ເຄື່ອງສຽງລົດ Lanzar VIBE452N.6 6000 ວັດ 4 ຊ່ອງ Amplifier ຄູ່​ມື​ການ​ແນະ​ນໍາ​

ແນະນຳ

Thank you for choosing the Lanzar VIBE452N.6 4-Channel Car Audio Ampຕົວຊີ້ບອກ. ຄູ່​ມື​ນີ້​ໃຫ້​ຄໍາ​ແນະ​ນໍາ​ລະ​ອຽດ​ສໍາ​ລັບ​ການ​ຕິດ​ຕັ້ງ​ທີ່​ເຫມາະ​ສົມ​, ການ​ດໍາ​ເນີນ​ງານ​, ແລະ​ການ​ບໍາ​ລຸງ​ຮັກ​ສາ​ຂອງ​ທ່ານ​ ampເຄື່ອງຂະຫຍາຍສຽງ. ກະລຸນາອ່ານຄູ່ມືນີ້ຢ່າງລະອຽດກ່ອນທີ່ຈະພະຍາຍາມຕິດຕັ້ງ ຫຼື ໃຊ້ງານເພື່ອຮັບປະກັນປະສິດທິພາບ ແລະ ຄວາມປອດໄພທີ່ດີທີ່ສຸດ.

ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

• ກ່ອນທີ່ຈະເລີ່ມການຕິດຕັ້ງໃດໆ, ໃຫ້ຖອດສາຍໄຟຂົ້ວລົບຂອງແບັດເຕີຣີຂອງລົດອອກສະເໝີ.
• ຮັບປະກັນວ່າສາຍໄຟທັງໝົດໄດ້ຖືກວາງ ແລະ ຮັດແໜ້ນຢ່າງຖືກຕ້ອງເພື່ອປ້ອງກັນຄວາມເສຍຫາຍ ຫຼື ວົງຈອນສັ້ນ.
• Use appropriate gauge wiring for power and ground connections to handle the amplifier's current draw.
• ພູ ampຕິດຕັ້ງເຄື່ອງປັບອາກາດຢ່າງປອດໄພໃນສະຖານທີ່ທີ່ມີລະບາຍອາກາດພຽງພໍ ແລະ ປ້ອງກັນຈາກຄວາມຊຸ່ມຊື່ນ ແລະ ຄວາມຮ້ອນທີ່ເກີນ.
• If you are unsure about any part of the installation process, seek assistance from a professional car audio installer.
• ຢ່າປະຕິບັດການ ampເຄື່ອງປັບອາກາດ ຖ້າມັນເສຍຫາຍ ຫຼື ເຮັດວຽກຜິດປົກກະຕິ.

ແມ່ນຫຍັງຢູ່ໃນກ່ອງ

Please check the contents of your package. If any items are missing or damaged, contact your dealer immediately.

This image displays the typical contents included with the Lanzar VIBE452N.6 amplifier: ໄດ້ amplifier unit, a remote subwoofer level control, connection cables, and mounting screws.

• Lanzar VIBE452N.6 4-Channel Ampມີຊີວິດຊີວາ
• Remote Subwoofer Bass Control
• ຄູ່ມືເລີ່ມຕົ້ນດ່ວນ
• screws ການຕິດຕັ້ງ
• Connection Cables (as pictured)

ຄຸນສົມບັດຜະລິດຕະພັນ

The Lanzar VIBE452N.6 amplifier is engineered with advanced features for high-quality car audio performance:

• ຜົນຜະລິດພະລັງງານສູງ: Delivers 4 x 1250 Watts RMS @ 4 Ohms, 4 x 1500 Watts Max @ 4 Ohms, 2 x 3000 Watts Max @ 4 Ohms Bridged, and 4 x 2000 Watts @ 2 Ohms RMS.
• ແຫຼ່ງພະລັງງານ MOSFET: Features a regulated PWM-type power supply that automatically maintains rated power across varying battery voltages.
• Variable Input Level Controls: Independent controls for each pair of channels allow precise gain matching.
• Variable Crossover Controls: High-Pass and Low-Pass crossover controls for precise audio frequency management.
• High-Efficiency Heatsink: Heavy aluminum heatsink design ensures efficient heat dissipation for stable operation.
  

  This image highlights the robust aluminum heatsink, designed for efficient thermal management of the ampມີຊີວິດຊີວາ.

• Remote Subwoofer Bass Control: Allows convenient adjustment of subwoofer bass levels from the driver's seat.
  

