Xnbada RC01RF Wireless 2.4G RF 4-Zone Single Color Remote Control User Manual

1. ບົດແນະນຳ

The Xnbada RC01RF is a wireless 2.4G RF remote control designed for single color LED strip lights. It offers 4-zone control, allowing you to manage multiple groups of LED strips independently or simultaneously. This remote features precise brightness adjustment and operates wirelessly up to 30 meters (98 feet), providing flexible control without complex wiring. It is compatible with Xnbada C01W, C01Z, and C01RF single color controllers.

2. ຂໍ້ມູນຄວາມປອດໄພ

• ອ່ານຄໍາແນະນໍາທັງຫມົດຢ່າງລະອຽດກ່ອນທີ່ຈະໃຊ້.
• ອຸປະກອນນີ້ມີຈຸດປະສົງເພື່ອໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ.
• Do not expose the remote control to moisture or extreme temperatures.
• ໃຊ້ພຽງແຕ່ແບັດເຕີຣີ AAA ຕາມທີ່ລະບຸໄວ້ເທົ່ານັ້ນ. ໃຫ້ແນ່ໃຈວ່າຂົ້ວທີ່ຖືກຕ້ອງເມື່ອໃສ່ແບັດເຕີຣີ.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
• Do not attempt to disassemble or repair the remote control. This will void the warranty.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ຊຸດ​ຂອງ​ທ່ານ​:

• Xnbada RC01RF Wireless Remote Control (Single Color)
• ຕົວຍຶດຕິດຝາ
• ນັອດກຽວຕິດຕັ້ງ (2x)

Image: The Xnbada RC01RF remote control shown with its included wall mount holder and two mounting screws.

4. ຜະລິດຕະພັນເກີນview

The RC01RF remote control features an intuitive layout for easy operation of your single color LED strip lights. Below is a diagram illustrating the functions of each button.

Image: Diagram showing the Xnbada RC01RF remote control with labels for each button's function, including ON/OFF, brightness adjustment, and zone selection.

• ປຸ່ມເປີດ: Press to turn ON all linked devices.
• ປຸ່ມປິດ: Press to turn OFF all linked devices.
• Brightness Ring: Touch the slider to adjust brightness from 1% to 100%.
• ເພີ່ມຄວາມສະຫວ່າງ (☀): ກົດເພື່ອເພີ່ມຄວາມສະຫວ່າງ.
• ຫຼຸດຄວາມສະຫວ່າງລົງ (☁): ກົດເພື່ອຫຼຸດຄວາມສະຫວ່າງ.
• ປຸ່ມ M: Cycles through dynamic modes (if supported by the connected controller for single color).
• ຄວາມສະຫວ່າງ 30%: Press to set brightness to 30%.
• ຄວາມສະຫວ່າງ 60%: Press to set brightness to 60%.
• ຄວາມສະຫວ່າງ 100%: Press to set brightness to 100%.
• S- Button: Decreases dynamic mode speed.
• S+ Button: Increases dynamic mode speed.
• Zone 1-4 Buttons: Press to select a specific zone for control. Press and hold to link/unlink a controller to that zone.

5. ຕັ້ງຄ່າ

5.1 ການຕິດຕັ້ງຫມໍ້ໄຟ

The RC01RF remote control requires two AAA batteries (not included).

1. ຊອກຫາຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢູ່ດ້ານຫຼັງຂອງຣີໂໝດ.
2. ເລື່ອນຝາປິດເປີດ.
3. ໃສ່ໝໍ້ໄຟ AAA ສອງໜ່ວຍ, ຮັບປະກັນການຂົ້ວທີ່ຖືກຕ້ອງ (+ ແລະ -).
4. ເລື່ອນຝາປິດຊ່ອງໃສ່ໝໍ້ໄຟຄືນໃສ່ບ່ອນເກົ່າຈົນກວ່າມັນຈະກົດຢ່າງປອດໄພ.

5.2 Pairing the Remote Control with a Controller

The RC01RF remote control uses 2.4G RF technology for a fast and direct connection to compatible controllers (e.g., C01W, C01Z, C01RF) without requiring Wi-Fi, Bluetooth, or an app.

1. Ensure your LED strip controller is powered off.
2. Power on the LED strip controller.
3. Within 3 seconds of powering on the controller, press and hold one of the Zone buttons (1, 2, 3, or 4) on the RC01RF remote control.
4. If pairing is successful, the connected LED strip will flash three times. This indicates the controller is now linked to the selected zone on your remote.
5. Repeat this process for other controllers if you wish to assign them to different zones (1-4). Each zone can control multiple controllers.

