ສິນຄ້າເກີນview
The Steinberg 100 Series Basin Mixer Faucet (Model 1001010S) is a high-quality single-lever faucet designed for basin installation. It features a modern matte black finish and is constructed from durable brass. This faucet is designed for standing installation and includes a fixed spout, a ceramic cartridge, and flexible G 3/8" connection hoses. It is compatible with instantaneous water heaters from 21 kW.
Image: The Steinberg 100 Series Basin Mixer Faucet in matte black, showcasing its sleek design and single-lever operation.
ເນື້ອໃນຊຸດ
ກະລຸນາກວດສອບວ່າອົງປະກອບທັງໝົດມີຢູ່ກ່ອນທີ່ຈະເລີ່ມການຕິດຕັ້ງ:
- 1 x Steinberg 100 Series Basin Mixer Faucet (Model 1001010S)
- 2 x Flexible connection hoses (G 3/8")
- Mounting hardware (nuts, washers, seals)
- ຄໍາແນະນໍາການຕິດຕັ້ງ
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Professional installation is recommended. Before installation, ensure the water supply is turned off. This faucet requires a single tap hole for mounting.
ເຄື່ອງມືທີ່ຕ້ອງການ (ບໍ່ລວມ):
- wrench ປັບໄດ້
- ໄຂຄວງ
- ເທບປະທັບຕາ (ເທບ PTFE)
- Bucket and cloth for spills
ຂັ້ນຕອນການຕິດຕັ້ງ:
- ກຽມຕົວ Basin: Ensure the mounting surface is clean and dry. The basin should have a single tap hole with a diameter suitable for the faucet's base.
- ເຊື່ອມຕໍ່ທໍ່: Screw the flexible G 3/8" connection hoses into the base of the faucet. Hand-tighten first, then use a wrench for a snug fit, being careful not to overtighten.
- Mount the Faucet: Insert the faucet's threaded rod and hoses through the tap hole in the basin. ຈາກຂ້າງລຸ່ມຂອງ basin, slide the rubber washer, metal washer, and then the mounting nut onto the threaded rod.
- ຮັບປະກັນ Faucet ໄດ້: Align the faucet correctly on the basin and tighten the mounting nut securely with a wrench.
- ເຊື່ອມຕໍ່ກັບແຫຼ່ງນ້ຳປະປາ: Connect the flexible hoses to the hot and cold water supply lines. Use sealant tape on the threads of the supply lines for a watertight seal. Ensure the hot and cold connections are correct (typically red for hot, blue for cold).
- ກວດສອບການຮົ່ວໄຫລ: Slowly turn on the main water supply. Check all connections for leaks. If leaks are present, tighten the connections slightly.
Image: Technical drawing illustrating the dimensions and installation requirements of the Steinberg 100 Series Basin Mixer Faucet, including spout length and overall height.
ຄໍາແນະນໍາການດໍາເນີນງານ
The Steinberg 100 Series Basin Mixer Faucet features a single lever for controlling both water flow and temperature.
- ນ້ຳໄຫຼ: ຍົກຄັນຍົກຂຶ້ນເພື່ອເພີ່ມການໄຫຼຂອງນໍ້າ. ກົດລົງເພື່ອຫຼຸດການໄຫຼ ແລະ ປິດນໍ້າ.
- ການຄວບຄຸມອຸນຫະພູມ: Move the lever to the left for hot water and to the right for cold water. The ceramic cartridge ensures smooth and precise temperature adjustment.
The integrated aerator ensures a soft, splash-free water stream and helps conserve water.
ການບໍາລຸງຮັກສາແລະການດູແລ
To ensure the longevity and appearance of your Steinberg faucet, follow these care instructions:
- ທໍາຄວາມສະອາດ: Clean the faucet regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for bathroom fixtures. Avoid using abrasive sponges, scouring pads, or harsh chemical cleaners, as these can damage the matte black finish.
- ການອົບແຫ້ງ: After cleaning, always dry the faucet thoroughly with a soft, dry cloth to prevent water spots and mineral buildup.
- ການບຳລຸງຮັກສາເຄື່ອງປັ່ນອາກາດ: If water flow becomes weak or uneven, the aerator may be clogged with mineral deposits. Unscrew the aerator from the spout, clean it under running water, and remove any debris. Reinstall the aerator securely.
- ຕະຫລັບເຊລາມິກ: The ceramic cartridge is designed for long-lasting, drip-free performance. If you experience persistent dripping or difficulty in adjusting temperature, it may indicate a need for cartridge replacement. This should be performed by a qualified professional.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ນໍ້າໄຫຼຕໍ່າ | Clogged aerator; partially closed shut-off valves; kinked supply hose. | Clean or replace aerator; fully open shut-off valves; straighten supply hose. |
| ຮົ່ວຢູ່ຖານ | Loose mounting nut; damaged seal. | Tighten mounting nut; inspect and replace seals if damaged. |
| ນ້ ຳ ຕົກຈາກ Spout | ຫມຶກເຊລາມິກທີ່ເສື່ອມສະພາບ. | ຕິດຕໍ່ຊ່າງປະປາທີ່ມີຄຸນວຸດທິສຳລັບການປ່ຽນຕະຫຼັບໝຶກ. |
| ບັນຫາອຸນຫະພູມນ້ໍາ | Incorrect hot/cold connections; issue with water heater. | Verify hose connections; check water heater functionality. |
If the problem persists after attempting these solutions, please contact Steinberg customer support or a qualified plumber.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | 1001010S |
| ຍີ່ຫໍ້ | Steinberg |
| ສີ | Matt ສີດໍາ |
| ວັດສະດຸ | ທອງເຫຼືອງ |
| ແບບ | ເຄື່ອງປະສົມແບບດ່ຽວ |
| ວິທີການຕິດຕັ້ງ | Single Hole (Standing) |
| ຄວາມສູງໂດຍລວມ | 150 ມມ |
| Spout Reach (Projection) | 100 ມມ |
| ເຂດສະດວກສະບາຍ | 50 ມມ |
| ປະເພດ Cartridge | ເຊລາມິກ |
| ທໍ່ເຊື່ອມຕໍ່ | 2x Flexible G 3/8" |
| Flow Rate (at 3 bar) | 6 ລິດ/ນາທີ |
| ຄວາມເຂົ້າກັນໄດ້ | Suitable for instantaneous water heaters from 21 kW |
| ຂະໜາດສິນຄ້າ | 7.5 x 18.5 x 29.5 cm |
ຂໍ້ມູນການຮັບປະກັນ
Steinberg products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Steinberg website. Typically, warranty covers manufacturing defects under normal use and service.
ກະລຸນາຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.
ການຊ່ວຍເຫຼືອລູກຄ້າ
For technical assistance, spare parts, or any questions regarding your Steinberg 100 Series Basin Mixer Faucet, please contact Steinberg customer support.
Webເວັບໄຊ: www.steinberg-armaturen.de
When contacting support, please have your model number (1001010S) and purchase date ready.