  This image shows the remote bass control knob, which allows users to adjust the bass boost from 0 to 18 dB at 60 Hz.

• Electronic Crossover Network: Integrated crossover for precise frequency distribution.
• Bass Boost Circuit: ປັບປຸງຜົນຜະລິດຄວາມຖີ່ຕໍ່າ.
• Bridgeable at 4 Ohms: Offers flexibility for various speaker configurations.
• 2 Ohm Stereo Stable: Ensures compatibility with a wide range of speakers.
• Tri-Mode Capable: Supports simultaneous stereo and mono operation.
• Silver RCA Inputs and Line Outs: High-quality connectors for signal integrity and multi-ampການ​ຕັ້ງ​ຄ່າ lifier​.
• Power Protection LED Indicators: Visual indicators for operational status and protection modes.
• Advanced Protection Circuitry: ປົກປ້ອງ amplifier from overload, short circuits, and thermal issues.
• Soft Turn On/Off: Prevents pops and thumps during power cycling.

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

ການຕິດຕັ້ງທີ່ເຫມາະສົມແມ່ນສໍາຄັນສໍາລັບການປະຕິບັດແລະອາຍຸຍືນຂອງເຈົ້າ ampຕົວຊີ້ບອກ. ປະຕິບັດຕາມຂັ້ນຕອນເຫຼົ່ານີ້ຢ່າງລະມັດລະວັງ.

1. ການຕິດຕັ້ງ Ampມີຊີວິດຊີວາ

ເລືອກສະຖານທີ່ຕິດຕັ້ງທີ່ແຫ້ງ, ມີລະບາຍອາກາດດີ, ແລະ ປອດໄພ. ຮັບປະກັນວ່າມີພື້ນທີ່ພຽງພໍອ້ອມຮອບ amplifier for air circulation, especially around the heatsink. Avoid mounting it directly on carpet or in enclosed spaces without airflow.

This image illustrates the dimensions of the Lanzar VIBE452N.6 amplifier: 20.47 inches in length, 10.25 inches in width, and 2.36 inches in height. These measurements are important for planning the installation location.

1. Mark the mounting holes using the amplifier as a template.
2. ເຈາະຮູທົດລອງຖ້າຈໍາເປັນ.
3. ຮັບປະກັນ amplifier ໂດຍໃຊ້ screws mounts ສະຫນອງໃຫ້.

2. ການເຊື່ອມຕໍ່ໄຟຟ້າແລະດິນ

These connections are critical for amplifier performance and safety. Use appropriate gauge wiring (e.g., 4-gauge for power and ground) and ensure secure, corrosion-free connections.

• ພະລັງງານ (BATT+): Connect a fused power cable directly from the positive terminal of your vehicle's battery to the BATT+ terminal on the amplifier. The fuse holder should be located within 18 inches of the battery.
• ດິນ (GND): Connect a ground cable of the same gauge as the power cable to a clean, unpainted metal surface of the vehicle's chassis. Ensure a solid electrical connection.
• ການເປີດທາງໄກ (REM): ເຊື່ອມຕໍ່ສາຍເປີດທາງໄກຈາກທາງໄກຂອງຫົວຫນ່ວຍຂອງທ່ານໄປຫາເຄື່ອງ REM ຢູ່ເຄື່ອງ ampຕົວຊີ້ບອກ. ສາຍນີ້ສັນຍານ amplifier ເພື່ອເປີດແລະປິດດ້ວຍຫົວຫນ່ວຍຂອງທ່ານ.

3. RCA Input Connections

Connect the RCA output cables from your head unit to the corresponding RCA input jacks on the amplifier (CH1/2 and CH3/4).

4. ການເຊື່ອມຕໍ່ລໍາໂພງ

ເຊື່ອມຕໍ່ລໍາໂພງຂອງທ່ານກັບ amplifier's speaker terminals. Pay close attention to polarity (+ and -). The VIBE452N.6 is a 4-channel amplifier, allowing for various configurations:

• ສະເຕີລິໂອ 4 ຊ່ອງ: Connect four speakers, one to each channel output.
• ເຊື່ອມຕໍ່ 2 ຊ່ອງ: Bridge two channels to power two subwoofers or high-power speakers. Refer to the amplifier's terminal markings for bridged connections.
• Tri-Mode: A combination of stereo and bridged modes.

Ensure the total impedance of your speakers matches the amplifier's capabilities (2 Ohm stereo stable, 4 Ohm bridged stable).

This image shows the Lanzar VIBE452N.6 amplifier installed in a vehicle's trunk, connected to subwoofers, demonstrating a typical installation scenario.

