ແນະນຳ
This manual provides essential instructions for the safe and effective operation of your ESKY 150 EC Micro RC Helicopter. The 150 EC is a third-generation micro remote-controlled helicopter designed for ease of operation. It features a 6-axis gyroscope for stable flight, atmospheric pressure and altitude hold capabilities, hovering, and a controllable flight path. It also includes a one-button shutdown function for emergency situations.
ແມ່ນຫຍັງຢູ່ໃນກ່ອງ
Carefully unpack all components and ensure all items listed below are present. If any items are missing or damaged, please contact customer support.
- 1 x ESKY 150 EC Helicopter
- 1 x MINI 6X 6-Channel 2.4GHz Transmitter (Remote Control)
- 1 x 1S 3.7V 150mAh 20C Li-Po Battery (for helicopter)
- 2 x Main Blades (spare)
- 1 x Tail Blade (spare)
- 1 x ເຄື່ອງສາກ USB
- 2 x Screw Drivers
- 1 x ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
Image: All components included in the ESKY 150 EC package.
ສິນຄ້າເກີນview
ອົງປະກອບຂອງເຮລິຄອບເຕີ
ຮູບພາບ: ຂ້າງ view of the ESKY 150 EC helicopter.
The ESKY 150 EC helicopter features a durable frame, main rotor blades, a tail rotor, landing skids, and a removable canopy. The main rotor provides lift and control, while the tail rotor controls yaw (left/right rotation).
ການຄວບຄຸມໄລຍະໄກ (ເຄື່ອງສົ່ງສັນຍານ)
The MINI 6X 6-Channel 2.4GHz transmitter is used to control the helicopter. Familiarize yourself with its various controls:
Image: Labeled diagram of the MINI 6X Remote Control.
- ສະຫຼັບໂໝດ: Changes flight modes (e.g., beginner/advanced).
- ຕົວຊີ້ວັດໄຟ LED: ສະແດງສະຖານະພະລັງງານ.
- ສະຫຼັບຕັດ Throttle: Immediately cuts power to the motor.
- Rudder (Left/Right): Controls the helicopter's yaw.
- Throttle (Up/Down): Controls the main rotor speed and altitude.
- Aileron (Left/Right): Controls the helicopter's roll (side-to-side movement).
- Elevator (Up/Down): Controls the helicopter's pitch (forward/backward movement).
- Trim Controls (Throttle, Rudder, Aileron, Elevator): Fine-tune controls to correct unwanted drift.
- ສັບປ່ຽນພະລັງງານ: Turns the remote control ON/OFF (hold down for ON/OFF).
ຕັ້ງຄ່າ
1. ການສາກແບັດເຕີຣີເຮລິຄອບເຕີ
The helicopter uses a 1S 3.7V 150mAh Li-Po battery. Always use the provided USB charger.
- Connect the USB charger to a USB power source (e.g., computer USB port, USB wall adapter).
- Connect the helicopter battery to the USB charger. Ensure the polarity is correct.
- ໄຟສັນຍານເທິງເຄື່ອງສາກຈະສະແດງສະຖານະການສາກ (ອ້າງອີງຄຳແນະນຳຂອງເຄື່ອງສາກສຳລັບຮູບແບບໄຟສະເພາະ).
- Once charging is complete, disconnect the battery from the charger. Do not overcharge.
Image: Connecting the Li-Po battery to the USB charger.
2. Installing the Helicopter Battery
Ensure the helicopter is powered off before installing the battery.
- Gently remove the helicopter's canopy to access the battery compartment.
- Insert the charged Li-Po battery into the compartment.
- Connect the battery plug to the helicopter's power port.
- Carefully reattach the canopy.
Image: Helicopter with canopy removed, revealing the battery compartment.
Image: Battery inserted into the helicopter.
3. ການເປີດເຄື່ອງ ແລະ ການຜູກມັດ
The helicopter and remote control must be bound (paired) before flight.
- ວາງ helicopter ເທິງພື້ນຜິວທີ່ຮາບພຽງ.
- Ensure the remote control's throttle stick is in the lowest position.
- ເປີດສະວິດໄຟຂອງເຮລິຄອບເຕີ. ໄຟສັນຍານຂອງເຮລິຄອບເຕີຈະກະພິບ.
- Press and hold the Power Switch on the remote control until it turns on. The remote control's indicator light will flash.
- Wait for a few seconds. The indicator lights on both the helicopter and remote control should become solid, indicating a successful binding.
- ຖ້າການເຊື່ອມໂຍງລົ້ມເຫຼວ, ໃຫ້ປິດອຸປະກອນທັງສອງ ແລະ ເຮັດຊ້ຳຂັ້ນຕອນ.
ຄໍາແນະນໍາການດໍາເນີນງານ
Always operate the helicopter in an open, safe area, away from people, animals, and obstacles. Ensure you have sufficient space for flight.
ການຄວບຄຸມການບິນພື້ນຖານ
- ຄັນເລັ່ງ (ໄມ້ຄ້ອນຊ້າຍຂຶ້ນ/ລົງ): Increases or decreases the main rotor speed, controlling ascent and descent.
- Rudder (Left Stick Left/Right): Controls the helicopter's rotation around its vertical axis (yaw).
- Elevator (Right Stick Up/Down): Controls forward and backward movement (pitch).
