countdown Mode. Please note that Temperature Mode and Timing functions cannot be used simultaneously.

1. ໂໝດອຸນຫະພູມ

Diagram illustrating the Inkbird ITC-C216T thermostat's cooling and heating capabilities, with temperature ranges from -40°C to 100°C.

ຮູບພາບ: Visual representation of the thermostat's cooling and heating functions.

In Temperature Mode, the thermostat automatically controls your connected device (heater or cooler) to maintain a desired temperature range. The device will operate in heating or cooling mode based on your set START and STOP temperatures.

ກົດ ໂໝດ button repeatedly until the display shows the temperature mode (usually indicated by a thermometer icon).
ກົດ SET to enter setting mode. The START temperature will flash. Use the UP ແລະ ລົງ buttons to adjust the desired START temperature.
ກົດ SET again to confirm and move to the STOP temperature. Adjust the STOP temperature using UP ແລະ ລົງ.
ກົດ SET one more time to save the settings and exit.
If START temperature is lower than STOP temperature, the thermostat operates in ຮູບແບບການໃຫ້ຄວາມຮ້ອນ.
If START temperature is higher than STOP temperature, the thermostat operates in ໂໝດເຮັດຄວາມເຢັນ.

2. Cycle Time Mode (P01)

Illustration of the Inkbird ITC-C216T thermostat's Cycle Time Mode (P01) setting, showing a device turning on and off at set intervals.

ຮູບພາບ: Diagram explaining the Cycle Time Mode (P01) operation.

This mode allows you to set a repeating ON/OFF cycle for your connected device. The time range is 0 to 99 hours and 59 minutes.

ກົດ ໂໝດ until P01 is displayed.
ກົດ SET. The ON time will flash. Adjust using UP/ລົງ.
ກົດ SET. The OFF time will flash. Adjust using UP/ລົງ.
ກົດ SET to save and exit. The device will now cycle ON and OFF according to your settings.

3. Countdown Mode (P02, P03, P04)

The Countdown Mode offers three sub-modes for specific timed operations:

P02: Countdown ON
ຮູບພາບ: Diagram explaining the Countdown ON Mode (P02).
The device will turn ON after the set countdown period.
P03: Countdown OFF
ຮູບພາບ: Diagram explaining the Countdown OFF Mode (P03).
The device will turn OFF after the set countdown period.
P04: Countdown ON & OFF
ຮູບພາບ: Diagram explaining the Countdown ON&OFF Mode (P04).
The device will turn ON after the first countdown, then turn OFF after a second countdown.

To set any Countdown Mode:

ກົດ ໂໝດ until P02, P03, or P04 is displayed.
ກົດ SET. The countdown time(s) will flash. Adjust using UP/ລົງ.
ກົດ SET ເພື່ອບັນທຶກແລະອອກ.

ການຕັ້ງຄ່າຂັ້ນສູງ

ການປັບອຸນຫະພູມ (CA)

Image showing the Inkbird ITC-C216T thermostat displaying 'CA' for temperature calibration, with a gecko in the background.

ຮູບພາບ: Thermostat screen showing temperature calibration setting.

If you find that the temperature reading is inaccurate compared to a known reference thermometer, you can calibrate the device:

ເມື່ອອຸປະກອນເປີດ, ໃຫ້ກົດຄ້າງໄວ້ SET button for approximately 3 seconds to enter the parameter settings.
ໃຊ້ UP/ລົງ buttons to navigate to the 'CA' (Calibration) setting.
ກົດ SET, ຫຼັງຈາກນັ້ນນໍາໃຊ້ UP/ລົງ to adjust the calibration value (e.g., +0.5°C or -0.5°C).
ກົດ SET ເພື່ອຢືນຢັນແລະອອກ.

Cooling Delay (Pt)

Image showing the Inkbird ITC-C216T thermostat displaying 'Pt' for refrigeration delay, with a refrigerator in the background.

ຮູບພາບ: Thermostat screen showing refrigeration delay setting.

The cooling delay function prevents rapid cycling of cooling equipment, which can extend its lifespan.

Enter parameter settings (press and hold SET ເປັນເວລາ 3 ວິນາທີ).
Navigate to 'Pt' (Cooling Delay).
Adjust the delay time in minutes using UP/ລົງ.
ກົດ SET ເພື່ອຢືນຢັນແລະອອກ.

High/Low Temperature Alarms (AH/AL)

Image showing the Inkbird ITC-C216T thermostat displaying 'AH' for high temperature alarm, with a mute icon, next to a lizard.

ຮູບພາບ: Thermostat screen showing high temperature alarm with mute option.

Set custom high (AH) and low (AL) temperature alarm values. If the detected temperature exceeds these limits, an audible alarm will sound.

