Varmilo VPE87 Chang'e TKL Mechanical Keyboard User Manual

ແນະນຳ

The Varmilo VPE87 TKL mechanical keyboard is designed for versatility and a premium typing experience. It features triple-mode connectivity (wired, Bluetooth, and 2.4 GHz wireless), hotswap sockets for switch customization, and a white LED backlight. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal use of your keyboard.

ເນື້ອໃນຊຸດ

• Varmilo VPE87 Mechanical Keyboard
• ສາຍ USB-C
• 2.4 GHz Wireless Receiver (typically stored in keyboard)
• Keycap Puller (ອາດຈະລວມ)
• Switch Puller (ອາດ​ຈະ​ລວມ​)

ຕັ້ງຄ່າ

Before using your Varmilo VPE87 keyboard, please follow these steps to set it up.

1. Physical Connection and Initial Charge

Image: USB-C port and 3-way cord channel. The USB-C port is located on the back of the keyboard, designed to allow the cable to exit from the left, right, or center for tidy cable management.

1. ເຊື່ອມຕໍ່ສາຍ USB-C ທີ່ໃຫ້ມາກັບພອດ USB-C ຂອງແປ້ນພິມ.
2. Connect the other end of the USB-C cable to an available USB port on your computer or a USB power adapter.
3. For wireless use, ensure the keyboard is sufficiently charged. The white LED backlight will indicate charging status (specific indicator behavior may vary, refer to LED section).

2. ການປັບມຸມແປ້ນພິມ

ຮູບພາບ: Side profile with kickstand extended. The keyboard features a 2-step kickstand on the underside, allowing users to adjust the typing angle for ergonomic comfort.

The VPE87 features a 2-step kickstand on its underside. Gently flip out the kickstands to adjust the keyboard's angle to your preferred typing position.

ຄໍາແນະນໍາການດໍາເນີນງານ

ໂໝດການເຊື່ອມຕໍ່

The Varmilo VPE87 supports three connectivity modes: Wired, Bluetooth, and 2.4 GHz Wireless. You can switch between modes using the dedicated switch or key combinations, typically located on the back or side of the keyboard.

ແບບມີສາຍ

• Connect the USB-C cable from the keyboard to your computer.
• ແປ້ນພິມຈະຖືກຮັບຮູ້ໂດຍອັດຕະໂນມັດໂດຍລະບົບປະຕິບັດການຂອງທ່ານ.
• This mode also charges the keyboard's internal battery.

ແບບ Bluetooth

• Ensure the keyboard is in Bluetooth mode (check the switch on the back/side).
• ໃນອຸປະກອນຂອງທ່ານ (ຄອມພິວເຕີ, ແທັບເລັດ, ໂທລະສັບສະຫຼາດ), ເປີດ Bluetooth ແລະຊອກຫາອຸປະກອນໃຫມ່.
• Select "Varmilo VPE87" (or similar name) from the list of available devices.
• Follow any on-screen prompts to complete pairing. The keyboard may support multiple Bluetooth profiles (e.g., Fn + 1, 2, 3 for different devices). Refer to specific key combinations for your model.

ໂໝດໄຮ້ສາຍ 2.4 GHz

• Locate the 2.4 GHz USB receiver (often stored in a compartment on the keyboard's underside).
• ສຽບຕົວຮັບ USB ເຂົ້າໄປໃນຜອດ USB ທີ່ມີຢູ່ໃນຄອມພິວເຕີຂອງທ່ານ.
• Ensure the keyboard is in 2.4 GHz wireless mode (check the switch on the back/side).
• ແປ້ນພິມຄວນເຊື່ອມຕໍ່ກັບຕົວຮັບໂດຍອັດຕະໂນມັດ.

ການຄວບຄຸມໄຟຫຼັງ

Image: Keyboard with white LED backlight. The white LED backlight enhances visibility of the keycaps, especially in low-light conditions.