- Aileron (Right Stick Left/Right): Controls side-to-side movement (roll).
ຍົນຂຶ້ນ ແລະລົງຈອດ
- ຍົນອອກ: Slowly push the throttle stick up. The helicopter will gain altitude. Maintain a steady throttle to achieve a stable hover.
- ການລົງຈອດ: Slowly pull the throttle stick down. The helicopter will descend. Reduce throttle completely upon landing.
Altitude Hold and Hover
The 150 EC is equipped with a 6-axis gyroscope and atmospheric pressure sensor for stable flight and altitude hold. Once the helicopter reaches a desired altitude, release the throttle stick to its center position. The helicopter will attempt to maintain its current height.
Flight Modes (Hi/Lo)
The remote control features a Mode Switch. It is recommended to use the "Hi" mode for more stable and responsive flight. The "Lo" mode may exhibit a slight delay in controller response.
One-Button Shutdown
In an emergency or if the helicopter is out of control, use the Throttle Cut Switch to immediately stop the motors. This function can also be used for a quick, controlled shutdown after landing.
ບໍາລຸງຮັກສາ
ທໍາຄວາມສະອາດ
Wipe the helicopter and remote control with a soft, dry cloth after each use. Avoid using water or chemical cleaners, as they can damage electronic components.
ການປ່ຽນແຜ່ນໃບ
If main or tail blades become damaged, replace them with the provided spares using the included screwdriver. Ensure blades are securely fastened but not overtightened.
ຮູບພາບ: ລາຍລະອຽດ views of helicopter components, including rotor attachment points.
ການດູແລຫມໍ້ໄຟ
- ໃຊ້ເຄື່ອງສາກຕົ້ນສະບັບສະເໝີ.
- ຫ້າມສາກແບັດເຕີລີເກີນ ຫຼືປ່ອຍປະໄວ້ຫຼາຍເກີນໄປ.
- ເກັບຮັກສາຫມໍ້ໄຟໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງແລະຄວາມຮ້ອນ.
- If the battery swells or shows signs of damage, discontinue use immediately and dispose of it properly.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ເຮລິຄອບເຕີບໍ່ຕອບສະໜອງຕໍ່ການຄວບຄຸມໄລຍະໄກ. | Not bound, low battery (helicopter or remote), power off. | Ensure both devices are powered on. Re-bind the helicopter and remote control. Charge helicopter battery. Replace remote control batteries. |
| Helicopter drifts during hover. | Uneven trim settings, slight wind, unbalanced blades. | Adjust trim controls on the remote control. Operate in a calm environment. Check blades for damage and replace if necessary. |
| ເຮລິຄອບເຕີບໍ່ຂຶ້ນ. | Low helicopter battery, damaged blades, throttle not advanced enough. | Charge helicopter battery. Check and replace damaged blades. Slowly increase throttle. |
| ເວລາບິນສັ້ນ. | ແບັດເຕີຣີບໍ່ໄດ້ສາກເຕັມ, ແບັດເຕີຣີເກົ່າ. | Ensure battery is fully charged. Consider replacing the battery if it's old or damaged. |
ຂໍ້ມູນຈໍາເພາະ
- ໝາຍເລກຕົວແບບ: 150 EC
- ຜູ້ຜະລິດ: ESKY
- ລະບົບຄວບຄຸມ: Gyroscope 6 ແກນ
- ຄຸນສົມບັດ: Height Hold, Hover, One-button Shutdown
- ໝໍ້ໄຟເຮລິຄອບເຕີ: 1S 3.7V 150mAh Li-Po (included)
- ການຄວບຄຸມໄລຍະໄກ: MINI 6X 6-Channel 2.4GHz Transmitter
- ອາຍຸທີ່ແນະນໍາ: 14 ປີຂຶ້ນໄປ
- ນ້ໍາຫນັກລາຍການ: ປະມານ 1.05 ປອນ (ລວມທັງການຫຸ້ມຫໍ່)
- ຂະໜາດແພັກເກດ: 8.3 x 7.1 x 3.8 ນິ້ວ
Image: ESKY 150 EC Helicopter dimensions.
ຂໍ້ແນະນຳຄວາມປອດໄພ
Please read and adhere to these safety guidelines to prevent injury or damage.
- Always operate the helicopter in an open area, away from people, pets, and obstacles.
- Do not fly near power lines, roads, or water bodies.
- Keep fingers and loose clothing away from rotating blades.
- Never fly in strong winds or adverse weather conditions.
- ແນະນຳໃຫ້ຜູ້ໃຊ້ທີ່ມີອາຍຸຕ່ຳກວ່າ 14 ປີມີຜູ້ໃຫຍ່ເປັນຜູ້ໃຫ້ຄຳແນະນຳ.
- Do not attempt to modify the helicopter or its components.
- ປິດເຮລິຄອບເຕີ ແລະ ຣີໂໝດຄວບຄຸມເມື່ອບໍ່ໄດ້ໃຊ້ງານ.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Information regarding product warranty and customer support contact details is not available in the provided product data. Please refer to the product packaging or the seller's website for specific warranty terms and support options.
ວິດີໂອຜະລິດຕະພັນຢ່າງເປັນທາງການ
No official product videos from the seller were provided in the product data.
