PowMr 12.8V 100Ah

PowMr 12V 100Ah LiFePO4 Lithium Battery User Manual

ຮຸ່ນ: 12.8V 100Ah

1. ບົດແນະນຳ

This manual provides essential information for the safe and efficient use of your PowMr 12V 100Ah LiFePO4 Lithium Battery. This battery is designed for various applications including solar systems, RVs, boats, and off-grid setups, offering a reliable and long-lasting power solution. Please read this manual thoroughly before installation and operation.

2. ຂໍ້ມູນຄວາມປອດໄພ

Always prioritize safety when handling batteries. Failure to follow these instructions may result in serious injury, property damage, or damage to the battery.

A Special Reminder icon

Image: A special reminder icon, emphasizing important safety notes.

3. ເນື້ອໃນຊຸດ

ເມື່ອເປີດຊຸດ, ກວດເບິ່ງວ່າອົງປະກອບທັງຫມົດແມ່ນປະຈຸບັນແລະບໍ່ເສຍຫາຍ:

Video: Unboxing the PowMr 12V 100Ah LiFePO4 Lithium Battery, showing the battery, terminals, and screws. This video provides a visual guide to the package contents.

PowMr 12V 100Ah LiFePO4 Battery with M8 Terminal Bolts

Image: The PowMr 12V 100Ah LiFePO4 battery with M8 terminal bolts, illustrating the included hardware.

4. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

Diagram of BMS protection features

Image: A diagram illustrating the various protections offered by the built-in 100A BMS, including overcharge, overdischarge, overcurrent, short circuit, cell voltage, ແລະການປ້ອງກັນອຸນຫະພູມສູງ.

Comparison of LiFePO4 battery with lead-acid batteries

Image: A visual comparison highlighting the advantages of the PowMr LiFePO4 battery over traditional lead-acid batteries in terms of weight, cycle life, service life, and depth of discharge.

5. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

5.1. ການກວດກາເບື້ອງຕົ້ນ

Before installation, inspect the battery for any physical damage. Ensure the terminals are clean and free of corrosion.

5.2. ການເຊື່ອມຕໍ່ຫມໍ້ໄຟ

Connect the battery to your system using appropriate cables and connectors. Ensure correct polarity: positive (+) to positive and negative (-) to negative. Use the provided M8 terminal bolts to secure connections tightly.

ແຜນຜັງການເຊື່ອມຕໍ່ຫມໍ້ໄຟ

Image: A diagram showing how to connect batteries, indicating positive and negative terminals.

5.3. ການເຊື່ອມຕໍ່ແບບອະນຸກົມ ແລະ ແບບຂະໜານ

The PowMr 12V 100Ah LiFePO4 battery supports both series and parallel connections to achieve higher voltage or capacity. It can be connected in series up to 4 units (4S) and in parallel up to 4 units (4P), allowing for configurations such as 4S4P for a maximum of 51.2V and 400Ah.

Diagram showing 4S4P battery configuration

Image: A diagram illustrating various expandable capacity configurations, including a 4S4P setup for maximum energy storage.

Solar system diagram with LiFePO4 battery

Image: A schematic showing the PowMr LiFePO4 battery integrated into a solar power system, connecting solar panels, an MPPT controller, and an inverter to power various household loads.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

6.1. ການສາກໄຟ

The battery supports a 50A charging current. Use a compatible LiFePO4 charger or a solar charge controller (MPPT recommended) designed for lithium iron phosphate batteries. Ensure the charging voltage is within the recommended range (typically 14.2V - 14.6V).

Battery charger and solar panel setup

Image: A split image showing the battery being charged by a dedicated battery charger on one side and a solar panel setup with an MPPT controller charging the battery on the other.

6.2. ການປ່ອຍນໍ້າ

The battery supports a 100A continuous discharge current. The built-in BMS will protect the battery from over-discharge. Ensure your load does not exceed the maximum continuous discharge current to prevent the BMS from triggering protection mode.

6.3. ອຸນຫະພູມປະຕິບັດການ

Observe the recommended operating temperature ranges:

Temperature range indicator

Image: A thermometer graphic indicating the safe operating temperature range for the battery.

7. ບໍາລຸງຮັກສາ

8. ການແກ້ໄຂບັນຫາ

If you encounter issues with your PowMr LiFePO4 battery, refer to the following common problems and solutions:

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
ແບັດເຕີຣີບໍ່ໄດ້ສາກCharger not connected, charger fault, BMS protection triggered (over-discharge, over-voltage, low temperature)Check charger connection and functionality. Verify charging parameters. Allow battery to warm up if too cold. If BMS is in protection, disconnect load/charger for a few minutes to reset.
ແບັດເຕີຣີບໍ່ອອກBMS protection triggered (over-discharge, overcurrent, high temperature), loose connectionsCheck all connections. Reduce load if overcurrent. Allow battery to cool down if too hot. Recharge the battery if it's in over-discharge protection.
Reduced capacity/runtimeAging battery, improper charging, extreme operating temperaturesຮັບປະກັນປະລິມານການສາກໄຟທີ່ເໝາະສົມtage and current. Operate within recommended temperature ranges. If battery is very old, consider replacement.

If the problem persists after attempting these solutions, please contact PowMr customer support.

9. ຂໍ້ມູນຈໍາເພາະ

ພາລາມິເຕີມູນຄ່າ
ຍີ່ຫໍ້PowMr
ຕົວແບບ12.8V 100Ah
ປະເພດຫມໍ້ໄຟLiFePO4 (Lithium Iron Phosphate)
ປະລິມານນາມtage12.8V
ຄວາມອາດສາມາດນາມ100 Ah
ພະລັງງານ1280Wh
ສູງສຸດ ກຳ ລັງສາກໄຟtage14.6V
ສູງສຸດ. ການສາກໄຟຢ່າງຕໍ່ເນື່ອງ50A
ສູງສຸດ. ກະແສໄຫຼອອກຢ່າງຕໍ່ເນື່ອງ100A
BMS ໃນຕົວ100A
ວົງຈອນຊີວິດ4000+ cycles (100% DoD)
ຂະໜາດ (L*W*H)325*170*215mm (12.79"D x 6.69"W x 8.46"H)
ນ້ຳໜັກ11.5 ກິ​ໂລກ​ຣາມ
ປະເພດ TerminalM8 Terminal
ການປະເມີນກັນນ້ໍາIP65
ອຸນຫະພູມການສາກໄຟ0°C ຫາ 50°C
ອຸນຫະພູມລະບາຍ-20°C ເຖິງ 60°C
ອຸນຫະພູມການເກັບຮັກສາ-10°C ເຖິງ 50°C
PowMr 12.8V 100Ah LiFePO4 Battery with specifications table

Image: The PowMr 12.8V 100Ah LiFePO4 battery displayed alongside a table summarizing its key technical specifications.

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ສຳລັບຂໍ້ມູນການຮັບປະກັນ, ການຊ່ວຍເຫຼືອດ້ານເຕັກນິກ, ຫຼື ການສອບຖາມກ່ຽວກັບການບໍລິການ, ກະລຸນາອ້າງອີງເຖິງ PowMr ຢ່າງເປັນທາງການ webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

PowMr Official Webເວັບໄຊ: www.powr.com