ແນະນຳ
This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your Vrabocry 5V 5050 RGB LED Strip Light. Please read this manual thoroughly before use to ensure proper functionality and safety.
ເນື້ອໃນຊຸດ
ກວດສອບວ່າລາຍການທັງຫມົດທີ່ລະບຸໄວ້ຂ້າງລຸ່ມນີ້ແມ່ນລວມຢູ່ໃນຊຸດຂອງທ່ານ:
- 4 x LED Strip Lights (each 1.64ft / 50cm)
- 1 x 44-Key IR Remote Control (battery not included)
- 1 x USB Controller Cable
- 3 x Strip Connector Cables
Image: All components included in the Vrabocry LED Strip Light package.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ປະເພດ LED | SMD 5050 RGB |
| ຄວາມຍາວແຖບ | 4 x 1.64ft (50cm) sections |
| ຄວາມກວ້າງຂອງ PCB | 10ມມ |
| ປະລິມານ LEDs | 30 LEDs per 50cm section |
| ສີ LED | RGB (Multi-color) |
| ວິທີການຄວບຄຸມ | ຣີໂໝດຄວບຄຸມອິນຟາເຣດ 44 ປຸ່ມ |
| ການເຮັດວຽກ Voltage | USB DC 5V |
| ອັດຕາການກັນນໍ້າ | IP30 (Non-Waterproof) |
| ກາວ | Double-sided tape on back |
| ການນຳໃຊ້ພາຍໃນ/ນອກ | ໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ |
ຂໍ້ມູນຄວາມປອດໄພ
- This LED strip light is designed for ໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ. It is not waterproof (IP30 rated). Avoid exposure to water or high humidity.
- Ensure the power source is 5V DC USB. Using an incorrect voltage ອາດຈະທໍາລາຍຜະລິດຕະພັນ.
- Do not cover the LED strips with flammable materials when in operation.
- ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
ເພື່ອຕິດຕັ້ງໄຟ LED ແບບເລື່ອນ, ໃຫ້ປະຕິບັດຕາມຂັ້ນຕອນຕໍ່ໄປນີ້:
- ການກະກຽມຫນ້າດິນ: Clean the surface where the LED strips will be installed. Ensure it is dry and free of dust or grease for optimal adhesive performance.
- ຕິດຕັ້ງຫມໍ້ໄຟໄລຍະໄກ: Open the battery compartment on the back of the 44-key IR remote control and insert a CR2025 button cell battery (not included), ensuring correct polarity.
- Connect the Strips: Connect the individual LED strip sections using the provided strip connector cables. Ensure the arrows on the connectors align with the '+' markings on the LED strips for proper electrical connection.
- Connect to USB Controller: Attach the assembled LED strip to the USB controller cable.
- ຕິດແຖບ: Peel off the protective backing from the double-sided tape on the back of the LED strips. Firmly press the strips onto the cleaned surface. For long-term use, consider reinforcing the adhesive with additional glue or by gently heating the tape with a hairdryer before application to improve adhesion.
- Cutting the Strips (Optional): The LED strips can be cut at designated marks (usually indicated by a scissor icon or copper pads) to fit specific lengths. Cut only along these marks to avoid damaging the circuit.
- ເປີດ: Plug the USB controller into a 5V USB power source (e.g., TV USB port, USB wall adapter, power bank).
Image: Remote control battery compartment. Battery is not included.
Image: Visual guide for surface preparation, strip connection, and cutting points.
ຄໍາແນະນໍາການດໍາເນີນງານ
Use the 44-key IR remote control to manage your LED strip lights:
Image: 44-Key IR Remote Control layout and functions.
- ເປີດ/ປິດ: ກົດ ເປີດ/ປິດ ປຸ່ມ.
- ການປັບຄວາມສະຫວ່າງ: ໃຊ້ ຄວາມສະຫວ່າງ + ແລະ ຄວາມສະຫວ່າງ - arrows to increase or decrease light intensity.
- ສີຄົງທີ່: Select from 20 preset static colors, including Red, Green, Blue, and White, by pressing the corresponding color buttons.
- DIY Color Setting:
- ກົດປຸ່ມ ໜຶ່ງ ໃນ DIY1 ກັບ DIY6 ປຸ່ມ.
- ໃຊ້ ສີແດງ, ສີຂຽວ, ສີຟ້າ arrow buttons (e.g., Red+, Red-) to adjust the intensity of each primary color.
- ກົດຄືກັນ DIY button again to save your custom color.
- ໂໝດໄດນາມິກ:
- ອັດຕະໂນມັດ: Cycles through various dynamic modes automatically.
- ໄວ/ຊ້າ: Adjusts the speed of dynamic modes.
- JUMP3/JUMP7: Jumps between 3 or 7 different colors.
- FADE3/FADE7: Fades between 3 or 7 different colors.
- ກະແສໄຟຟ້າ: Flashes through different colors.
ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: Gently wipe the LED strips with a dry, soft cloth to remove dust. Do not use liquid cleaners or immerse in water.
- ກາວ: If the adhesive tape loses its stickiness over time, you may reinforce it with additional double-sided tape or a suitable adhesive.
- ການເກັບຮັກສາ: When not in use for extended periods, store the LED strips in a cool, dry place away from direct sunlight.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| LED strips do not light up. | No power, incorrect connection, remote battery depleted. | Ensure USB power source is active. Check all connections, especially arrow alignments. Replace remote battery. |
| ການຄວບຄຸມໄລຍະໄກບໍ່ເຮັດວຽກ. | Battery depleted, IR receiver blocked, remote too far. | Replace remote battery. Ensure clear line of sight between remote and IR receiver on the USB controller. Operate within 5-8 meters. |
| ສີບໍ່ຖືກຕ້ອງຫຼືບໍ່ສອດຄ່ອງກັນ. | Incorrect connection, faulty strip section. | Verify all strip connector cables are correctly aligned (arrow to '+'). If one section is consistently problematic, it may be faulty. |
| Adhesive tape not sticking well. | Surface not clean, cold temperature. | Clean surface thoroughly. Gently heat the adhesive tape with a hairdryer before application to improve stickiness. Consider additional adhesive. |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Specific warranty information for this product is not provided in the available documentation. For warranty inquiries or technical support, please contact Vrabocry customer service through your purchase platform or the manufacturer's official contact channels.
