Sena 10S Motorcycle Bluetooth Headset Communication System User Manual

1. ຜະລິດຕະພັນເກີນview

The Sena 10S Bluetooth motorcycle headset and intercom system kit is designed to facilitate seamless communication among riders. It supports full duplex, dual pairing for clear and natural conversations.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• Bluetooth 4.1 and Universal Intercom for broad compatibility.
• Crystal-clear HD audio with Advanced Noise Control for superior sound quality.
• Intercom communication range of up to 1.6 km (1.0 mi) in open terrain.
• Supports up to 4 riders for group communication.
• Smartphone pairing for music, GPS navigation, and phone calls.
• Talk time of 12 hours on a single charge.

ຮູບ 1.1: ດ້ານຫນ້າ view of the Sena 10S Motorcycle Bluetooth Headset.

2. ເນື້ອໃນຊຸດ

The Sena 10S Communication System package typically includes the following items:

• Sena 10S Headset Unit(s)
• ຊຸດ ລຳ ໂພງ
• ໄມໂຄຣໂຟນຂະຫຍາຍຕົວຢ່າງ
• ໄມໂຄຣໂຟນທີ່ມີສາຍ
• ການຕິດຕັ້ງ Clamp ຊຸດ
• ສາຍໄຟ USB ແລະຂໍ້ມູນ
• ສາຍສຽງ
• ແຜ່ນ Velcro ສໍາລັບລໍາໂພງ
• ໄມໂຄຣໂຟນ Sponges

Figure 2.1: All components included in the Sena 10S package.

3. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

3.1 ການສາກອຸປະກອນ

Before initial use, fully charge the Sena 10S headset. Connect the provided USB power & data cable to the headset's charging port and a USB power source. A full charge typically takes approximately 3 hours. The LED indicator will change color to indicate charging status.

ຮູບ 3.1: ຂ້າງ view of the Sena 10S unit, showing the USB charging port.

3.2 Mounting on a Helmet

The Sena 10S can be mounted on most motorcycle helmets using the included clamp kit. Follow these general steps:

1. ຖອດ screws ຢູ່ດ້ານຫລັງຂອງ clamp ໜ່ວຍ.
2. ເລື່ອນ clamp unit between the outer shell and the inner padding of your helmet, positioning it on the left side.
3. Tighten the screws to secure the clamp.
4. Attach the main headset unit to the clamp.
5. Install the speakers inside the helmet, aligning them with your ears. Use the Velcro pads if necessary.
6. Connect the microphone (boom or wired) to the headset unit and position it appropriately for clear voice pickup.

Figure 3.2: Sena 10S headset mounted on a motorcycle helmet.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

4.1 ເປີດ/ປິດ

• ເປີດ: Press and hold the Phone Button and the Jog Dial for 1 second.
• ປິດພະລັງງານ: Tap the Phone Button and the Jog Dial simultaneously.

4.2 ການຄວບຄຸມປະລິມານ

Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume.

4.3 Bluetooth Pairing (Smartphone)

To pair your smartphone with the Sena 10S for music, GPS, and phone calls:

1. With the headset off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately.
2. On your smartphone, enable Bluetooth and search for devices.
3. Select 'Sena 10S' from the list of found devices.
4. If prompted, enter '0000' for the PIN.

4.4 ການສື່ສານລະຫວ່າງລະບົບ

The Sena 10S supports intercom communication with up to 4 riders. Ensure all devices are powered on and within range.

• Pairing with another Sena headset: Press and hold the Jog Dial of both units for 5 seconds until the LEDs flash red. Tap the Jog Dial on either unit to complete pairing.
• Starting/Ending Intercom: Tap the Jog Dial once to start or end a conversation with the first paired intercom friend. Tap twice for the second, and three times for the third.

4.5 Music Streaming and Phone Calls

• ຫຼິ້ນ/ຢຸດດົນຕີ: ກົດ Jog Dial ຄ້າງໄວ້ 1 ວິນາທີ.
• ຮັບ/ສາຍໂທ: ແຕະປຸ່ມໂທລະສັບ.
• ການໂທດ້ວຍສຽງ: ກົດປຸ່ມໂທລະສັບຄ້າງໄວ້ 3 ວິນາທີ.

5. ການບໍາລຸງຮັກສາແລະການດູແລ

To ensure the longevity and optimal performance of your Sena 10S headset, follow these maintenance guidelines:

• ຮັກສາອຸປະກອນໃຫ້ແຫ້ງ. ຄວາມຊຸ່ມສາມາດທຳລາຍວົງຈອນພາຍໃນໄດ້.
• ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງ, ສານລະລາຍທໍາຄວາມສະອາດ, ຫຼືຢາຊັກຟອກທີ່ເຂັ້ມແຂງເພື່ອເຮັດຄວາມສະອາດອຸປະກອນ.
• Clean the microphone and speaker grilles gently with a soft, dry cloth.
• ເກັບຮັກສາອຸປະກອນໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງເມື່ອບໍ່ໄດ້ໃຊ້.
• ສາກແບັດເຕີລີເປັນປະຈຳ, ເຖິງແມ່ນວ່າບໍ່ໄດ້ໃຊ້, ເພື່ອຮັກສາສຸຂະພາບຂອງແບັດເຕີຣີ.

6. ການແກ້ໄຂບັນຫາ

If you encounter issues with your Sena 10S, try the following steps:

• ບໍ່ມີພະລັງງານ: Ensure the battery is charged. Connect to a power source and check if the charging indicator lights up.
• ບໍ່ມີສຽງ/ສຽງຕ່ຳ: Check volume settings on both the headset and your connected device. Ensure speakers are correctly positioned.
• ອິນເຕີຄອມບໍ່ເຊື່ອມຕໍ່: Verify both units are powered on and within range. Re-attempt intercom pairing.
• ການຕັດການເຊື່ອມຕໍ່ Bluetooth: Ensure your paired device is within range. Try re-pairing the device.
• ຣີເຊັດອຸປະກອນ: If issues persist, perform a factory reset (refer to the full user manual for specific instructions on your model).

7. ຂໍ້ກໍານົດດ້ານວິຊາການ

8. ວິດີໂອຜະລິດຕະພັນຢ່າງເປັນທາງການ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Sena website. For technical support, troubleshooting assistance, or further inquiries, please contact Sena customer service through their official channels.