ຄູ່ມືຜູ້ໃຊ້ Rolls MX401 ເຄື່ອງປະສົມສຽງສະເຕີລິໂອ XLR 4 ຊ່ອງ

1. ບົດແນະນຳ

The Rolls MX401 is a compact and versatile 4-channel XLR Mic/Line Stereo Mixer designed for robust live and studio mixing applications. This manual provides detailed instructions to ensure proper setup, operation, and maintenance of your MX401 unit, allowing you to achieve optimal audio performance.

2. ຜະລິດຕະພັນເກີນview

The MX401 features four independent XLR inputs, each with dedicated controls for level, pan, and mic/line-level switching. It also includes individual phantom power for condenser microphones. The unit offers balanced XLR outputs and a 3.5mm stereo output for flexible connectivity. A convenient clip indicator light assists in setting appropriate input levels.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• 4 Balanced XLR Inputs
• Individual Level Control per Channel
• Individual Pan Control per Channel
• Mic/Line Level Switching per Channel
• Individual Phantom Power per Channel
• Master Output Level Control
• ແສງສະຫວ່າງຕົວຊີ້ວັດ Clip
• 2 Balanced XLR Outputs
• 1 x 3.5mm Stereo Output
• DC Power Supply or 9V Battery Operation

ຮູບ 1: ເທິງລົງລຸ່ມ view of the Rolls MX401 mixer, showing input and output labels.

Figure 2: Front panel of the Rolls MX401 mixer, displaying channel controls, output level, and power switch.

3. ຕັ້ງຄ່າ

3.1 ການ​ສ້າງ​ພະ​ລັງ​ງານ​ຫນ່ວຍ​ງານ​

The MX401 can be powered using the included DC power supply or two 9V batteries. Ensure the unit is switched OFF before connecting power.

• ພະລັງງານ DC: Connect the included DC power supply to the 'VDC' input jack on the front panel. Plug the power supply into an appropriate AC outlet.
• ພະລັງງານຫມໍ້ໄຟ: Open the battery compartment on the side of the unit and insert two fresh 9V batteries, observing correct polarity. Close the compartment securely.

3.2 Connecting Microphones and Line Inputs

The MX401 features four XLR inputs, each capable of accepting either microphone or line-level signals.

1. Connect your microphones or line-level devices to the XLR INPUTs (CH 1-4) on the rear panel.
2. For each channel, use the MIC / LINE switch to select the appropriate input level:
• ຕັ້ງເປັນ MIC for microphones.
• ຕັ້ງເປັນ ເສັ້ນ for line-level devices (e.g., keyboards, CD players).
3. If using condenser microphones, activate ພະລັງງານ PHANTOM for the respective channel by pressing the PHANTOM POWER button. The LED will illuminate when active.

3.3 ການເຊື່ອມຕໍ່ຜົນຜະລິດ

The MX401 provides balanced XLR outputs and a 3.5mm stereo output.

• Connect your main audio system (e.g., power amplifier, recording device) to the balanced XLR OUTPUTS (LEFT, RIGHT) ຢູ່ເທິງແຜງດ້ານຫລັງ.
• For connecting to consumer-grade audio equipment or headphones, use the 3.5mm STEREO OUTPUT jack ຢູ່ເທິງແຜງດ້ານຫນ້າ.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

4.1 ເປີດ/ປິດ

ຫຼັງ​ຈາກ​ການ​ເຊື່ອມ​ຕໍ່​ທັງ​ຫມົດ​ແມ່ນ​ເຮັດ​ໄດ້​, ສະ​ຫຼັບ​ ພະລັງງານປິດ - ປິດ toggle on the front panel to the ON position. The 'pwr' LED will illuminate.

