IRRADIO Simplified Universal Remote Control with Learning Function

1. ບົດແນະນຳ

This manual provides detailed instructions for the setup, operation, and maintenance of your IRRADIO Simplified Universal Remote Control. This remote is designed for ease of use, featuring a learning function to replicate commands from your original remote control. Its simplified layout and large buttons make it suitable for users of all ages.

2. ຜະລິດຕະພັນເກີນview

The IRRADIO Simplified Universal Remote Control is an infrared remote with a minimalist design. It features essential buttons for common functions, making it straightforward to operate.

ຮູບພາບ 2.1: ດ້ານໜ້າ view of the IRRADIO Simplified Universal Remote Control. It features large, clearly labeled buttons for power, volume, channel, and two programmable auxiliary buttons (A and B).

ຟັງຊັນປຸ່ມ:

• ປຸ່ມເປີດປິດ (ສີແດງ): ເປີດ ຫຼື ປິດອຸປະກອນ.
• AV Button (Mute): Toggles audio mute or switches AV input (programmable).
• V+ / V-: ເພີ່ມ ຫຼື ຫຼຸດລະດັບສຽງ.
• P+ / P-: ປ່ຽນຊ່ອງຂຶ້ນ ຫຼື ລົງ.
• A / B Buttons: Two additional programmable buttons for frequently used functions.
• Indicator LED (Red dots): Lights up during button press and programming.

3. ການຕິດຕັ້ງ: ການຕິດຕັ້ງຫມໍ້ໄຟ

The remote control requires 2x AAA/LR03 1.5V batteries (not included).

1. ຊອກຫາຊ່ອງໃສ່ຫມໍ້ໄຟຢູ່ດ້ານຫຼັງຂອງການຄວບຄຸມໄລຍະໄກ.
2. ເລື່ອນເປີດcoverາປົກຊ່ອງຂອງbatteryໍ້ໄຟ.
3. Insert two AAA/LR03 batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. ປິດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢ່າງປອດໄພ.

ໝາຍເຫດ: The remote retains programmed memory even after battery replacement.

4. Operating Instructions: Programming the Remote Control

This universal remote uses a learning function to copy signals from your original remote control. You will need a functional original remote for programming.

ຂັ້ນຕອນການຂຽນໂປຣແກຣມ:

1. ການກະກຽມ: Place the IRRADIO universal remote and your original remote control on a flat surface, facing each other, with their infrared emitters aligned at a distance of approximately 1-3 cm.
2. ເຂົ້າສູ່ໂໝດການຮຽນຮູ້: ກົດຄ້າງໄວ້ ພະລັງງານ ປຸ່ມ ແລະ AV button simultaneously on the IRRADIO remote for about 3 seconds. The red indicator LED will light up continuously, indicating the remote is in learning mode.
3. ເລືອກປຸ່ມເພື່ອຂຽນໂປຣແກຣມ: Press the button on the IRRADIO remote that you wish to program (e.g., V+, P+, A, B). The red indicator LED will start blinking slowly, waiting for a signal.
4. ສົ່ງສັນຍານ: Press and hold the corresponding button on your original remote control (e.g., Volume Up, Channel Up). Keep holding it until the IRRADIO remote's LED blinks rapidly three times and then lights up continuously again. This indicates successful learning.
5. Program More Buttons: Repeat steps 3 and 4 for each button you wish to program.
6. Exit Learning Mode: ເມື່ອປຸ່ມທີ່ຕ້ອງການທັງໝົດຖືກຕັ້ງໂປຣແກຣມແລ້ວ, ໃຫ້ກົດປຸ່ມ ພະລັງງານ button on the IRRADIO remote to exit learning mode. The red indicator LED will turn off.

ໝາຍເຫດສຳຄັນ:

• If the LED does not blink rapidly or turns off during programming, the learning process may have failed. Try again, ensuring proper alignment and battery levels in both remotes.
• Ensure the original remote has sufficient battery power for signal transmission.
• The remote can be reprogrammed infinitely.

5. ບໍາລຸງຮັກສາ

ການປ່ຽນແບັດເຕີຣີ:

When the remote control's response becomes sluggish or the indicator LED does not light up, it is time to replace the batteries. Follow the battery installation steps in Section 3.

ທໍາຄວາມສະອາດ:

ເພື່ອທຳຄວາມສະອາດຣີໂໝດຄວບຄຸມ, ໃຫ້ໃຊ້ຜ້າອ່ອນແລະແຫ້ງ. ຢ່າໃຊ້ນ້ຳຢາທຳຄວາມສະອາດທີ່ມີສານຂັດ, ຕົວລະລາຍ, ຫຼື ຜ້າປຽກ, ເພາະວ່າສິ່ງເຫຼົ່ານີ້ສາມາດທຳລາຍພື້ນຜິວ ຫຼື ອົງປະກອບພາຍໃນໄດ້.

6. ການແກ້ໄຂບັນຫາ

• ໄລຍະໄກບໍ່ຕອບສະໜອງ:
  • ກວດເບິ່ງວ່າໃສ່ແບັດເຕີລີ່ຖືກໃສ່ຢ່າງຖືກຕ້ອງກັບຂົ້ວທີ່ຖືກຕ້ອງຫຼືບໍ່.
  • Replace old batteries with new AAA/LR03 batteries.
  • ໃຫ້ແນ່ໃຈວ່າບໍ່ມີສິ່ງກີດຂວາງລະຫວ່າງຣີໂໝດ ແລະອຸປະກອນ.
• Learning function fails:
  • Ensure the original remote control is working and has sufficient battery power.
  • Verify that the IRRADIO remote and the original remote are aligned correctly, facing each other at a close distance (1-3 cm).
  • Make sure you are pressing and holding the buttons for the required duration during programming.
  • Try programming in a room with less ambient light, as strong light sources can sometimes interfere with IR signals.
• Programmed button does not work:
  • The learning process might not have been successful for that specific button. Repeat the programming steps for that button.
  • Ensure the original remote's signal was strong and clear during programming.

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Irradio webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.