Enter parameter settings.
Navigate to 'AH' (High Alarm) or 'AL' (Low Alarm).
Adjust the alarm temperature using UP/ລົງ.
ກົດ SET ເພື່ອຢືນຢັນ.
To mute the buzzer, press any button when the alarm sounds.

ລັອກເດັກ

Image showing the Inkbird ITC-C216T thermostat with a child lock icon displayed, indicating the safety feature is active.

ຮູບພາບ: Thermostat displaying the child lock icon.

To prevent accidental changes to settings, activate the child lock:

ກົດຄ້າງໄວ້ UP ແລະ ລົງ buttons simultaneously for approximately 3 seconds. The child lock icon will appear on the display.
Repeat the action to unlock the device.

ຟັງຊັນຄວາມຈຳ & ຣີເຊັດເປັນຄ່າໂຮງງານ

ຟັງຊັນຫນ່ວຍຄວາມຈໍາ: The thermostat automatically saves all your settings. In case of a power outage, the device will resume operation with the last saved settings once power is restored.
ປັບຄ່າໂຮງງານ: To restore the device to its default factory settings, consult the full user manual or contact Inkbird support for specific instructions.

ຄໍາຮ້ອງສະຫມັກ

Collage of images showing various applications for the Inkbird ITC-C216T thermostat, including reptile terrariums, fish tanks, home appliances, refrigeration, home brewing, and incubation.

ຮູບພາບ: Diverse applications of the Inkbird ITC-C216T thermostat.

The Inkbird ITC-C216T thermostat is suitable for a wide range of temperature control needs, including but not limited to:

Reptile Terrariums and Aquariums
Greenhouses and Plant Propagation
Incubators for Eggs
Home Brewing and Fermentation
Controlling Freezers and Refrigerators
Managing Heating Mats and other Home Appliances

ຂໍ້ມູນຈໍາເພາະ

ຄຸນສົມບັດ	ຂໍ້ມູນຈໍາເພາະ
ຕົວແບບ	ITC-C216T
ສະບັບtage	220V AC
ໂຫຼດຜົນຜະລິດສູງສຸດ	10A/2200W
ໄລຍະການຄວບຄຸມອຸນຫະພູມ	-40°C ຫາ 100°C (-40°F ຫາ 212°F)
ຊ່ວງເວລາ	0 to 99 hours 59 minutes
ປະເພດ Probe	ກັນນໍ້າ IP67
ຄວາມຍາວຂອງການກວດສອບ	2 ແມັດ (79 ນິ້ວ)
ວັດສະດຸ	Acrylonitrile Butadiene Styrene (ABS)
ຂະໜາດ	8.8 x 8.9 x 13.7 cm
ນ້ຳໜັກ	250 g
ປະເພດການຄວບຄຸມ	ປຸ່ມ

ການແກ້ໄຂບັນຫາ

If you encounter issues with your Inkbird ITC-C216T thermostat, please refer to the following common solutions:

ການສະແດງທີ່ບໍ່ມີແສງສະຫວ່າງ: Ensure the thermostat is securely plugged into a live power outlet. Check the power supply.
ການອ່ານອຸນຫະພູມທີ່ບໍ່ຖືກຕ້ອງ: Verify the probe is correctly placed and not damaged. Perform a temperature calibration (refer to Advanced Settings).
ອຸປະກອນບໍ່ເປີດ/ປິດ: Check if the connected heating/cooling device is functioning correctly. Ensure the thermostat is in the correct operating mode (Temperature, Cycle Time, or Countdown) and that settings are properly configured. Verify the child lock is not active.
ສຽງປຸກດັງຢ່າງຕໍ່ເນື່ອງ: Check the high/low alarm settings (AH/AL) and the current temperature. Adjust alarm values if necessary or mute the buzzer by pressing any button.
ການຕັ້ງຄ່າບໍ່ໄດ້ບັນທຶກ: The device has a memory function. If settings are not retained, try a factory reset (consult full manual) or contact support.

For more detailed troubleshooting or persistent issues, please contact Inkbird customer support.

ບໍາລຸງຮັກສາ

ທໍາຄວາມສະອາດ: Disconnect the thermostat from power before cleaning. Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the main unit in water.
Probe Care: Regularly inspect the temperature probe for any signs of damage. Clean the probe gently if it accumulates debris, especially if used in water or soil.
ການເກັບຮັກສາ: ຖ້າເກັບຮັກສາອຸປະກອນໄວ້ເປັນເວລາດົນ, ໃຫ້ແນ່ໃຈວ່າມັນສະອາດ ແລະ ແຫ້ງ. ເກັບຮັກສາໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ ແລະ ຫຼີກລ່ຽງແສງແດດໂດຍກົງ.