4.2 ການຄວບຄຸມຊ່ອງ

Each of the four input channels (CH 1-4) has independent controls:

• ລະດັບ: Adjusts the input gain for the respective channel. Start with this knob fully counter-clockwise and slowly increase it until the desired volume is achieved without clipping.
• ແພນ: Controls the stereo positioning of the channel's signal between the Left and Right outputs. Turn clockwise for more Right signal, counter-clockwise for more Left signal, and center for an even spread.
• MIC/LINE Switch: Selects between microphone-level and line-level input sensitivity.
• PHANTOM POWER Button: Activates +48V phantom power for condenser microphones connected to that channel.

4.3 ການຄວບຄຸມລະດັບຜົນຜະລິດ

The master output level is controlled by the ລະດັບອອກ knob on the front panel. Adjust this to set the overall volume of the mixed signal sent to the outputs.

4.4 Clip Indicator

ໄດ້ ຄລິບ LED on the front panel illuminates when the input or output signal is too high, indicating potential distortion. If the CLIP LED lights up, reduce the corresponding channel LEVEL or the master OUTPUT LEVEL until the LED no longer illuminates during peak signal levels.

5. ບໍາລຸງຮັກສາ

To ensure the longevity and optimal performance of your Rolls MX401, follow these maintenance guidelines:

• ທໍາຄວາມສະອາດ: Use a soft, dry cloth to clean the exterior of the unit. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the finish.
• ການເກັບຮັກສາ: ເມື່ອບໍ່ໄດ້ໃຊ້ເປັນເວລາດົນ, ໃຫ້ເກັບຮັກສາເຄື່ອງປະສົມໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ ແລະ ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະ ອຸນຫະພູມສູງສຸດ.
• ການປ່ຽນແບັດເຕີຣີ: If using battery power, replace batteries when the 'pwr' LED dims or the unit ceases to function. Remove batteries if the unit will not be used for a long time to prevent leakage.
• ການລະບາຍອາກາດ: ຮັບປະກັນການລະບາຍອາກາດທີ່ເຫມາະສົມຮອບຫນ່ວຍເພື່ອປ້ອງກັນຄວາມຮ້ອນເກີນ. ຫ້າມປິດຊ່ອງລະບາຍອາກາດໃດໆ.

6. ການແກ້ໄຂບັນຫາ

ຖ້າທ່ານພົບບັນຫາກັບ MX401 ຂອງທ່ານ, ໃຫ້ອ້າງອີງເຖິງຂັ້ນຕອນການແກ້ໄຂບັນຫາທົ່ວໄປຕໍ່ໄປນີ້:

• ບໍ່ມີພະລັງງານ:
  • Check if the DC power supply is securely connected and plugged into a working outlet.
  • If using batteries, ensure they are fresh and inserted with correct polarity.
  • Verify the POWER ON-OFF switch is in the ON position.
• ບໍ່ມີສຽງ:
  • Confirm all input and output cables are securely connected.
  • Check that the input device is powered on and sending a signal.
  • Ensure channel LEVEL knobs and the master OUTPUT LEVEL knob are turned up.
  • Verify the MIC/LINE switches are set correctly for your input devices.
  • If using condenser microphones, ensure PHANTOM POWER is activated for the respective channels.
  • Check the volume and input selection on your connected audio system.
• ສຽງບິດເບືອນ / ຕັດ:
  • If the CLIP LED illuminates, reduce the corresponding channel LEVEL or the master OUTPUT LEVEL until it no longer lights up.
  • Ensure the MIC/LINE switches are correctly set. Using MIC setting for a line-level device can cause distortion.
• Hum ຫຼື Noise:
  • ຮັບປະກັນວ່າສາຍໄຟທັງໝົດຢູ່ໃນສະພາບດີ ແລະ ມີການປ້ອງກັນຢ່າງຖືກຕ້ອງ.
  • Try using balanced XLR cables for inputs and outputs to minimize noise.
  • Avoid running audio cables parallel to power cables.

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, or service inquiries regarding your Rolls MX401 mixer, please refer to the documentation included with your purchase or visit the official Rolls website. Contacting the manufacturer directly will provide the most accurate and up-to-date assistance.