UTRAI Jstar 5 Car Battery Jump Starter with Air Compressor User Manual

1. ບົດແນະນຳ

Thank you for choosing the UTRAI Jstar 5 Car Battery Jump Starter with Air Compressor. This versatile device is designed to provide reliable jump-starting for vehicles, inflate tires, and serve as a portable power bank and emergency light. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. ຂໍ້ມູນຄວາມປອດໄພ

• ຄວນໃສ່ສາຍຕາປົກປ້ອງໃນເວລາເຮັດວຽກກັບ ໝໍ້ ໄຟ.
• ຮັບປະກັນການລະບາຍອາກາດທີ່ພຽງພໍໃນລະຫວ່າງການປະຕິບັດງານ.
• Do not smoke or allow sparks or flames near the battery or jump starter.
• ຮັກສາອຸປະກອນໃຫ້ຫ່າງຈາກເດັກນ້ອຍ.
• ເຊື່ອມຕໍ່ jumper clamps correctly: Red to positive (+), Black to negative (-). Incorrect connection can cause damage.
• ຢ່າພະຍາຍາມໂດດເລີ່ມຕົ້ນຫມໍ້ໄຟທີ່ແຊ່ແຂງ.
• Avoid prolonged use of the air compressor to prevent overheating. Allow it to cool down between uses.
• ຢ່າໃຫ້ອຸປະກອນຖືກຝົນ ຫຼື ອຸນຫະພູມສູງ ຫຼື ຕໍ່າ.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ຊຸດ​ຂອງ​ທ່ານ​:

• UTRAI Jstar 5 Jump Starter with Air Compressor
• ສະຫຼາດ Jumper Clamps
• ສາຍສາກ USB-C
• DC Car Charger Adapter
• Various Inflation Nozzles
• ຄູ່ມືຜູ້ໃຊ້
• EVA Protective Carrying Case

4. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

• ເຄື່ອງກະໂດດເລີ່ມຕົ້ນທີ່ມີປະສິດທິພາບ: 3500A peak current for 12V vehicles, capable of starting up to 8.0L gas and 8.0L diesel engines.
• ແບັດເຕີຣີຄວາມຈຸສູງ: 27000mAh internal battery for multiple jump starts and extended power bank use.
• ເຄື່ອງອັດອາກາດປະສົມປະສານ: 150 PSI maximum pressure with an inflation rate of 45 L/Min, suitable for various tires and inflatables.
• ອຸປະກອນຫຼາຍໜ້າທີ່: Combines jump starter, air compressor, portable power bank, and emergency LED light in one compact unit.
• 3 ໂໝດໄຟ LED: Features Normal, Flashing, and SOS modes for illumination and emergency signaling.
• Large LED Digital Screen: Provides clear display of battery status, tire pressure, and operational modes.
• ພອດສາກໄຟອະເນກປະສົງ: Includes QC3.0 USB Output (5V-2.4A), Type-C Input (5V-3A, 9V-2A), and EC5 Output.

5. ຕັ້ງຄ່າ

5.1 ການສາກໄຟເບື້ອງຕົ້ນ

Before first use, fully charge the UTRAI Jstar 5. Connect the USB-C charging cable to the device's Type-C input port and a suitable USB power adapter (not included). The LED screen will indicate the charging status. A full charge is recommended for optimal performance.

5.2 ຄວາມເຂົ້າໃຈກ່ຽວກັບຈໍສະແດງຜົນ

The large LED digital screen displays important information:

• ລະດັບຫມໍ້ໄຟ: Indicates the remaining charge of the internal battery.
• ໜ່ວຍຄວາມດັນ: Displays PSI, BAR, or KPA for the air compressor.
• Output/Input Status: Shows when USB or DC outputs are active, or Type-C input is charging.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

6.1 ໂດດເລີ່ມຕົ້ນຍານພາຫະນະ

1. Ensure the jump starter is sufficiently charged.
2. Insert the smart jumper cable into the EC5 output port on the jump starter.
3. ເຊື່ອມຕໍ່ສີແດງ (+) clamp ໄປທີ່ຈຸດບວກຂອງແບັດເຕີຣີຂອງລົດ.
4. ເຊື່ອມຕໍ່ສີດໍາ (-) clamp ໄປຫາຂົ້ວລົບຂອງແບັດເຕີຣີຂອງຍານພາຫະນະ.
5. Once connected, the smart clamps will indicate readiness (e.g., a green light).
6. ເລີ່ມເຄື່ອງຈັກລົດຂອງທ່ານ.
7. After the engine starts, immediately remove the smart clamps from the car battery, then disconnect the jumper cable from the jump starter.

6.2 Using the Air Compressor (Tire Inflator)

1. Locate the air hose stored on the back of the jump starter.
2. Screw the air hose connector onto the valve stem of the tire or inflatable item.
3. Turn on the jump starter. The screen will display the current pressure.
4. Press the 'M' button to cycle through different inflation modes (e.g., car, motorcycle, bicycle, ball) and select the appropriate one.
5. Use the '+' and '-' buttons to set your desired target pressure.
6. Press the 'OK' button to begin inflation. The compressor will automatically stop once the preset pressure is reached.
7. Disconnect the air hose and store it back in the device.

6.3 ການໃຊ້ເປັນແບັດເຕີຣີສຳຮອງແບບພົກພາ

The UTRAI Jstar 5 can charge various electronic devices:

• Connect your device's USB charging cable to the USB Output port (QC3.0, 5V-2.4A) on the jump starter.
• For devices requiring a Type-C connection, use the Type-C input port for charging the jump starter itself, or if the device supports Type-C output from the jump starter (check device compatibility).
• The DC Output (12V-16V-10A) can power 12V accessories using the appropriate adapter.

6.4 ການນໍາໃຊ້ໄຟ LED

The integrated LED light provides illumination and emergency signaling:

• Press the dedicated light button (often marked with a lightbulb icon) to turn on the light in Normal mode.
• Press the button again to cycle to Flashing mode.
• ກົດຄັ້ງທີສາມສຳລັບໂໝດ SOS.
• ກົດຄັ້ງທີສີ່ເພື່ອປິດໄຟ.

7. ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: ເຊັດອຸປະກອນດ້ວຍຜ້າອ່ອນໆແລະແຫ້ງ. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງ ຫຼື ນໍ້າຢາເຮັດຄວາມສະອາດທີ່ມີສີຂັດ.
• ການເກັບຮັກສາ: Store the UTRAI Jstar 5 in its protective carrying case in a cool, dry place, away from direct sunlight and moisture.
• ກຳລັງສາກໃໝ່: If the device is not used regularly, recharge it every 3-6 months to maintain battery health and prolong its lifespan.

8. ການແກ້ໄຂບັນຫາ

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, or any inquiries regarding your UTRAI Jstar 5, please refer to the warranty card included in your package or visit the official UTRAI webເວັບໄຊທ໌. ລາຍລະອຽດການຕິດຕໍ່ສຳລັບການບໍລິການລູກຄ້າໂດຍປົກກະຕິແລ້ວແມ່ນມີຢູ່ໃນເວັບໄຊທ໌ຂອງຜູ້ຜະລິດ webສະຖານທີ່ຫຼືໃນເອກະສານຜະລິດຕະພັນ.