The VPE87 features a white LED backlight. Use the following key combinations to control the backlight:

• Fn + Arrow Up: ເພີ່ມຄວາມສະຫວ່າງຂອງ backlight.
• Fn + Arrow Down: Decrease backlight brightness / Turn off backlight.
• Fn + ກະແຈອື່ນໆ: (Specific to model) May control backlight effects or modes. Refer to the keyboard's keycap legends for additional functions.

Hotswap Sockets (Switch Customization)

ຮູບພາບ: ເທິງ view of the Varmilo VPE87 keyboard. This image displays the keyboard's layout and the artistic design on its keycaps and case, highlighting its aesthetic appeal.

The VPE87 is equipped with hotswap sockets, allowing you to change mechanical switches without soldering. This enables customization of your typing feel.

1. ເອົາ Keycap ອອກ: ໃຊ້ຕົວດຶງຝາປິດແປ້ນພິມເພື່ອຄ່ອຍໆຖອດຝາປິດແປ້ນພິມທີ່ຕ້ອງການອອກ.
2. ລຶບສະວິດອອກ: Use a switch puller to carefully grip the top and bottom clips of the switch and pull it straight up.
3. ໃສ່ສະວິດໃໝ່: Align the pins of the new switch with the holes in the hotswap socket. Gently push the switch straight down until it clicks into place. Ensure pins are not bent.
4. ແທນທີ່ Keycap: ວາງປຸ່ມກົດກັບຄືນໃສ່ປຸ່ມສະວິດໃໝ່.

Note: Ensure the keyboard is disconnected or powered off before swapping switches. Use compatible 3-pin or 5-pin mechanical switches.

ຄຸນສົມບັດອື່ນໆ

• Double-layer Silicone Sound Absorption: This design minimizes typing noise for a quieter experience.
• 3-Way Cord Channel: The USB-C cable can be routed from the left, right, or center of the keyboard's underside for neat cable management.

ບໍາລຸງຮັກສາ

Proper maintenance ensures the longevity and performance of your Varmilo VPE87 keyboard.

• ທໍາ​ຄວາມ​ສະ​ອາດ Keycaps​:
  • Use a keycap puller to remove keycaps.
  • ເຊັດ keycaps ກັບການໂຄສະນາamp ຜ້າແລະການແກ້ໄຂສະບູ່ອ່ອນໆ. ຫຼີກເວັ້ນການສານເຄມີທີ່ຮຸນແຮງ.
  • Ensure keycaps are completely dry before reattaching.
• ທໍາ​ຄວາມ​ສະ​ອາດ​ຮ່າງ​ກາຍ Keyboard​:
  • ໃຊ້ຜ້າອ່ອນແລະແຫ້ງເຊັດໜ້າຜິວແປ້ນພິມ.
  • ສໍາລັບຂີ້ຝຸ່ນແລະສິ່ງເສດເຫຼືອລະຫວ່າງກະແຈ, ໃຊ້ອາກາດບີບອັດ.
• ການເກັບຮັກສາ: ເກັບຮັກສາແປ້ນພິມໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງແລະອຸນຫະພູມທີ່ຮຸນແຮງ.
• Liquid Spills: In case of a liquid spill, immediately disconnect the keyboard, turn it upside down to drain, and allow it to dry completely for at least 24-48 hours before attempting to use it again. Do not use a hairdryer or heat gun.

ການແກ້ໄຂບັນຫາ

If you encounter issues with your Varmilo VPE87 keyboard, try the following solutions:

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Varmilo products are designed for quality and durability. For specific warranty information, please refer to the warranty card included with your product or visit the official Varmilo webເວັບໄຊ.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Varmilo customer service through their official channels. You can often find support contact information on the brand's official webເວັບໄຊທ໌ຫຼືຜ່ານຮ້ານຂາຍຍ່ອຍບ່ອນທີ່ທ່ານຊື້ຜະລິດຕະພັນ.

Visit the official Varmilo Store for more information: Varmilo Store on Amazon