To unlink a controller from a zone, power cycle the controller, and within 3 seconds, press the corresponding Zone button 5 times quickly. The LED strip will flash 10 times to confirm unlinking.

5.3 ການຕິດຕັ້ງ Wall Mount

The included wall mount holder allows for convenient storage and access to your remote control.

1. Choose a suitable location on a wall or flat surface.
2. Use the wall mount holder as a template to mark the positions for the two mounting screws.
3. ເຈາະຮູທົດລອງຖ້າຈໍາເປັນ.
4. Secure the wall mount holder to the surface using the provided screws.
5. ສຽບ​ການ​ຄວບ​ຄຸມ​ຫ່າງ​ໄກ​ສອກ​ຫຼີກ​ເຂົ້າ​ໄປ​ໃນ​ທີ່​ຖື​.

Image: The Xnbada RC01RF remote control shown securely placed in its wall-mounted holder, demonstrating flexible placement options.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

6.1 Basic Control (All Zones)

• ເປີດ/ປິດ: ກົດ ON button to turn on all linked lights. Press the ປິດ button to turn off all linked lights.
• ການປັບຄວາມສະຫວ່າງ: ແຕະທີ່ ວົງຄວາມສະຫວ່າງ to smoothly adjust the light intensity from 1% to 100%. Alternatively, use the ຄວາມສະຫວ່າງຂຶ້ນ (☀) ແລະ ຄວາມສະຫວ່າງລົງ (☁) buttons for incremental adjustments.
• Preset Brightness: Use the dedicated buttons to quickly set brightness to 30%, 60%, ຫຼື 100%.

Image: An illustration demonstrating brightness adjustment using the remote control in a kitchen setting, showing a slider for precise control.

6.2 4-Zone Group Control

The RC01RF remote allows you to control up to four independent zones of single color LED strip lights.

• ເລືອກເຂດ: ກົດທີ່ຕ້ອງການ Zone button (1, 2, 3, or 4) to select that zone. Once selected, any commands (ON/OFF, brightness) will only apply to the controllers linked to that specific zone.
• Control All Zones: To control all linked zones simultaneously, ensure no specific zone button is actively selected (or press the currently active zone button again to deselect it, if applicable, or simply use the master ON/OFF).
• Auto-Transmission: The remote control utilizes an auto-transmission feature. If a controller is within 30 meters of another controller, the signal can be transmitted, extending the effective control distance for larger installations.

Image: Diagram illustrating the simultaneous auto-transmission feature, where the remote signal is relayed between controllers within a 30-meter range, extending control distance.

6.3 Dynamic Modes (if applicable)

If your connected single color controller supports dynamic modes (e.g., flashing, fading effects), you can activate them:

• ກົດ ປຸ່ມ M to cycle through available dynamic modes.
• ໃຊ້ S- ແລະ S+ buttons to decrease or increase the speed of the selected dynamic mode.

7. ບໍາລຸງຮັກສາ

7.1 ການທົດແທນຫມໍ້ໄຟ

When the remote control's range decreases or it becomes unresponsive, it may be time to replace the batteries.

1. ປະຕິບັດຕາມຂັ້ນຕອນໃນພາກ 5.1 ເພື່ອເປີດຊ່ອງໃສ່ຫມໍ້ໄຟ.
2. ເອົາແບັດ AAA ເກົ່າອອກ.
3. ໃສ່ແບັດເຕີຣີ AAA ໃໝ່ສອງກ້ອນ, ໂດຍສັງເກດເບິ່ງຂົ້ວທີ່ຖືກຕ້ອງ.
4. ປິດຊ່ອງໃສ່ຫມໍ້ໄຟ.

ຖິ້ມbatteriesໍ້ໄຟທີ່ໃຊ້ແລ້ວໄປຕາມກົດລະບຽບທ້ອງຖິ່ນ.

7.2 ການທໍາຄວາມສະອາດ

To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.

8. ການແກ້ໄຂບັນຫາ

9. ຂໍ້ມູນຈໍາເພາະ

Image: A visual representation of various compatible Xnbada LED controllers, including C01W, C02W, C03W, C04W, C05W, WB5, FUT037, C01Z, C02Z, C03Z, C04Z, C05Z, LM051, and LM053.

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Xnbada store on Amazon:

Xnbada Official Store

If you encounter any issues not covered in this manual, please contact Xnbada customer service for assistance.