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Inkbird products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms, registration, or technical support, please visit the official Inkbird webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ.

ທ່ານສາມາດຊອກຫາຂໍ້ມູນເພີ່ມເຕີມແລະຊັບພະຍາກອນສະຫນັບສະຫນູນໂດຍການຢ້ຽມຢາມ ຮ້ານ Inkbird ໃນ Amazon.

	Inkbird ITC-308 Plug and Play ຄູ່ມືຜູ້ໃຊ້ຄວບຄຸມອຸນຫະພູມ ເອກະສານນີ້ໃຫ້ຄໍາແນະນໍາທີ່ສົມບູນແບບກັບ Inkbird ITC-308 Plug and Play Temperature Controller, ລາຍລະອຽດກ່ຽວກັບຄຸນສົມບັດ, ຂໍ້ມູນສະເພາະ, ການດໍາເນີນງານ, ແລະການລະມັດລະວັງດ້ານຄວາມປອດໄພສໍາລັບຄໍາຮ້ອງສະຫມັກຕ່າງໆ.
	Inkbird ITC-308 Plug and Play ຄູ່ມືຜູ້ໃຊ້ຄວບຄຸມອຸນຫະພູມ Comprehensive user manual for the Inkbird ITC-308 Plug and Play Temperature Controller, covering specifications, operation, menu settings, error codes, and warranty information. Ideal for home brewing, aquariums, incubators, and HVAC applications.
	Inkbird ITC-308 Plug and Play ຄູ່ມືຜູ້ໃຊ້ຄວບຄຸມອຸນຫະພູມ ຄູ່ມືການນໍາໃຊ້ທີ່ສົມບູນແບບສໍາລັບການ Inkbird ITC-308, ຕົວຄວບຄຸມອຸນຫະພູມຜົນຜະລິດ relay ສອງ plug-and-play. ລາຍລະອຽດສະເພາະ, ການດໍາເນີນງານທີ່ສໍາຄັນ, ການຕັ້ງຄ່າເມນູ, ລາຍລະອຽດຄວາມຜິດພາດ, ແລະຂໍ້ມູນການຮັບປະກັນສໍາລັບຄໍາຮ້ອງສະຫມັກຕ່າງໆເຊັ່ນ: brew ເຮືອນ, ຕູ້ປາ, ແລະ incubation.
	INKBIRD ITC-306A Smart Wi-Fi Temperature Controller ສໍາລັບຕູ້ປາ - ຄູ່ມືຜູ້ໃຊ້ ຄູ່ມືການນໍາໃຊ້ທີ່ສົມບູນແບບສໍາລັບ INKBIRD ITC-306A Smart Wi-Fi Temperature Controller, ລາຍລະອຽດລັກສະນະ, ການຕັ້ງຄ່າ, ການດໍາເນີນງານ, ການແກ້ໄຂບັນຫາ, ແລະສະເພາະດ້ານວິຊາການສໍາລັບການນໍາໃຊ້ຕູ້ປາ. ຮຽນຮູ້ວິທີເຊື່ອມຕໍ່ຜ່ານ Wi-Fi, ຕັ້ງຄ່າການຄວບຄຸມອຸນຫະພູມ, ແລະຈັດການໂມງປຸກ.
	Inkbird ITC-308 Plug and Play ຄູ່ມືຜູ້ໃຊ້ຄວບຄຸມອຸນຫະພູມ ຄູ່ມືຜູ້ໃຊ້ທີ່ສົມບູນແບບສໍາລັບ Inkbird ITC-308 Plug and Play Temperature Controller. ກວມເອົາຜະລິດຕະພັນview, ລາຍລະອຽດສະເພາະ, ຫນ້າທີ່ທີ່ສໍາຄັນ, ຄໍາແນະນໍາການດໍາເນີນງານ, ການຕັ້ງຄ່າເມນູ, ລະຫັດຄວາມຜິດພາດ, ແລະຂໍ້ມູນການຮັບປະກັນ.
	ຄູ່ມືຜູ້ໃຊ້ INKBIRD ITC-308-WIFI ຄວບຄຸມອຸນຫະພູມ ຄູ່ມືການນໍາໃຊ້ທີ່ສົມບູນແບບສໍາລັບ INKBIRD ITC-308-WIFI Wi-Fi ເຄື່ອງຄວບຄຸມອຸນຫະພູມ Wi-Fi ທີ່ກວມເອົາການຕັ້ງຄ່າ, ການດໍາເນີນງານ, ສະເພາະ, ການປະຕິບັດ FCC ແລະການແກ້ໄຂບັນຫາ.