5. Remote Subwoofer Bass Control Connection

Connect the remote bass control module to the designated "REMOTE" port on the amplifier. Mount the control module in a convenient location for easy access.

ຄໍາແນະນໍາການດໍາເນີນງານ

1. ການເປີດພະລັງງານເບື້ອງຕົ້ນ

After all connections are made, reconnect the vehicle's battery. Turn on your head unit. The ampໄຟ LED ສະແດງພະລັງງານຂອງເຄື່ອງເພີ່ມພະລັງງານຄວນຈະສະຫວ່າງຂຶ້ນ, ຊີ້ບອກວ່າມັນກຳລັງຮັບພະລັງງານ ແລະ ເຮັດວຽກໄດ້.

2. Setting Input Level (Gain)

The input level controls (GAIN) match the ampຄວາມອ່ອນໄຫວຕໍ່ການປ້ອນຂໍ້ມູນຂອງຕົວຂະຫຍາຍສຽງຕໍ່ກັບຜົນຜະລິດຂອງຫົວໜ່ວຍຂອງທ່ານ. ການຕັ້ງຄ່າ gain ທີ່ບໍ່ຖືກຕ້ອງສາມາດນໍາໄປສູ່ການບິດເບືອນ ຫຼື ຫຼຸດລົງຂອງລະດັບໄດນາມິກ.

1. ເລີ່ມຕົ້ນດ້ວຍ ampການຄວບຄຸມການເພີ່ມກຳລັງຂອງຕົວເພີ່ມກຳລັງຖືກຕັ້ງໄວ້ທີ່ຕໍ່າສຸດ.
2. ຕັ້ງລະດັບສຽງຂອງຫົວໜ່ວຍຂອງທ່ານໃຫ້ປະມານ 75-80% ຂອງລະດັບສຽງສູງສຸດ.
3. ຄ່ອຍໆ​ເພີ່ມ​ຂຶ້ນ​ ampການຄວບຄຸມການເພີ່ມສຽງຂອງຕົວຂະຫຍາຍສຽງຈົນກວ່າທ່ານຈະໄດ້ຍິນສຽງບິດເບືອນເລັກນ້ອຍ, ຈາກນັ້ນຫຼຸດມັນລົງເລັກນ້ອຍ.
4. Repeat for all channels.

3. Crossover Adjustment (HIGH/LOW PASS)

The variable high-pass and low-pass crossovers allow you to direct specific frequency ranges to your speakers or subwoofers.

• ການກັ່ນຕອງສູງຜ່ານ (HPF): Used for full-range speakers to block low frequencies that they cannot reproduce effectively, preventing distortion and improving clarity. Adjust the HPF frequency to suit your speakers.
• Low-Pass Filter (LPF): Used for subwoofers to block high frequencies, ensuring they only reproduce bass. Adjust the LPF frequency to blend smoothly with your full-range speakers.

4. Bass Boost Control

The bass boost circuit provides additional low-frequency enhancement. Use this feature sparingly to avoid distortion and potential speaker damage. The remote bass control allows for convenient adjustment.

5. ການເຮັດວຽກຂອງໂໝດເຊື່ອມຕໍ່

When operating in bridged mode, ensure the connected speaker or subwoofer has an impedance of 4 Ohms or higher. Refer to the wiring diagram in the Quick Start Guide for correct connections.

ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: ເຊັດເປັນໄລຍະ ampດ້ານນອກຂອງ lifier ດ້ວຍຜ້າອ່ອນໆ, ແຫ້ງ. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງຫຼືເຄື່ອງເຮັດຄວາມສະອາດຂັດ.
• ການລະບາຍອາກາດ: ຮັບປະກັນວ່າຄິ້ວລະບາຍຄວາມຮ້ອນຍັງຄົງມີຂີ້ຝຸ່ນ ແລະສິ່ງເສດເຫຼືອຢ່າງຈະແຈ້ງເພື່ອຮັກສາຄວາມເຢັນທີ່ເໝາະສົມ.
• ການເຊື່ອມຕໍ່: Periodically check all power, ground, RCA, and speaker connections for tightness and corrosion. Loose connections can cause performance issues or damage.
• ການທົດແທນຟິວ: If a fuse blows, replace it only with a fuse of the same type and rating (30A x 3). Using an incorrect fuse can cause serious damage or fire.

ການແກ້ໄຂບັນຫາ

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information or technical support, please refer to the contact details provided in your Quick Start Guide or visit the official Lanzar webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.